/*
* Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
* Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include <linux/sched.h>
#include <rdma/ib_smi.h>
#include "ipath_verbs.h"
#include "ipath_kernel.h"
/**
* ipath_ud_loopback - handle send on loopback QPs
* @sqp: the sending QP
* @swqe: the send work request
*
* This is called from ipath_make_ud_req() to forward a WQE addressed
* to the same HCA.
* Note that the receive interrupt handler may be calling ipath_ud_rcv()
* while this is being called.
*/
static void ipath_ud_loopback(struct ipath_qp *sqp, struct ipath_swqe *swqe)
{
struct ipath_ibdev *dev = to_idev(sqp->ibqp.device);
struct ipath_qp *qp;
struct ib_ah_attr *ah_attr;
unsigned long flags;
struct ipath_rq *rq;
struct ipath_srq *srq;
struct ipath_sge_state rsge;
struct ipath_sge *sge;
struct ipath_rwq *wq;
struct ipath_rwqe *wqe;
void (*handler)(struct ib_event *, void *);
struct ib_wc wc;
u32 tail;
u32 rlen;
u32 length;
qp = ipath_lookup_qpn(&dev->qp_table, swqe->wr.wr.ud.remote_qpn);
if (!qp || !(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK)) {
dev->n_pkt_drops++;
goto done;
}
/*
* Check that the qkey matches (except for QP0, see 9.6.1.4.1).
* Qkeys with the high order bit set mean use the
* qkey from the QP context instead of the WR (see 10.2.5).
*/
if (unlikely(qp->ibqp.qp_num &&
((int) swqe->wr.wr.ud.remote_qkey < 0 ?
sqp->qkey : swqe->wr.wr.ud.remote_qkey) != qp->qkey)) {
/* XXX OK to lose a count once in a while. */
dev->qkey_violations++;
dev->n_pkt_drops++;
goto drop;
}
/*
* A GRH is expected to precede the data even if not
* present on the wire.
*/
length = swqe->length;
memset(&wc, 0, sizeof wc);
wc.byte_len = length + sizeof(struct ib_grh);
if (swqe->wr.opcode == IB_WR_SEND_WITH_IMM) {
wc.wc_flags = IB_WC_WITH_IMM;
wc.ex.imm_data = swqe->wr.ex.imm_data;
}
/*
* This would be a lot simpler if we could call ipath_get_rwqe()
* but that uses state that the receive interrupt handler uses
* so we would need to lock out receive interrupts while doing
* local loopback.
*/
if (qp->ibqp.srq) {
srq = to_isrq(qp->ibqp.srq);
handler = srq->ibsrq.event_handler;
rq = &srq->rq;
} else {
srq = NULL;
handler = NULL;
rq = &qp->r_rq;
}
/*
* Get the next work request entry to find where to put the data.
* Note that it is safe to drop the lock after changing rq->tail
* since ipath_post_receive() won't fill the empty slot.
*/
spin_lock_irqsave(&rq->lock, flags);
wq = rq->wq;
tail = wq->tail;
/* Validate tail before using it since it is user writable. */
if (tail >= rq->size)
tail = 0;
if (unlikely(tail == wq->head)) {
spin_unlock_irqrestore(&rq->lock, flags);
dev->n_pkt_drops++;
goto drop;
}
wqe = get_rwqe_ptr(rq, tail);
rsge.sg_list = qp->r_ud_sg_list;
if (!ipath_init_sge(qp, wqe, &rlen, &rsge)) {
spin_unlock_irqrestore(&rq->lock, flags);
dev->n_pkt_drops++;
goto drop;
}
/* Silently drop packets which are too big. */
if (wc.byte_len > rlen) {
spin_unlock_irqrestore(&rq->lock, flags);
dev->n_pkt_drops++;
goto drop;
}
if (++tail >= rq->size)
tail = 0;
wq->tail = tail;
wc.wr_id = wqe->wr_id;
if (handler) {
u32 n;
/*
* validate head pointer value and compute
* the number of remaining WQEs.
