- 根目录:
- drivers
- staging
- rtl8192u
- r8190_rtl8256.c
/*
This is part of the rtl8192 driver
released under the GPL (See file COPYING for details).
This files contains programming code for the rtl8256
radio frontend.
*Many* thanks to Realtek Corp. for their great support!
*/
#include "r8192U.h"
#include "r8192U_hw.h"
#include "r819xU_phyreg.h"
#include "r819xU_phy.h"
#include "r8190_rtl8256.h"
/*--------------------------------------------------------------------------
* Overview: set RF band width (20M or 40M)
* Input: struct net_device* dev
* WIRELESS_BANDWIDTH_E Bandwidth //20M or 40M
* Output: NONE
* Return: NONE
* Note: 8226 support both 20M and 40 MHz
*---------------------------------------------------------------------------*/
void PHY_SetRF8256Bandwidth(struct net_device* dev , HT_CHANNEL_WIDTH Bandwidth) //20M or 40M
{
u8 eRFPath;
struct r8192_priv *priv = ieee80211_priv(dev);
//for(eRFPath = RF90_PATH_A; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
for(eRFPath = 0; eRFPath <RF90_PATH_MAX; eRFPath++)
{
if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath))
continue;
switch(Bandwidth)
{
case HT_CHANNEL_WIDTH_20:
if(priv->card_8192_version == VERSION_819xU_A || priv->card_8192_version == VERSION_819xU_B)// 8256 D-cut, E-cut, xiong: consider it later!
{
rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x0b, bMask12Bits, 0x100); //phy para:1ba
rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x2c, bMask12Bits, 0x3d7);
rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x0e, bMask12Bits, 0x021);
//cosa add for sd3's request 01/23/2008
rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x14, bMask12Bits, 0x5ab);
}
else
{
RT_TRACE(COMP_ERR, "PHY_SetRF8256Bandwidth(): unknown hardware version\n");
}
break;
case HT_CHANNEL_WIDTH_20_40:
if(priv->card_8192_version == VERSION_819xU_A ||priv->card_8192_version == VERSION_819xU_B)// 8256 D-cut, E-cut, xiong: consider it later!
{
rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x0b, bMask12Bits, 0x300); //phy para:3ba
rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x2c, bMask12Bits, 0x3df);
rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x0e, bMask12Bits, 0x0a1);
//cosa add for sd3's request 01/23/2008
if(priv->chan == 3 || priv->chan == 9) //I need to set priv->chan whenever current channel changes
rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x14, bMask12Bits, 0x59b);
else
rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x14, bMask12Bits, 0x5ab);
}
else
{
RT_TRACE(COMP_ERR, "PHY_SetRF8256Bandwidth(): unknown hardware version\n");
}
break;
default:
RT_TRACE(COMP_ERR, "PHY_SetRF8256Bandwidth(): unknown Bandwidth: %#X\n",Bandwidth );
break;
}
}
return;
}
/*--------------------------------------------------------------------------
* Overview: Interface to config 8256
* Input: struct net_device* dev
* Output: NONE
* Return: NONE
*---------------------------------------------------------------------------*/
void PHY_RF8256_Config(struct net_device* dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
// Initialize general global value
//
