/* * R-Car Generation 2 da9063/da9210 regulator quirk * * The r8a7790/lager and r8a7791/koelsch development boards have da9063 and * da9210 regulators. Both regulators have their interrupt request lines tied * to the same interrupt pin (IRQ2) on the SoC. * * After cold boot or da9063-induced restart, both the da9063 and da9210 seem * to assert their interrupt request lines. Hence as soon as one driver * requests this irq, it gets stuck in an interrupt storm, as it only manages * to deassert its own interrupt request line, and the other driver hasn't * installed an interrupt handler yet. * * To handle this, install a quirk that masks the interrupts in both the * da9063 and da9210. This quirk has to run after the i2c master driver has * been initialized, but before the i2c slave drivers are initialized. * * Copyright (C) 2015 Glider bvba * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include <linux/device.h> #include <linux/i2c.h> #include <linux/init.h> #include <linux/io.h> #include <linux/notifier.h> #include <linux/of.h> #include <linux/mfd/da9063/registers.h> #define IRQC_BASE 0xe61c0000 #define IRQC_MONITOR 0x104 /* IRQn Signal Level Monitor Register */ #define REGULATOR_IRQ_MASK BIT(2) /* IRQ2, active low */ static void __iomem *irqc; static const u8 da9063_mask_regs[] = { DA9063_REG_IRQ_MASK_A, DA9063_REG_IRQ_MASK_B, DA9063_REG_IRQ_MASK_C, DA9063_REG_IRQ_MASK_D, }; /* DA9210 System Control and Event Registers */ #define DA9210_REG_MASK_A 0x54 #define DA9210_REG_MASK_B 0x55 static const u8 da9210_mask_regs[] = { DA9210_REG_MASK_A, DA9210_REG_MASK_B, }; static void da9xxx_mask_irqs(struct i2c_client *client, const u8 regs[], unsigned int nregs) { unsigned int i; dev_info(&client->dev, "Masking %s interrupt sources\n", client->name); for (i = 0; i < nregs; i++) { int error = i2c_smbus_write_byte_data(client, regs[i], ~0); if (error) { dev_err(&client->dev, "i2c error %d\n", error); return; } } } static int regulator_quirk_notify(struct notifier_block *nb, unsigned long action, void *data) { struct device *dev = data; struct i2c_client *client; u32 mon; mon = ioread32(irqc + IRQC_MONITOR); dev_dbg(dev, "%s: %ld, IRQC_MONITOR = 0x%x\n", __func__, action, mon); if (mon & REGULATOR_IRQ_MASK) goto remove; if (action != BUS_NOTIFY_ADD_DEVICE || dev->type == &i2c_adapter_type) return 0; client = to_i2c_client(dev); dev_dbg(dev, "Detected %s\n", client->name); if ((client->addr == 0x58 && !strcmp(client->name, "da9063"))) da9xxx_mask_irqs(client, da9063_mask_regs, ARRAY_SIZE(da9063_mask_regs)); else if (client->addr == 0x68 && !strcmp(client->name, "da9210")) da9xxx_mask_irqs(client, da9210_mask_regs, ARRAY_SIZE(da9210_mask_regs)); mon = ioread32(irqc + IRQC_MONITOR); if (mon & REGULATOR_IRQ_MASK) goto remove; return 0; remove: dev_info(dev, "IRQ2 is not asserted, removing quirk\n"); bus_unregister_notifier(&i2c_bus_type, nb); iounmap(irqc); return 0; } static struct notifier_block regulator_quirk_nb = { .notifier_call = regulator_quirk_notify }; static int __init rcar_gen2_regulator_quirk(void) { u32 mon; if (!of_machine_is_compatible("renesas,koelsch") && !of_machine_is_compatible("renesas,lager")) return -ENODEV; irqc = ioremap(IRQC_BASE, PAGE_SIZE); if (!irqc) return -ENOMEM; mon = ioread32(irqc + IRQC_MONITOR); if (mon & REGULATOR_IRQ_MASK) { pr_debug("%s: IRQ2 is not asserted, not installing quirk\n", __func__); iounmap(irqc); return 0; } pr_info("IRQ2 is asserted, installing da9063/da9210 regulator quirk\n"); bus_register_notifier(&i2c_bus_type, ®ulator_quirk_nb); return 0; } arch_initcall(rcar_gen2_regulator_quirk);