*/
n = wq->head;
if (n >= rq->size)
n = 0;
if (n < tail)
n += rq->size - tail;
else
n -= tail;
if (n < srq->limit) {
struct ib_event ev;
srq->limit = 0;
spin_unlock_irqrestore(&rq->lock, flags);
ev.device = qp->ibqp.device;
ev.element.srq = qp->ibqp.srq;
ev.event = IB_EVENT_SRQ_LIMIT_REACHED;
handler(&ev, srq->ibsrq.srq_context);
} else
spin_unlock_irqrestore(&rq->lock, flags);
} else
spin_unlock_irqrestore(&rq->lock, flags);
ah_attr = &to_iah(swqe->wr.wr.ud.ah)->attr;
if (ah_attr->ah_flags & IB_AH_GRH) {
ipath_copy_sge(&rsge, &ah_attr->grh, sizeof(struct ib_grh));
wc.wc_flags |= IB_WC_GRH;
} else
ipath_skip_sge(&rsge, sizeof(struct ib_grh));
sge = swqe->sg_list;
while (length) {
u32 len = sge->length;
if (len > length)
len = length;
if (len > sge->sge_length)
len = sge->sge_length;
BUG_ON(len == 0);
ipath_copy_sge(&rsge, sge->vaddr, len);
sge->vaddr += len;
sge->length -= len;
sge->sge_length -= len;
if (sge->sge_length == 0) {
if (--swqe->wr.num_sge)
sge++;
} else if (sge->length == 0 && sge->mr != NULL) {
if (++sge->n >= IPATH_SEGSZ) {
if (++sge->m >= sge->mr->mapsz)
break;
sge->n = 0;
}
sge->vaddr =
sge->mr->map[sge->m]->segs[sge->n].vaddr;
sge->length =
sge->mr->map[sge->m]->segs[sge->n].length;
}
length -= len;
}
wc.status = IB_WC_SUCCESS;
wc.opcode = IB_WC_RECV;
wc.qp = &qp->ibqp;
wc.src_qp = sqp->ibqp.qp_num;
/* XXX do we know which pkey matched? Only needed for GSI. */
wc.pkey_index = 0;
wc.slid = dev->dd->ipath_lid |
(ah_attr->src_path_bits &
((1 << dev->dd->ipath_lmc) - 1));
wc.sl = ah_attr->sl;
wc.dlid_path_bits =
ah_attr->dlid & ((1 << dev->dd->ipath_lmc) - 1);
wc.port_num = 1;
/* Signal completion event if the solicited bit is set. */
ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc,
swqe->wr.send_flags & IB_SEND_SOLICITED);
drop:
if (atomic_dec_and_test(&qp->refcount))
wake_up(&qp->wait);
done:;
}
/**
* ipath_make_ud_req - construct a UD request packet
* @qp: the QP
*
* Return 1 if constructed; otherwise, return 0.
*/
int ipath_make_ud_req(struct ipath_qp *qp)
{
struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
struct ipath_other_headers *ohdr;
struct ib_ah_attr *ah_attr;
struct ipath_swqe *wqe;
unsigned long flags;
u32 nwords;
u32 extra_bytes;
u32 bth0;
u16 lrh0;
u16 lid;
int ret = 0;
int next_cur;
spin_lock_irqsave(&qp->s_lock, flags);
if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_NEXT_SEND_OK)) {
if (!(ib_ipath_state_ops[qp->state] & IPATH_FLUSH_SEND))
goto bail;
/* We are in the error state, flush the work request. */
if (qp->s_last == qp->s_head)
goto bail;
/* If DMAs are in progress, we can't flush immediately. */
if (atomic_read(&qp->s_dma_busy)) {
qp->s_flags |= IPATH_S_WAIT_DMA;
goto bail;
}
wqe = get_swqe_ptr(qp, qp->s_last);
ipath_send_complete(qp, wqe, IB_WC_WR_FLUSH_ERR);
goto done;
}
if (qp->s_cur == qp->s_head)
goto bail;
wqe = get_swqe_ptr(qp, qp->s_cur);
next_cur = qp->s_cur + 1;
if (next_cur >= qp->s_size)
next_cur = 0;
/* Construct the header. */
ah_attr = &to_iah(wqe->wr.wr.ud.ah)->attr;
if (ah_attr->dlid >= IPATH_MULTICAST_LID_BASE) {
if (ah_attr->dlid != IPATH_PERMISSIVE_LID)
dev->n_multicast_xmit++;
else
dev->n_unicast_xmit++;
} else {
dev->n_unicast_xmit++;
lid = ah_attr->dlid & ~((1 << dev->dd->ipath_lmc) - 1);
if (unlikely(lid == dev->dd->ipath_lid)) {
/*
* If DMAs are in progress, we can't generate
* a completion for the loopback packet since
* it would be out of order.