// TODO: Extend RF_PATH_C and RF_PATH_D in the future
priv->NumTotalRFPath = RTL819X_TOTAL_RF_PATH;
// Config BB and RF
phy_RF8256_Config_ParaFile(dev);
return;
}
/*--------------------------------------------------------------------------
* Overview: Interface to config 8256
* Input: struct net_device* dev
* Output: NONE
* Return: NONE
*---------------------------------------------------------------------------*/
void phy_RF8256_Config_ParaFile(struct net_device* dev)
{
u32 u4RegValue = 0;
//static s1Byte szRadioAFile[] = RTL819X_PHY_RADIO_A;
//static s1Byte szRadioBFile[] = RTL819X_PHY_RADIO_B;
//static s1Byte szRadioCFile[] = RTL819X_PHY_RADIO_C;
//static s1Byte szRadioDFile[] = RTL819X_PHY_RADIO_D;
u8 eRFPath;
BB_REGISTER_DEFINITION_T *pPhyReg;
struct r8192_priv *priv = ieee80211_priv(dev);
u32 RegOffSetToBeCheck = 0x3;
u32 RegValueToBeCheck = 0x7f1;
u32 RF3_Final_Value = 0;
u8 ConstRetryTimes = 5, RetryTimes = 5;
u8 ret = 0;
//3//-----------------------------------------------------------------
//3// <2> Initialize RF
//3//-----------------------------------------------------------------
for(eRFPath = (RF90_RADIO_PATH_E)RF90_PATH_A; eRFPath <priv->NumTotalRFPath; eRFPath++)
{
if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath))
continue;
pPhyReg = &priv->PHYRegDef[eRFPath];
// Joseph test for shorten RF config
// pHalData->RfReg0Value[eRFPath] = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, rGlobalCtrl, bMaskDWord);
/*----Store original RFENV control type----*/
switch(eRFPath)
{
case RF90_PATH_A:
case RF90_PATH_C:
u4RegValue = rtl8192_QueryBBReg(dev, pPhyReg->rfintfs, bRFSI_RFENV);
break;
case RF90_PATH_B :
case RF90_PATH_D:
u4RegValue = rtl8192_QueryBBReg(dev, pPhyReg->rfintfs, bRFSI_RFENV<<16);
break;
}
/*----Set RF_ENV enable----*/
rtl8192_setBBreg(dev, pPhyReg->rfintfe, bRFSI_RFENV<<16, 0x1);
/*----Set RF_ENV output high----*/
rtl8192_setBBreg(dev, pPhyReg->rfintfo, bRFSI_RFENV, 0x1);
/* Set bit number of Address and Data for RF register */
rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, b3WireAddressLength, 0x0); // Set 0 to 4 bits for Z-serial and set 1 to 6 bits for 8258
rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, b3WireDataLength, 0x0); // Set 0 to 12 bits for Z-serial and 8258, and set 1 to 14 bits for ???
rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E) eRFPath, 0x0, bMask12Bits, 0xbf);
/*----Check RF block (for FPGA platform only)----*/
// TODO: this function should be removed on ASIC , Emily 2007.2.2
if (rtl8192_phy_checkBBAndRF(dev, HW90_BLOCK_RF, (RF90_RADIO_PATH_E)eRFPath))
{
RT_TRACE(COMP_ERR, "PHY_RF8256_Config():Check Radio[%d] Fail!!\n", eRFPath);
goto phy_RF8256_Config_ParaFile_Fail;
}
RetryTimes = ConstRetryTimes;
RF3_Final_Value = 0;
/*----Initialize RF fom connfiguration file----*/
switch(eRFPath)
{
case RF90_PATH_A:
while(RF3_Final_Value!=RegValueToBeCheck && RetryTimes!=0)
{
ret = rtl8192_phy_ConfigRFWithHeaderFile(dev,(RF90_RADIO_PATH_E)eRFPath);
RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value);
RetryTimes--;
}
break;
case RF90_PATH_B:
