/* * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. * * Copyright (C) 2000, 2001 Keith M Wesolowski * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) */ #include <linux/kernel.h> #include <linux/init.h> #include <linux/interrupt.h> #include <linux/pci.h> #include <linux/types.h> #include <asm/ip32/mace.h> #include <asm/ip32/ip32_ints.h> #undef DEBUG_MACE_PCI /* * Handle errors from the bridge. This includes master and target aborts, * various command and address errors, and the interrupt test. This gets * registered on the bridge error irq. It's conceivable that some of these * conditions warrant a panic. Anybody care to say which ones? */ static irqreturn_t macepci_error(int irq, void *dev) { char s; unsigned int flags = mace->pci.error; unsigned int addr = mace->pci.error_addr; if (flags & MACEPCI_ERROR_MEMORY_ADDR) s = 'M'; else if (flags & MACEPCI_ERROR_CONFIG_ADDR) s = 'C'; else s = 'X'; if (flags & MACEPCI_ERROR_MASTER_ABORT) { printk("MACEPCI: Master abort at 0x%08x (%c)\n", addr, s); flags &= ~MACEPCI_ERROR_MASTER_ABORT; } if (flags & MACEPCI_ERROR_TARGET_ABORT) { printk("MACEPCI: Target abort at 0x%08x (%c)\n", addr, s); flags &= ~MACEPCI_ERROR_TARGET_ABORT; } if (flags & MACEPCI_ERROR_DATA_PARITY_ERR) { printk("MACEPCI: Data parity error at 0x%08x (%c)\n", addr, s); flags &= ~MACEPCI_ERROR_DATA_PARITY_ERR; } if (flags & MACEPCI_ERROR_RETRY_ERR) { printk("MACEPCI: Retry error at 0x%08x (%c)\n", addr, s); flags &= ~MACEPCI_ERROR_RETRY_ERR; } if (flags & MACEPCI_ERROR_ILLEGAL_CMD) { printk("MACEPCI: Illegal command at 0x%08x (%c)\n", addr, s); flags &= ~MACEPCI_ERROR_ILLEGAL_CMD; } if (flags & MACEPCI_ERROR_SYSTEM_ERR) { printk("MACEPCI: System error at 0x%08x (%c)\n", addr, s); flags &= ~MACEPCI_ERROR_SYSTEM_ERR; } if (flags & MACEPCI_ERROR_PARITY_ERR) { printk("MACEPCI: Parity error at 0x%08x (%c)\n", addr, s); flags &= ~MACEPCI_ERROR_PARITY_ERR; } if (flags & MACEPCI_ERROR_OVERRUN) { printk("MACEPCI: Overrun error at 0x%08x (%c)\n", addr, s); flags &= ~MACEPCI_ERROR_OVERRUN; } if (flags & MACEPCI_ERROR_SIG_TABORT) { printk("MACEPCI: Signaled target abort (clearing)\n"); flags &= ~MACEPCI_ERROR_SIG_TABORT; } if (flags & MACEPCI_ERROR_INTERRUPT_TEST) { printk("MACEPCI: Interrupt test triggered (clearing)\n"); flags &= ~MACEPCI_ERROR_INTERRUPT_TEST; } mace->pci.error = flags; return IRQ_HANDLED; } extern struct pci_ops mace_pci_ops; #ifdef CONFIG_64BIT static struct resource mace_pci_mem_resource = { .name = "SGI O2 PCI MEM", .start = MACEPCI_HI_MEMORY, .end = 0x2FFFFFFFFUL, .flags = IORESOURCE_MEM, }; static struct resource mace_pci_io_resource = { .name = "SGI O2 PCI IO", .start = 0x00000000UL, .end = 0xffffffffUL, .flags = IORESOURCE_IO, }; #define MACE_PCI_MEM_OFFSET 0x200000000 #else static struct resource mace_pci_mem_resource = { .name = "SGI O2 PCI MEM", .start = MACEPCI_LOW_MEMORY, .end = MACEPCI_LOW_MEMORY + 0x2000000 - 1, .flags = IORESOURCE_MEM, }; static struct resource mace_pci_io_resource = { .name = "SGI O2 PCI IO", .start = 0x00000000, .end = 0xFFFFFFFF, .flags = IORESOURCE_IO, }; #define MACE_PCI_MEM_OFFSET (MACEPCI_LOW_MEMORY - 0x80000000) #endif static struct pci_controller mace_pci_controller = { .pci_ops = &mace_pci_ops, .mem_resource = &mace_pci_mem_resource, .io_resource = &mace_pci_io_resource, .iommu = 0, .mem_offset = MACE_PCI_MEM_OFFSET, .io_offset = 0, .io_map_base = CKSEG1ADDR(MACEPCI_LOW_IO), }; static int __init mace_init(void) { PCIBIOS_MIN_IO = 0x1000; /* Clear any outstanding errors and enable interrupts */ mace->pci.error_addr = 0; mace->pci.error = 0; mace->pci.control = 0xff008500; printk("MACE PCI rev %d\n", mace->pci.rev); BUG_ON(request_irq(MACE_PCI_BRIDGE_IRQ, macepci_error, 0, "MACE PCI error", NULL)); /* extend memory resources */ iomem_resource.end = mace_pci_mem_resource.end; ioport_resource = mace_pci_io_resource; register_pci_controller(&mace_pci_controller); return 0; } arch_initcall(mace_init);