/*
* Device Tree Source for the KZM-A9-GT board
*
* Copyright (C) 2012 Horms Solutions Ltd.
*
* Based on sh73a0-kzm9g.dts
* Copyright (C) 2012 Renesas Solutions Corp.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/dts-v1/;
#include "sh73a0.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "KZM-A9-GT";
compatible = "renesas,kzm9g", "renesas,sh73a0";
aliases {
serial4 = &scifa4;
};
cpus {
cpu@0 {
cpu0-supply = <&vdd_dvfs>;
operating-points = <
/* kHz uV */
1196000 1315000
598000 1175000
398667 1065000
>;
voltage-tolerance = <1>; /* 1% */
};
};
chosen {
bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel rw";
stdout-path = &scifa4;
};
memory {
device_type = "memory";
reg = <0x40000000 0x20000000>;
};
reg_1p8v: regulator@0 {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
reg_3p3v: regulator@1 {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
vmmc_sdhi0: regulator@2 {
compatible = "regulator-fixed";
regulator-name = "SDHI0 Vcc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&pfc 15 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vmmc_sdhi2: regulator@3 {
compatible = "regulator-fixed";
regulator-name = "SDHI2 Vcc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&pfc 14 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
leds {
compatible = "gpio-leds";
led1 {
gpios = <&pfc 20 GPIO_ACTIVE_LOW>;
label = "LED1";
};
led2 {
gpios = <&pfc 21 GPIO_ACTIVE_LOW>;
label = "LED2";
};
led3 {
gpios = <&pfc 22 GPIO_ACTIVE_LOW>;
label = "LED3";
};
led4 {
gpios = <&pfc 23 GPIO_ACTIVE_LOW>;
label = "LED4";
};
};
keyboard {
compatible = "gpio-keys";
back-key {
gpios = <&pcf8575 8 GPIO_ACTIVE_LOW>;
linux,code = <KEY_BACK>;
label = "SW3";
};
right-key {
gpios = <&pcf8575 9 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RIGHT>;
label = "SW2-R";
};
left-key {
gpios = <&pcf8575 10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_LEFT>;
label = "SW2-L";
};
enter-key {
gpios = <&pcf8575 11 GPIO_ACTIVE_LOW>;
linux,code = <KEY_ENTER>;
label = "SW2-P";
};
up-key {
gpios = <&pcf8575 12 GPIO_ACTIVE_LOW>;
linux,code = <KEY_UP>;
label = "SW2-U";
};
down-key {
gpios = <&pcf8575 13 GPIO_ACTIVE_LOW>;
linux,code = <KEY_DOWN>;
label = "SW2-D";
};
home-key {
gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
label = "SW1";
};
};
sound {
compatible = "simple-audio-card";
simple-audio-card,format = "left_j";
simple-audio-card,cpu {
sound-dai = <&sh_fsi2 0>;
};
simple-audio-card,codec {
sound-dai = <&ak4648>;
bitclock-master;
frame-master;
system-clock-frequency = <11289600>;
};
};
};
&bsc {
ethernet@10000000 {
compatible = "smsc,lan9220", "smsc,lan9115";
reg = <0x10000000 0x100>;
phy-mode = "mii";
interrupt-parent = <&irqpin0>;
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
reg-io-width = <4>;
smsc,irq-push-pull;
smsc,save-mac-address;
vddvario-supply = <®_1p8v>;
vdd33a-supply = <®_3p3v>;
};
};
&cmt1 {
status = "okay";
};
&extal2_clk {
clock-frequency = <48000000>;
};
&i2c0 {
status = "okay";
compass@c {
compatible = "asahi-kasei,ak8975";
reg = <0x0c>;
interrupt-parent = <&irqpin3>;
interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
};
ak4648: codec@12 {
compatible = "asahi-kasei,ak4648";
reg = <0x12>;
#sound-dai-cells = <0>;
};
accelerometer@1d {
compatible = "adi,adxl34x";
reg = <0x1d>;
interrupt-parent = <&irqpin3>;
interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
<3 IRQ_TYPE_LEVEL_HIGH>;
};
rtc@32 {
compatible = "ricoh,r2025sd";
reg = <0x32>;
};
as3711@40 {
compatible = "ams,as3711";
reg = <0x40>;
regulators {
vdd_dvfs: sd1 {
regulator-name = "1.315V CPU";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
};
sd2 {
regulator-name = "1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
sd4 {
regulator-name = "1.215V";
regulator-min-microvolt = <1215000>;
regulator-max-microvolt = <1235000>;
regulator-always-on;
regulator-boot-on;
};
ldo2 {
regulator-name = "2.8V CPU";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
regulator-boot-on;
};
ldo3 {
regulator-name = "3.0V CPU";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
regulator-boot-on;
};
ldo4 {
regulator-name = "2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
regulator-boot-on;
};
ldo5 {
regulator-name = "2.8V #2";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
regulator-boot-on;
};
ldo7 {
regulator-name = "1.15V CPU";
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1150000>;
regulator-always-on;
regulator-boot-on;
};
ldo8 {
regulator-name = "1.15V CPU #2";
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1150000>;
regulator-always-on;
regulator-boot-on;
};
};
};
};
&i2c1 {
status = "okay";
touchscreen@55 {
compatible = "sitronix,st1232";
reg = <0x55>;
interrupt-parent = <&irqpin1>;
interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
};
};
&i2c3 {
pinctrl-0 = <&i2c3_pins>;
pinctrl-names = "default";
status = "okay";
pcf8575: gpio@20 {
compatible = "nxp,pcf8575";
reg = <0x20>;
interrupt-parent = <&irqpin2>;
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
&mmcif {
pinctrl-0 = <&mmcif_pins>;
pinctrl-names = "default";
bus-width = <8>;
vmmc-supply = <®_1p8v>;
status = "okay";
};
&pfc {
i2c3_pins: i2c3 {
renesas,groups = "i2c3_1";
renesas,function = "i2c3";
};
mmcif_pins: mmc {
mux {
renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0";
renesas,function = "mmc0";
};
cfg {
renesas,groups = "mmc0_data8_0";
renesas,pins = "PORT279";
bias-pull-up;
};
};
scifa4_pins: serial4 {
renesas,groups = "scifa4_data", "scifa4_ctrl";
renesas,function = "scifa4";
};
sdhi0_pins: sd0 {
renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp";
renesas,function = "sdhi0";
};
sdhi2_pins: sd2 {
renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
renesas,function = "sdhi2";
};
fsia_pins: sounda {
renesas,groups = "fsia_mclk_in", "fsia_sclk_in",
"fsia_data_in", "fsia_data_out";
renesas,function = "fsia";
};
};
&scifa4 {
pinctrl-0 = <&scifa4_pins>;
pinctrl-names = "default";
status = "okay";
};
&sdhi0 {
pinctrl-0 = <&sdhi0_pins>;
pinctrl-names = "default";
vmmc-supply = <&vmmc_sdhi0>;
bus-width = <4>;
status = "okay";
};
&sdhi2 {
pinctrl-0 = <&sdhi2_pins>;
pinctrl-names = "default";
vmmc-supply = <&vmmc_sdhi2>;
bus-width = <4>;
broken-cd;
status = "okay";
};
&sh_fsi2 {
pinctrl-0 = <&fsia_pins>;
pinctrl-names = "default";
status = "okay";
};