/* * Copyright (C) 2012 Texas Instruments * Author: Rob Clark <robdclark@gmail.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published by * the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * You should have received a copy of the GNU General Public License along with * this program. If not, see <http://www.gnu.org/licenses/>. */ #ifndef __TILCDC_DRV_H__ #define __TILCDC_DRV_H__ #include <linux/clk.h> #include <linux/cpufreq.h> #include <linux/module.h> #include <linux/platform_device.h> #include <linux/pm.h> #include <linux/pm_runtime.h> #include <linux/slab.h> #include <linux/of.h> #include <linux/of_device.h> #include <linux/list.h> #include <drm/drmP.h> #include <drm/drm_crtc_helper.h> #include <drm/drm_gem_cma_helper.h> #include <drm/drm_fb_cma_helper.h> /* Defaulting to pixel clock defined on AM335x */ #define TILCDC_DEFAULT_MAX_PIXELCLOCK 126000 /* Defaulting to max width as defined on AM335x */ #define TILCDC_DEFAULT_MAX_WIDTH 2048 /* * This may need some tweaking, but want to allow at least 1280x1024@60 * with optimized DDR & EMIF settings tweaked 1920x1080@24 appears to * be supportable */ #define TILCDC_DEFAULT_MAX_BANDWIDTH (1280*1024*60) struct tilcdc_drm_private { void __iomem *mmio; struct clk *disp_clk; /* display dpll */ struct clk *clk; /* functional clock */ int rev; /* IP revision */ /* don't attempt resolutions w/ higher W * H * Hz: */ uint32_t max_bandwidth; /* * Pixel Clock will be restricted to some value as * defined in the device datasheet measured in KHz */ uint32_t max_pixelclock; /* * Max allowable width is limited on a per device basis * measured in pixels */ uint32_t max_width; /* register contents saved across suspend/resume: */ u32 saved_register[12]; #ifdef CONFIG_CPU_FREQ struct notifier_block freq_transition; unsigned int lcd_fck_rate; #endif struct workqueue_struct *wq; struct drm_fbdev_cma *fbdev; struct drm_crtc *crtc; unsigned int num_encoders; struct drm_encoder *encoders[8]; unsigned int num_connectors; struct drm_connector *connectors[8]; }; /* Sub-module for display. Since we don't know at compile time what panels * or display adapter(s) might be present (for ex, off chip dvi/tfp410, * hdmi encoder, various lcd panels), the connector/encoder(s) are split into * separate drivers. If they are probed and found to be present, they * register themselves with tilcdc_register_module(). */ struct tilcdc_module; struct tilcdc_module_ops { /* create appropriate encoders/connectors: */ int (*modeset_init)(struct tilcdc_module *mod, struct drm_device *dev); #ifdef CONFIG_DEBUG_FS /* create debugfs nodes (can be NULL): */ int (*debugfs_init)(struct tilcdc_module *mod, struct drm_minor *minor); /* cleanup debugfs nodes (can be NULL): */ void (*debugfs_cleanup)(struct tilcdc_module *mod, struct drm_minor *minor); #endif }; struct tilcdc_module { const char *name; struct list_head list; const struct tilcdc_module_ops *funcs; unsigned int preferred_bpp; }; void tilcdc_module_init(struct tilcdc_module *mod, const char *name, const struct tilcdc_module_ops *funcs); void tilcdc_module_cleanup(struct tilcdc_module *mod); void tilcdc_slave_probedefer(bool defered); /* Panel config that needs to be set in the crtc, but is not coming from * the mode timings. The display module is expected to call * tilcdc_crtc_set_panel_info() to set this during modeset. */ struct tilcdc_panel_info { /* AC Bias Pin Frequency */ uint32_t ac_bias; /* AC Bias Pin Transitions per Interrupt */ uint32_t ac_bias_intrpt; /* DMA burst size */ uint32_t dma_burst_sz; /* Bits per pixel */ uint32_t bpp; /* FIFO DMA Request Delay */ uint32_t fdd; /* TFT Alternative Signal Mapping (Only for active) */ bool tft_alt_mode; /* Invert pixel clock */ bool invert_pxl_clk; /* Horizontal and Vertical Sync Edge: 0=rising 1=falling */ uint32_t sync_edge; /* Horizontal and Vertical Sync: Control: 0=ignore */ uint32_t sync_ctrl; /* Raster Data Order Select: 1=Most-to-least 0=Least-to-most */ uint32_t raster_order; /* DMA FIFO threshold */ uint32_t fifo_th; }; #define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__) struct drm_crtc *tilcdc_crtc_create(struct drm_device *dev); void tilcdc_crtc_cancel_page_flip(struct drm_crtc *crtc, struct drm_file *file); irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc); void tilcdc_crtc_update_clk(struct drm_crtc *crtc); void tilcdc_crtc_set_panel_info(struct drm_crtc *crtc, const struct tilcdc_panel_info *info); int tilcdc_crtc_mode_valid(struct drm_crtc *crtc, struct drm_display_mode *mode); int tilcdc_crtc_max_width(struct drm_crtc *crtc); #endif /* __TILCDC_DRV_H__ */