/* * at91rm9200ek.dts - Device Tree file for Atmel AT91RM9200 evaluation kit * * Copyright (C) 2012 Joachim Eastwood <manabian@gmail.com> * * Licensed under GPLv2 only */ /dts-v1/; #include "at91rm9200.dtsi" / { model = "Atmel AT91RM9200 evaluation kit"; compatible = "atmel,at91rm9200ek", "atmel,at91rm9200"; memory { reg = <0x20000000 0x4000000>; }; clocks { #address-cells = <1>; #size-cells = <1>; ranges; main_clock: clock@0 { compatible = "atmel,osc", "fixed-clock"; clock-frequency = <18432000>; }; slow_xtal { clock-frequency = <32768>; }; main_xtal { clock-frequency = <18432000>; }; }; ahb { apb { usb1: gadget@fffb0000 { atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>; atmel,pullup-gpio = <&pioD 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; macb0: ethernet@fffbc000 { phy-mode = "rmii"; status = "okay"; phy0: ethernet-phy { interrupt-parent = <&pioC>; interrupts = <4 IRQ_TYPE_EDGE_BOTH>; }; }; usart1: serial@fffc4000 { pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_rts &pinctrl_uart1_cts &pinctrl_uart1_dtr_dsr &pinctrl_uart1_dcd &pinctrl_uart1_ri>; status = "okay"; }; spi0: spi@fffe0000 { status = "okay"; cs-gpios = <&pioA 3 0>, <0>, <0>, <0>; mtd_dataflash@0 { compatible = "atmel,at45", "atmel,dataflash"; spi-max-frequency = <15000000>; reg = <0>; }; }; dbgu: serial@fffff200 { status = "okay"; }; rtc: rtc@fffffe00 { status = "okay"; }; }; usb0: ohci@00300000 { num-ports = <2>; status = "okay"; }; nor_flash@10000000 { compatible = "cfi-flash"; reg = <0x10000000 0x800000>; linux,mtd-name = "physmap-flash.0"; bank-width = <2>; #address-cells = <1>; #size-cells = <1>; barebox@0 { label = "barebox"; reg = <0x00000 0x40000>; }; bareboxenv@40000 { label = "bareboxenv"; reg = <0x40000 0x10000>; }; kernel@50000 { label = "kernel"; reg = <0x50000 0x300000>; }; root@350000 { label = "root"; reg = <0x350000 0x4B0000>; }; }; }; leds { compatible = "gpio-leds"; ds2 { label = "green"; gpios = <&pioB 0 GPIO_ACTIVE_LOW>; linux,default-trigger = "mmc0"; }; ds4 { label = "yellow"; gpios = <&pioB 1 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; }; ds6 { label = "red"; gpios = <&pioB 2 GPIO_ACTIVE_LOW>; }; }; };