/* * Broadcom BCM63138 DSL SoCs Device Tree */ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> #include "skeleton.dtsi" / { compatible = "brcm,bcm63138"; model = "Broadcom BCM63138 DSL SoC"; interrupt-parent = <&gic>; aliases { uart0 = &serial0; uart1 = &serial1; }; cpus { #address-cells = <1>; #size-cells = <0>; cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a9"; next-level-cache = <&L2>; reg = <0>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; next-level-cache = <&L2>; reg = <1>; }; }; clocks { #address-cells = <1>; #size-cells = <0>; arm_timer_clk: arm_timer_clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <500000000>; }; periph_clk: periph_clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <50000000>; clock-output-names = "periph"; }; }; /* ARM bus */ axi@80000000 { compatible = "simple-bus"; ranges = <0 0x80000000 0x784000>; #address-cells = <1>; #size-cells = <1>; L2: cache-controller@1d000 { compatible = "arm,pl310-cache"; reg = <0x1d000 0x1000>; cache-unified; cache-level = <2>; cache-size = <524288>; cache-sets = <1024>; cache-line-size = <32>; interrupts = <GIC_PPI 0 IRQ_TYPE_LEVEL_HIGH>; }; scu: scu@1e000 { compatible = "arm,cortex-a9-scu"; reg = <0x1e000 0x100>; }; gic: interrupt-controller@1e100 { compatible = "arm,cortex-a9-gic"; reg = <0x1f000 0x1000 0x1e100 0x100>; #interrupt-cells = <3>; #address-cells = <0>; interrupt-controller; }; global_timer: timer@1e200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x1e200 0x20>; interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; clocks = <&arm_timer_clk>; }; local_timer: local-timer@1e600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x1e600 0x20>; interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>; clocks = <&arm_timer_clk>; }; twd_watchdog: watchdog@1e620 { compatible = "arm,cortex-a9-twd-wdt"; reg = <0x1e620 0x20>; interrupts = <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>; }; }; /* Legacy UBUS base */ ubus@fffe8000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xfffe8000 0x8100>; serial0: serial@600 { compatible = "brcm,bcm6345-uart"; reg = <0x600 0x1b>; interrupts = <GIC_SPI 32 0>; clocks = <&periph_clk>; clock-names = "periph"; status = "disabled"; }; serial1: serial@620 { compatible = "brcm,bcm6345-uart"; reg = <0x620 0x1b>; interrupts = <GIC_SPI 33 0>; clocks = <&periph_clk>; clock-names = "periph"; status = "disabled"; }; }; };