* XXX Instead of waiting, we could queue a
* zero length descriptor so we get a callback.
*/
if (atomic_read(&qp->s_dma_busy)) {
qp->s_flags |= IPATH_S_WAIT_DMA;
goto bail;
}
qp->s_cur = next_cur;
spin_unlock_irqrestore(&qp->s_lock, flags);
ipath_ud_loopback(qp, wqe);
spin_lock_irqsave(&qp->s_lock, flags);
ipath_send_complete(qp, wqe, IB_WC_SUCCESS);
goto done;
}
}
qp->s_cur = next_cur;
extra_bytes = -wqe->length & 3;
nwords = (wqe->length + extra_bytes) >> 2;
/* header size in 32-bit words LRH+BTH+DETH = (8+12+8)/4. */
qp->s_hdrwords = 7;
qp->s_cur_size = wqe->length;
qp->s_cur_sge = &qp->s_sge;
qp->s_dmult = ah_attr->static_rate;
qp->s_wqe = wqe;
qp->s_sge.sge = wqe->sg_list[0];
qp->s_sge.sg_list = wqe->sg_list + 1;
qp->s_sge.num_sge = wqe->wr.num_sge;
if (ah_attr->ah_flags & IB_AH_GRH) {
/* Header size in 32-bit words. */
qp->s_hdrwords += ipath_make_grh(dev, &qp->s_hdr.u.l.grh,
&ah_attr->grh,
qp->s_hdrwords, nwords);
lrh0 = IPATH_LRH_GRH;
ohdr = &qp->s_hdr.u.l.oth;
/*
* Don't worry about sending to locally attached multicast
* QPs. It is unspecified by the spec. what happens.
*/
} else {
/* Header size in 32-bit words. */
lrh0 = IPATH_LRH_BTH;
ohdr = &qp->s_hdr.u.oth;
}
if (wqe->wr.opcode == IB_WR_SEND_WITH_IMM) {
qp->s_hdrwords++;
ohdr->u.ud.imm_data = wqe->wr.ex.imm_data;
bth0 = IB_OPCODE_UD_SEND_ONLY_WITH_IMMEDIATE << 24;
} else
bth0 = IB_OPCODE_UD_SEND_ONLY << 24;
lrh0 |= ah_attr->sl << 4;
if (qp->ibqp.qp_type == IB_QPT_SMI)
lrh0 |= 0xF000; /* Set VL (see ch. 13.5.3.1) */
qp->s_hdr.lrh[0] = cpu_to_be16(lrh0);
qp->s_hdr.lrh[1] = cpu_to_be16(ah_attr->dlid); /* DEST LID */
qp->s_hdr.lrh[2] = cpu_to_be16(qp->s_hdrwords + nwords +
SIZE_OF_CRC);
lid = dev->dd->ipath_lid;
if (lid) {
lid |= ah_attr->src_path_bits &
((1 << dev->dd->ipath_lmc) - 1);
qp->s_hdr.lrh[3] = cpu_to_be16(lid);
} else
qp->s_hdr.lrh[3] = IB_LID_PERMISSIVE;
if (wqe->wr.send_flags & IB_SEND_SOLICITED)
bth0 |= 1 << 23;
bth0 |= extra_bytes << 20;
bth0 |= qp->ibqp.qp_type == IB_QPT_SMI ? IPATH_DEFAULT_P_KEY :
ipath_get_pkey(dev->dd, qp->s_pkey_index);
ohdr->bth[0] = cpu_to_be32(bth0);
/*
* Use the multicast QP if the destination LID is a multicast LID.
