/* * DTS file for SPEAr310 SoC * * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License * Version 2 or later at the following locations: * * http://www.opensource.org/licenses/gpl-license.html * http://www.gnu.org/copyleft/gpl.html */ /include/ "spear3xx.dtsi" / { ahb { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; ranges = <0x40000000 0x40000000 0x10000000 0xb0000000 0xb0000000 0x10000000 0xd0000000 0xd0000000 0x30000000>; pinmux: pinmux@b4000000 { compatible = "st,spear310-pinmux"; reg = <0xb4000000 0x1000>; #gpio-range-cells = <3>; }; fsmc: flash@44000000 { compatible = "st,spear600-fsmc-nand"; #address-cells = <1>; #size-cells = <1>; reg = <0x44000000 0x1000 /* FSMC Register */ 0x40000000 0x0010 /* NAND Base DATA */ 0x40020000 0x0010 /* NAND Base ADDR */ 0x40010000 0x0010>; /* NAND Base CMD */ reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd"; status = "disabled"; }; shirq: interrupt-controller@0xb4000000 { compatible = "st,spear310-shirq"; reg = <0xb4000000 0x1000>; interrupts = <28 29 30 1>; #interrupt-cells = <1>; interrupt-controller; }; apb { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; ranges = <0xb0000000 0xb0000000 0x10000000 0xd0000000 0xd0000000 0x30000000>; serial@b2000000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xb2000000 0x1000>; interrupts = <8>; interrupt-parent = <&shirq>; status = "disabled"; }; serial@b2080000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xb2080000 0x1000>; interrupts = <9>; interrupt-parent = <&shirq>; status = "disabled"; }; serial@b2100000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xb2100000 0x1000>; interrupts = <10>; interrupt-parent = <&shirq>; status = "disabled"; }; serial@b2180000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xb2180000 0x1000>; interrupts = <11>; interrupt-parent = <&shirq>; status = "disabled"; }; serial@b2200000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xb2200000 0x1000>; interrupts = <12>; interrupt-parent = <&shirq>; status = "disabled"; }; gpiopinctrl: gpio@b4000000 { compatible = "st,spear-plgpio"; reg = <0xb4000000 0x1000>; #interrupt-cells = <1>; interrupt-controller; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&pinmux 0 0 102>; status = "disabled"; st-plgpio,ngpio = <102>; st-plgpio,enb-reg = <0x10>; st-plgpio,wdata-reg = <0x20>; st-plgpio,dir-reg = <0x30>; st-plgpio,ie-reg = <0x50>; st-plgpio,rdata-reg = <0x40>; st-plgpio,mis-reg = <0x60>; }; }; }; };