- 根目录:
- drivers
- staging
- winbond
- localpara.h
#ifndef __WINBOND_LOCALPARA_H
#define __WINBOND_LOCALPARA_H
/*
* =============================================================
* LocalPara.h -
* =============================================================
*/
#include "mac_structures.h"
/* Define the local ability */
#define LOCAL_DEFAULT_BEACON_PERIOD 100 /* ms */
#define LOCAL_DEFAULT_ATIM_WINDOW 0
#define LOCAL_DEFAULT_ERP_CAPABILITY 0x0431 /*
* 0x0001: ESS
* 0x0010: Privacy
* 0x0020: short preamble
* 0x0400: short slot time
*/
#define LOCAL_DEFAULT_LISTEN_INTERVAL 5
#define LOCAL_DEFAULT_24_CHANNEL_NUM 13 /* channel 1..13 */
#define LOCAL_DEFAULT_5_CHANNEL_NUM 8 /* channel 36..64 */
#define LOCAL_USA_24_CHANNEL_NUM 11
#define LOCAL_USA_5_CHANNEL_NUM 12
#define LOCAL_EUROPE_24_CHANNEL_NUM 13
#define LOCAL_EUROPE_5_CHANNEL_NUM 19
#define LOCAL_JAPAN_24_CHANNEL_NUM 14
#define LOCAL_JAPAN_5_CHANNEL_NUM 11
#define LOCAL_UNKNOWN_24_CHANNEL_NUM 14
#define LOCAL_UNKNOWN_5_CHANNEL_NUM 34 /* not include 165 */
#define psLOCAL (&(adapter->sLocalPara))
#define MODE_802_11_BG 0
#define MODE_802_11_A 1
#define MODE_802_11_ABG 2
#define MODE_802_11_BG_IBSS 3
#define MODE_802_11_B 4
#define MODE_AUTO 255
#define BAND_TYPE_DSSS 0
#define BAND_TYPE_OFDM_24 1
#define BAND_TYPE_OFDM_5 2
/* refer Bitmap2RateValue table */
/* the bitmap value of all the H/W supported rates: */
/* 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54 */
#define LOCAL_ALL_SUPPORTED_RATES_BITMAP 0x130c1a66
/* the bitmap value of all the H/W supported rates except to non-OFDM rates: */
/* 6, 9, 12, 18, 24, 36, 48, 54 */
#define LOCAL_OFDM_SUPPORTED_RATES_BITMAP 0x130c1240
#define LOCAL_11B_SUPPORTED_RATE_BITMAP 0x826
#define LOCAL_11B_BASIC_RATE_BITMAP 0x826
#define LOCAL_11B_OPERATION_RATE_BITMAP 0x826
#define LOCAL_11G_BASIC_RATE_BITMAP 0x826 /* 1, 2, 5.5, 11 */
#define LOCAL_11G_OPERATION_RATE_BITMAP 0x130c1240 /* 6, 9, 12, 18, 24, 36, 48, 54 */
#define LOCAL_11A_BASIC_RATE_BITMAP 0x01001040 /* 6, 12, 24 */
#define LOCAL_11A_OPERATION_RATE_BITMAP 0x120c0200 /* 9, 18, 36, 48, 54 */
#define PWR_ACTIVE 0
#define PWR_SAVE 1
#define PWR_TX_IDLE_CYCLE 6
/* bPreambleMode and bSlotTimeMode */
#define AUTO_MODE 0
#define LONG_MODE 1
/* Region definition */
#define REGION_AUTO 0xff
#define REGION_UNKNOWN 0
#define REGION_EUROPE 1 /* ETSI */
#define REGION_JAPAN 2 /* MKK */
#define REGION_USA 3 /* FCC */
#define REGION_FRANCE 4 /* FRANCE */
#define REGION_SPAIN 5 /* SPAIN */
#define REGION_ISRAEL 6 /* ISRAEL */
#define MAX_BSS_DESCRIPT_ELEMENT 32
#define MAX_PMKID_CandidateList 16
/*
* High byte : Event number, low byte : reason
* Event definition
* -- SME/MLME event
*/
#define EVENT_RCV_DEAUTH 0x0100
#define EVENT_JOIN_FAIL 0x0200
#define EVENT_AUTH_FAIL 0x0300
#define EVENT_ASSOC_FAIL 0x0400
#define EVENT_LOST_SIGNAL 0x0500
#define EVENT_BSS_DESCRIPT_LACK 0x0600
#define EVENT_COUNTERMEASURE 0x0700
#define EVENT_JOIN_FILTER 0x0800
/* -- TX/RX event */
#define EVENT_RX_BUFF_UNAVAILABLE 0x4100
#define EVENT_CONNECT 0x8100
#define EVENT_DISCONNECT 0x8200
#define EVENT_SCAN_REQ 0x8300
/* Reason of Event */
#define EVENT_REASON_FILTER_BASIC_RATE 0x0001
#define EVENT_REASON_FILTER_PRIVACY 0x0002
#define EVENT_REASON_FILTER_AUTH_MODE 0x0003
#define EVENT_REASON_TIMEOUT 0x00ff
/* Due to[E id][Length][OUI][Data] may be 257 bytes */
#define MAX_IE_APPEND_SIZE (256 + 4)
struct chan_info {
u8 band;
u8 ChanNo;
};
struct radio_off {
u8 boHwRadioOff;
u8 boSwRadioOff;
};
struct wb_local_para {
/* read from EPROM, manufacture set for each NetCard */
u8 PermanentAddress[MAC_ADDR_LENGTH + 2];
/* the driver will use this one actually. */
u8 ThisMacAddress[MAC_ADDR_LENGTH + 2];
u32 MTUsize; /* Ind to Uplayer, Max transmission unit size */
u8 region_INF; /* region setting from INF */
u8 region; /* real region setting of the device */
u8 Reserved_1[2];
/* power-save variables */
u8 iPowerSaveMode; /* 0 indicates on, 1 indicates off */
u8 ATIMmode;
u8 ExcludeUnencrypted;
/* Unit ime count for the decision to enter PS mode */
u16 CheckCountForPS;
u8 boHasTxActivity;/* tx activity has occurred */
u8 boMacPsValid; /* Power save mode obtained from H/W is valid or not */
/* Rate */
u8 TxRateMode; /*
* Initial, input from Registry,
* may be updated by GUI
* Tx Rate Mode: auto(DTO on), max, 1M, 2M, ..