*/
ohdr->bth[1] = ah_attr->dlid >= IPATH_MULTICAST_LID_BASE &&
ah_attr->dlid != IPATH_PERMISSIVE_LID ?
cpu_to_be32(IPATH_MULTICAST_QPN) :
cpu_to_be32(wqe->wr.wr.ud.remote_qpn);
ohdr->bth[2] = cpu_to_be32(qp->s_next_psn++ & IPATH_PSN_MASK);
/*
* Qkeys with the high order bit set mean use the
* qkey from the QP context instead of the WR (see 10.2.5).
*/
ohdr->u.ud.deth[0] = cpu_to_be32((int)wqe->wr.wr.ud.remote_qkey < 0 ?
qp->qkey : wqe->wr.wr.ud.remote_qkey);
ohdr->u.ud.deth[1] = cpu_to_be32(qp->ibqp.qp_num);
done:
ret = 1;
goto unlock;
bail:
qp->s_flags &= ~IPATH_S_BUSY;
unlock:
spin_unlock_irqrestore(&qp->s_lock, flags);
return ret;
}
/**
* ipath_ud_rcv - receive an incoming UD packet
* @dev: the device the packet came in on
* @hdr: the packet header
* @has_grh: true if the packet has a GRH
* @data: the packet data
* @tlen: the packet length
* @qp: the QP the packet came on
*
* This is called from ipath_qp_rcv() to process an incoming UD packet
* for the given QP.
* Called at interrupt level.
*/
void ipath_ud_rcv(struct ipath_ibdev *dev, struct ipath_ib_header *hdr,
int has_grh, void *data, u32 tlen, struct ipath_qp *qp)
{
struct ipath_other_headers *ohdr;
int opcode;
u32 hdrsize;
u32 pad;
struct ib_wc wc;
u32 qkey;
u32 src_qp;
u16 dlid;
int header_in_data;
/* Check for GRH */
if (!has_grh) {
ohdr = &hdr->u.oth;
hdrsize = 8 + 12 + 8; /* LRH + BTH + DETH */
qkey = be32_to_cpu(ohdr->u.ud.deth[0]);
src_qp = be32_to_cpu(ohdr->u.ud.deth[1]);
header_in_data = 0;
} else {
ohdr = &hdr->u.l.oth;
hdrsize = 8 + 40 + 12 + 8; /* LRH + GRH + BTH + DETH */
/*
* The header with GRH is 68 bytes and the core driver sets
* the eager header buffer size to 56 bytes so the last 12
* bytes of the IB header is in the data buffer.
*/
header_in_data = dev->dd->ipath_rcvhdrentsize == 16;
if (header_in_data) {
qkey = be32_to_cpu(((__be32 *) data)[1]);
src_qp = be32_to_cpu(((__be32 *) data)[2]);
data += 12;
} else {
qkey = be32_to_cpu(ohdr->u.ud.deth[0]);
src_qp = be32_to_cpu(ohdr->u.ud.deth[1]);
}
}
src_qp &= IPATH_QPN_MASK;
/*
* Check that the permissive LID is only used on QP0
* and the QKEY matches (see 9.6.1.4.1 and 9.6.1.5.1).
*/
if (qp->ibqp.qp_num) {
if (unlikely(hdr->lrh[1] == IB_LID_PERMISSIVE ||
hdr->lrh[3] == IB_LID_PERMISSIVE)) {
dev->n_pkt_drops++;
goto bail;
}
if (unlikely(qkey != qp->qkey)) {
/* XXX OK to lose a count once in a while. */
dev->qkey_violations++;
dev->n_pkt_drops++;
goto bail;
}
} else if (hdr->lrh[1] == IB_LID_PERMISSIVE ||
hdr->lrh[3] == IB_LID_PERMISSIVE) {
struct ib_smp *smp = (struct ib_smp *) data;
if (smp->mgmt_class != IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE) {
dev->n_pkt_drops++;
goto bail;
}
}
/*
* The opcode is in the low byte when its in network order
* (top byte when in host order).
