/*
* DTS file for all SPEAr1310 SoCs
*
* Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/include/ "spear13xx.dtsi"
/ {
compatible = "st,spear1310";
ahb {
spics: spics@e0700000{
compatible = "st,spear-spics-gpio";
reg = <0xe0700000 0x1000>;
st-spics,peripcfg-reg = <0x3b0>;
st-spics,sw-enable-bit = <12>;
st-spics,cs-value-bit = <11>;
st-spics,cs-enable-mask = <3>;
st-spics,cs-enable-shift = <8>;
gpio-controller;
#gpio-cells = <2>;
};
miphy0: miphy@eb800000 {
compatible = "st,spear1310-miphy";
reg = <0xeb800000 0x4000>;
misc = <&misc>;
phy-id = <0>;
#phy-cells = <1>;
status = "disabled";
};
miphy1: miphy@eb804000 {
compatible = "st,spear1310-miphy";
reg = <0xeb804000 0x4000>;
misc = <&misc>;
phy-id = <1>;
#phy-cells = <1>;
status = "disabled";
};
miphy2: miphy@eb808000 {
compatible = "st,spear1310-miphy";
reg = <0xeb808000 0x4000>;
misc = <&misc>;
phy-id = <2>;
#phy-cells = <1>;
status = "disabled";
};
ahci0: ahci@b1000000 {
compatible = "snps,spear-ahci";
reg = <0xb1000000 0x10000>;
interrupts = <0 68 0x4>;
phys = <&miphy0 0>;
phy-names = "sata-phy";
status = "disabled";
};
ahci1: ahci@b1800000 {
compatible = "snps,spear-ahci";
reg = <0xb1800000 0x10000>;
interrupts = <0 69 0x4>;
phys = <&miphy1 0>;
phy-names = "sata-phy";
status = "disabled";
};
ahci2: ahci@b4000000 {
compatible = "snps,spear-ahci";
reg = <0xb4000000 0x10000>;
interrupts = <0 70 0x4>;
phys = <&miphy2 0>;
phy-names = "sata-phy";
status = "disabled";
};
pcie0: pcie@b1000000 {
compatible = "st,spear1340-pcie", "snps,dw-pcie";
reg = <0xb1000000 0x4000>, <0x80000000 0x20000>;
reg-names = "dbi", "config";
interrupts = <0 68 0x4>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0x0 0 &gic 0 68 0x4>;
num-lanes = <1>;
phys = <&miphy0 1>;
phy-names = "pcie-phy";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
ranges = <0x81000000 0 0 0x80020000 0 0x00010000 /* downstream I/O */
0x82000000 0 0x80030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */
status = "disabled";
};
pcie1: pcie@b1800000 {
compatible = "st,spear1340-pcie", "snps,dw-pcie";
reg = <0xb1800000 0x4000>, <0x90000000 0x20000>;
reg-names = "dbi", "config";
interrupts = <0 69 0x4>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0x0 0 &gic 0 69 0x4>;
num-lanes = <1>;
phys = <&miphy1 1>;
phy-names = "pcie-phy";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
ranges = <0x81000000 0 0 0x90020000 0 0x00010000 /* downstream I/O */
0x82000000 0 0x90030000 0x90030000 0 0x0ffd0000>; /* non-prefetchable memory */
status = "disabled";
};
pcie2: pcie@b4000000 {
compatible = "st,spear1340-pcie", "snps,dw-pcie";
reg = <0xb4000000 0x4000>, <0xc0000000 0x20000>;
reg-names = "dbi", "config";
interrupts = <0 70 0x4>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0x0 0 &gic 0 70 0x4>;
num-lanes = <1>;
phys = <&miphy2 1>;
phy-names = "pcie-phy";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
ranges = <0x81000000 0 0 0xc0020000 0 0x00010000 /* downstream I/O */
0x82000000 0 0xc0030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */
status = "disabled";
};
gmac1: eth@5c400000 {
compatible = "st,spear600-gmac";
reg = <0x5c400000 0x8000>;
interrupts = <0 95 0x4>;
interrupt-names = "macirq";
phy-mode = "mii";
status = "disabled";
};
gmac2: eth@5c500000 {
compatible = "st,spear600-gmac";
reg = <0x5c500000 0x8000>;
interrupts = <0 96 0x4>;
interrupt-names = "macirq";
phy-mode = "mii";
status = "disabled";
};
gmac3: eth@5c600000 {
compatible = "st,spear600-gmac";
reg = <0x5c600000 0x8000>;
interrupts = <0 97 0x4>;
interrupt-names = "macirq";
phy-mode = "rmii";
status = "disabled";
};
gmac4: eth@5c700000 {
compatible = "st,spear600-gmac";
reg = <0x5c700000 0x8000>;
interrupts = <0 98 0x4>;
interrupt-names = "macirq";
phy-mode = "rgmii";
status = "disabled";
};
pinmux: pinmux@e0700000 {
compatible = "st,spear1310-pinmux";
reg = <0xe0700000 0x1000>;
#gpio-range-cells = <3>;
};
apb {
i2c1: i2c@5cd00000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0x5cd00000 0x1000>;
interrupts = <0 87 0x4>;
status = "disabled";
};
i2c2: i2c@5ce00000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0x5ce00000 0x1000>;
interrupts = <0 88 0x4>;
status = "disabled";
};
i2c3: i2c@5cf00000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0x5cf00000 0x1000>;
interrupts = <0 89 0x4>;
status = "disabled";
};
i2c4: i2c@5d000000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0x5d000000 0x1000>;
interrupts = <0 90 0x4>;
status = "disabled";
};
i2c5: i2c@5d100000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0x5d100000 0x1000>;
interrupts = <0 91 0x4>;
status = "disabled";
};
i2c6: i2c@5d200000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0x5d200000 0x1000>;
interrupts = <0 92 0x4>;
status = "disabled";
};
i2c7: i2c@5d300000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0x5d300000 0x1000>;
interrupts = <0 93 0x4>;
status = "disabled";
};
spi1: spi@5d400000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x5d400000 0x1000>;
interrupts = <0 99 0x4>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
serial@5c800000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x5c800000 0x1000>;
interrupts = <0 82 0x4>;
status = "disabled";
};
serial@5c900000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x5c900000 0x1000>;
interrupts = <0 83 0x4>;
status = "disabled";
};
serial@5ca00000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x5ca00000 0x1000>;
interrupts = <0 84 0x4>;
status = "disabled";
};
serial@5cb00000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x5cb00000 0x1000>;
interrupts = <0 85 0x4>;
status = "disabled";
};
serial@5cc00000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x5cc00000 0x1000>;
interrupts = <0 86 0x4>;
status = "disabled";
};
thermal@e07008c4 {
st,thermal-flags = <0x7000>;
};
gpiopinctrl: gpio@d8400000 {
compatible = "st,spear-plgpio";
reg = <0xd8400000 0x1000>;
interrupts = <0 100 0x4>;
#interrupt-cells = <1>;
interrupt-controller;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinmux 0 0 246>;
status = "disabled";
st-plgpio,ngpio = <246>;
st-plgpio,enb-reg = <0xd0>;
st-plgpio,wdata-reg = <0x90>;
st-plgpio,dir-reg = <0xb0>;
st-plgpio,ie-reg = <0x30>;
st-plgpio,rdata-reg = <0x70>;
st-plgpio,mis-reg = <0x10>;
st-plgpio,eit-reg = <0x50>;
};
};
};
};