/* * Reference Device Tree Source for the Bock-W board * * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> * * based on r8a7779 * * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Simon Horman * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any * kind, whether express or implied. */ /dts-v1/; #include "r8a7778.dtsi" #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> / { model = "bockw"; compatible = "renesas,bockw-reference", "renesas,r8a7778"; aliases { serial0 = &scif0; }; chosen { bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp rw"; stdout-path = &scif0; }; memory { device_type = "memory"; reg = <0x60000000 0x10000000>; }; fixedregulator3v3: fixedregulator@0 { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; ethernet@18300000 { compatible = "smsc,lan9220", "smsc,lan9115"; reg = <0x18300000 0x1000>; phy-mode = "mii"; interrupt-parent = <&irqpin>; interrupts = <0 IRQ_TYPE_EDGE_FALLING>; reg-io-width = <4>; vddvario-supply = <&fixedregulator3v3>; vdd33a-supply = <&fixedregulator3v3>; }; }; &mmcif { pinctrl-0 = <&mmc_pins>; pinctrl-names = "default"; vmmc-supply = <&fixedregulator3v3>; bus-width = <8>; broken-cd; status = "okay"; }; &irqpin { status = "okay"; }; &tmu0 { status = "okay"; }; &pfc { scif0_pins: serial0 { renesas,groups = "scif0_data_a", "scif0_ctrl"; renesas,function = "scif0"; }; mmc_pins: mmc { renesas,groups = "mmc_data8", "mmc_ctrl"; renesas,function = "mmc"; }; sdhi0_pins: sd0 { renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd"; renesas,function = "sdhi0"; }; hspi0_pins: hspi0 { renesas,groups = "hspi0_a"; renesas,function = "hspi0"; }; }; &sdhi0 { pinctrl-0 = <&sdhi0_pins>; pinctrl-names = "default"; vmmc-supply = <&fixedregulator3v3>; bus-width = <4>; status = "okay"; wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; }; &hspi0 { pinctrl-0 = <&hspi0_pins>; pinctrl-names = "default"; status = "okay"; flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "spansion,s25fl008k"; reg = <0>; spi-max-frequency = <104000000>; m25p,fast-read; partition@0 { label = "data(spi)"; reg = <0x00000000 0x00100000>; }; }; }; &scif0 { pinctrl-0 = <&scif0_pins>; pinctrl-names = "default"; status = "okay"; };