*/
opcode = be32_to_cpu(ohdr->bth[0]) >> 24;
if (qp->ibqp.qp_num > 1 &&
opcode == IB_OPCODE_UD_SEND_ONLY_WITH_IMMEDIATE) {
if (header_in_data) {
wc.ex.imm_data = *(__be32 *) data;
data += sizeof(__be32);
} else
wc.ex.imm_data = ohdr->u.ud.imm_data;
wc.wc_flags = IB_WC_WITH_IMM;
hdrsize += sizeof(u32);
} else if (opcode == IB_OPCODE_UD_SEND_ONLY) {
wc.ex.imm_data = 0;
wc.wc_flags = 0;
} else {
dev->n_pkt_drops++;
goto bail;
}
/* Get the number of bytes the message was padded by. */
pad = (be32_to_cpu(ohdr->bth[0]) >> 20) & 3;
if (unlikely(tlen < (hdrsize + pad + 4))) {
/* Drop incomplete packets. */
dev->n_pkt_drops++;
goto bail;
}
tlen -= hdrsize + pad + 4;
/* Drop invalid MAD packets (see 13.5.3.1). */
if (unlikely((qp->ibqp.qp_num == 0 &&
(tlen != 256 ||
(be16_to_cpu(hdr->lrh[0]) >> 12) != 15)) ||
(qp->ibqp.qp_num == 1 &&
(tlen != 256 ||
(be16_to_cpu(hdr->lrh[0]) >> 12) == 15)))) {
dev->n_pkt_drops++;
goto bail;
}
/*
* A GRH is expected to precede the data even if not
* present on the wire.
*/
wc.byte_len = tlen + sizeof(struct ib_grh);
/*
* Get the next work request entry to find where to put the data.
*/
if (qp->r_flags & IPATH_R_REUSE_SGE)
qp->r_flags &= ~IPATH_R_REUSE_SGE;
else if (!ipath_get_rwqe(qp, 0)) {
/*
* Count VL15 packets dropped due to no receive buffer.
* Otherwise, count them as buffer overruns since usually,
* the HW will be able to receive packets even if there are
* no QPs with posted receive buffers.
*/
if (qp->ibqp.qp_num == 0)
dev->n_vl15_dropped++;
else
dev->rcv_errors++;
goto bail;
}
/* Silently drop packets which are too big. */
if (wc.byte_len > qp->r_len) {
qp->r_flags |= IPATH_R_REUSE_SGE;
dev->n_pkt_drops++;
goto bail;
}
if (has_grh) {
ipath_copy_sge(&qp->r_sge, &hdr->u.l.grh,
sizeof(struct ib_grh));
wc.wc_flags |= IB_WC_GRH;
} else
ipath_skip_sge(&qp->r_sge, sizeof(struct ib_grh));
ipath_copy_sge(&qp->r_sge, data,
wc.byte_len - sizeof(struct ib_grh));
if (!test_and_clear_bit(IPATH_R_WRID_VALID, &qp->r_aflags))
goto bail;
wc.wr_id = qp->r_wr_id;
wc.status = IB_WC_SUCCESS;
wc.opcode = IB_WC_RECV;
wc.vendor_err = 0;
wc.qp = &qp->ibqp;
wc.src_qp = src_qp;
/* XXX do we know which pkey matched? Only needed for GSI. */
wc.pkey_index = 0;
wc.slid = be16_to_cpu(hdr->lrh[3]);
wc.sl = (be16_to_cpu(hdr->lrh[0]) >> 4) & 0xF;
dlid = be16_to_cpu(hdr->lrh[1]);
/*
* Save the LMC lower bits if the destination LID is a unicast LID.
*/
wc.dlid_path_bits = dlid >= IPATH_MULTICAST_LID_BASE ? 0 :
dlid & ((1 << dev->dd->ipath_lmc) - 1);
wc.port_num = 1;
/* Signal completion event if the solicited bit is set. */
ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc,
(ohdr->bth[0] &
cpu_to_be32(1 << 23)) != 0);
bail:;
}