*/
u8 CurrentTxRate; /* The current Tx rate */
u8 CurrentTxRateForMng; /*
* The current Tx rate for management
* frames. It will be decided before
* connection succeeds.
*/
u8 CurrentTxFallbackRate;
/* for Rate handler */
u8 BRateSet[32]; /* basic rate set */
u8 SRateSet[32]; /* support rate set */
u8 NumOfBRate;
u8 NumOfSRate;
u8 NumOfDsssRateInSRate; /* number of DSSS rates in supported rate set */
u8 reserved1;
u32 dwBasicRateBitmap; /* bit map of basic rates */
u32 dwSupportRateBitmap; /* bit map of all support rates including basic and operational rates */
/* For SME/MLME handler */
u16 wOldSTAindex; /* valid when boHandover=TRUE, store old connected STA index */
u16 wConnectedSTAindex; /* Index of peerly connected AP or IBSS in the descriptionset. */
u16 Association_ID; /* The Association ID in the (Re)Association Response frame. */
u16 ListenInterval; /* The listen interval when SME invoking MLME_ (Re)Associate_Request(). */
struct radio_off RadioOffStatus;
u8 Reserved0[2];
u8 boMsRadioOff; /* Ndis demands to be true when set Disassoc. OID and be false when set SSID OID. */
u8 bAntennaNo; /* which antenna */
u8 bConnectFlag; /* the connect status flag for roaming task */
u8 RoamStatus;
u8 reserved7[3];
struct chan_info CurrentChan; /* Current channel no. and channel band. It may be changed by scanning. */
u8 boHandover; /* Roaming, Hnadover to other AP. */
u8 boCCAbusy;
u16 CWMax; /* It may not be the real value that H/W used */
u8 CWMin; /* 255: set according to 802.11 spec. */
u8 reserved2;
/* 11G: */
u8 bMacOperationMode; /* operation in 802.11b or 802.11g */
u8 bSlotTimeMode; /* AUTO, s32 */
u8 bPreambleMode; /* AUTO, s32 */
u8 boNonERPpresent;
u8 boProtectMechanism; /* H/W will take the necessary action based on this variable */
u8 boShortPreamble; /* Same here */
u8 boShortSlotTime; /* Same here */
u8 reserved_3;
u32 RSN_IE_Bitmap;
u32 RSN_OUI_Type;
/* For the BSSID */
u8 HwBssid[MAC_ADDR_LENGTH + 2];
u32 HwBssidValid;
/* For scan list */
u8 BssListCount; /* Total count of valid descriptor indexes */
u8 boReceiveUncorrectInfo; /* important settings in beacon/probe resp. have been changed */
u8 NoOfJoinerInIbss;
u8 reserved_4;
/* Store the valid descriptor indexes obtained from scannings */
u8 BssListIndex[(MAX_BSS_DESCRIPT_ELEMENT + 3) & ~0x03];
/*
* Save the BssDescriptor index in this IBSS.
* The index 0 is local descriptor (psLOCAL->wConnectedSTAindex).
* If CONNECTED : NoOfJoinerInIbss >= 2
* else : NoOfJoinerInIbss <= 1
*/
u8 JoinerInIbss[(MAX_BSS_DESCRIPT_ELEMENT + 3) & ~0x03];
/* General Statistics, count at Rx_handler or Tx_callback interrupt handler */
u64 GS_XMIT_OK; /* Good Frames Transmitted */
u64 GS_RCV_OK; /* Good Frames Received */
u32 GS_RCV_ERROR; /* Frames received with crc error */
u32 GS_XMIT_ERROR; /* Bad Frames Transmitted */
u32 GS_RCV_NO_BUFFER; /* Receive Buffer underrun */
u32 GS_XMIT_ONE_COLLISION; /* one collision */
u32 GS_XMIT_MORE_COLLISIONS;/* more collisions */
/*
* ================================================================
* Statistics (no matter whether it had done successfully) -wkchen
* ================================================================
*/
u32 _NumRxMSDU;
u32 _NumTxMSDU;
u32 _dot11WEPExcludedCount;
u32 _dot11WEPUndecryptableCount;
u32 _dot11FrameDuplicateCount;
struct chan_info IbssChanSetting; /* 2B. Start IBSS Channel setting by registry or WWU. */
u8 reserved_5[2]; /* It may not be used after considering RF type, region and modulation type. */
u8 reserved_6[2]; /* two variables are for wep key error detection */
u32 bWepKeyError;
u32 bToSelfPacketReceived;
u32 WepKeyDetectTimerCount;
u16 SignalLostTh;
u16 SignalRoamTh;
u8 IE_Append_data[MAX_IE_APPEND_SIZE];
u16 IE_Append_size;
u16 reserved_7;
};
#endif