while(RF3_Final_Value!=RegValueToBeCheck && RetryTimes!=0)
{
ret = rtl8192_phy_ConfigRFWithHeaderFile(dev,(RF90_RADIO_PATH_E)eRFPath);
RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value);
RetryTimes--;
}
break;
case RF90_PATH_C:
while(RF3_Final_Value!=RegValueToBeCheck && RetryTimes!=0)
{
ret = rtl8192_phy_ConfigRFWithHeaderFile(dev,(RF90_RADIO_PATH_E)eRFPath);
RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value);
RetryTimes--;
}
break;
case RF90_PATH_D:
while(RF3_Final_Value!=RegValueToBeCheck && RetryTimes!=0)
{
ret = rtl8192_phy_ConfigRFWithHeaderFile(dev,(RF90_RADIO_PATH_E)eRFPath);
RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value);
RetryTimes--;
}
break;
}
/*----Restore RFENV control type----*/;
switch(eRFPath)
{
case RF90_PATH_A:
case RF90_PATH_C:
rtl8192_setBBreg(dev, pPhyReg->rfintfs, bRFSI_RFENV, u4RegValue);
break;
case RF90_PATH_B :
case RF90_PATH_D:
rtl8192_setBBreg(dev, pPhyReg->rfintfs, bRFSI_RFENV<<16, u4RegValue);
break;
}
if(ret){
RT_TRACE(COMP_ERR, "phy_RF8256_Config_ParaFile():Radio[%d] Fail!!", eRFPath);
goto phy_RF8256_Config_ParaFile_Fail;
}
}
RT_TRACE(COMP_PHY, "PHY Initialization Success\n") ;
return ;
phy_RF8256_Config_ParaFile_Fail:
RT_TRACE(COMP_ERR, "PHY Initialization failed\n") ;
return ;
}
void PHY_SetRF8256CCKTxPower(struct net_device* dev, u8 powerlevel)
{
u32 TxAGC=0;
struct r8192_priv *priv = ieee80211_priv(dev);
//modified by vivi, 20080109
TxAGC = powerlevel;
if(priv->bDynamicTxLowPower == TRUE ) //cosa 05/22/2008 for scan
{
if(priv->CustomerID == RT_CID_819x_Netcore)
TxAGC = 0x22;
else
TxAGC += priv->CckPwEnl;
}
if(TxAGC > 0x24)
TxAGC = 0x24;
rtl8192_setBBreg(dev, rTxAGC_CCK_Mcs32, bTxAGCRateCCK, TxAGC);
}
void PHY_SetRF8256OFDMTxPower(struct net_device* dev, u8 powerlevel)
{
struct r8192_priv *priv = ieee80211_priv(dev);
//Joseph TxPower for 8192 testing
u32 writeVal, powerBase0, powerBase1, writeVal_tmp;
u8 index = 0;
u16 RegOffset[6] = {0xe00, 0xe04, 0xe10, 0xe14, 0xe18, 0xe1c};
u8 byte0, byte1, byte2, byte3;
powerBase0 = powerlevel + priv->TxPowerDiff; //OFDM rates
powerBase0 = (powerBase0<<24) | (powerBase0<<16) |(powerBase0<<8) |powerBase0;
powerBase1 = powerlevel; //MCS rates
powerBase1 = (powerBase1<<24) | (powerBase1<<16) |(powerBase1<<8) |powerBase1;
for(index=0; index<6; index++)
{
writeVal = priv->MCSTxPowerLevelOriginalOffset[index] + ((index<2)?powerBase0:powerBase1);
byte0 = (u8)(writeVal & 0x7f);
byte1 = (u8)((writeVal & 0x7f00)>>8);
byte2 = (u8)((writeVal & 0x7f0000)>>16);
byte3 = (u8)((writeVal & 0x7f000000)>>24);
if(byte0 > 0x24) // Max power index = 0x24
byte0 = 0x24;
if(byte1 > 0x24)
byte1 = 0x24;
if(byte2 > 0x24)
byte2 = 0x24;
if(byte3 > 0x24)
byte3 = 0x24;
//for tx power track
if(index == 3)
{
writeVal_tmp = (byte3<<24) | (byte2<<16) |(byte1<<8) |byte0;
priv->Pwr_Track = writeVal_tmp;
}
if(priv->bDynamicTxHighPower == TRUE) //Add by Jacken 2008/03/06
{
// Emily, 20080613. Set low tx power for both MCS and legacy OFDM
writeVal = 0x03030303;
}
else
{
writeVal = (byte3<<24) | (byte2<<16) |(byte1<<8) |byte0;
}
rtl8192_setBBreg(dev, RegOffset[index], 0x7f7f7f7f, writeVal);
}
return;
}