/* * drivers/net/phy/national.c * * Driver for National Semiconductor PHYs * * Author: Stuart Menefy <stuart.menefy@st.com> * Maintainer: Giuseppe Cavallaro <peppe.cavallaro@st.com> * * Copyright (c) 2008 STMicroelectronics Limited * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include <linux/kernel.h> #include <linux/module.h> #include <linux/mii.h> #include <linux/ethtool.h> #include <linux/phy.h> #include <linux/netdevice.h> #define DEBUG /* DP83865 phy identifier values */ #define DP83865_PHY_ID 0x20005c7a #define DP83865_INT_STATUS 0x14 #define DP83865_INT_MASK 0x15 #define DP83865_INT_CLEAR 0x17 #define DP83865_INT_REMOTE_FAULT 0x0008 #define DP83865_INT_ANE_COMPLETED 0x0010 #define DP83865_INT_LINK_CHANGE 0xe000 #define DP83865_INT_MASK_DEFAULT (DP83865_INT_REMOTE_FAULT | \ DP83865_INT_ANE_COMPLETED | \ DP83865_INT_LINK_CHANGE) /* Advanced proprietary configuration */ #define NS_EXP_MEM_CTL 0x16 #define NS_EXP_MEM_DATA 0x1d #define NS_EXP_MEM_ADD 0x1e #define LED_CTRL_REG 0x13 #define AN_FALLBACK_AN 0x0001 #define AN_FALLBACK_CRC 0x0002 #define AN_FALLBACK_IE 0x0004 #define ALL_FALLBACK_ON (AN_FALLBACK_AN | AN_FALLBACK_CRC | AN_FALLBACK_IE) enum hdx_loopback { hdx_loopback_on = 0, hdx_loopback_off = 1, }; static u8 ns_exp_read(struct phy_device *phydev, u16 reg) { phy_write(phydev, NS_EXP_MEM_ADD, reg); return phy_read(phydev, NS_EXP_MEM_DATA); } static void ns_exp_write(struct phy_device *phydev, u16 reg, u8 data) { phy_write(phydev, NS_EXP_MEM_ADD, reg); phy_write(phydev, NS_EXP_MEM_DATA, data); } static int ns_config_intr(struct phy_device *phydev) { int err; if (phydev->interrupts == PHY_INTERRUPT_ENABLED) err = phy_write(phydev, DP83865_INT_MASK, DP83865_INT_MASK_DEFAULT); else err = phy_write(phydev, DP83865_INT_MASK, 0); return err; } static int ns_ack_interrupt(struct phy_device *phydev) { int ret = phy_read(phydev, DP83865_INT_STATUS); if (ret < 0) return ret; /* Clear the interrupt status bit by writing a “1” * to the corresponding bit in INT_CLEAR (2:0 are reserved) */ ret = phy_write(phydev, DP83865_INT_CLEAR, ret & ~0x7); return ret; } static void ns_giga_speed_fallback(struct phy_device *phydev, int mode) { int bmcr = phy_read(phydev, MII_BMCR); phy_write(phydev, MII_BMCR, (bmcr | BMCR_PDOWN)); /* Enable 8 bit expended memory read/write (no auto increment) */ phy_write(phydev, NS_EXP_MEM_CTL, 0); phy_write(phydev, NS_EXP_MEM_ADD, 0x1C0); phy_write(phydev, NS_EXP_MEM_DATA, 0x0008); phy_write(phydev, MII_BMCR, (bmcr & ~BMCR_PDOWN)); phy_write(phydev, LED_CTRL_REG, mode); } static void ns_10_base_t_hdx_loopack(struct phy_device *phydev, int disable) { if (disable) ns_exp_write(phydev, 0x1c0, ns_exp_read(phydev, 0x1c0) | 1); else ns_exp_write(phydev, 0x1c0, ns_exp_read(phydev, 0x1c0) & 0xfffe); pr_debug("10BASE-T HDX loopback %s\n", (ns_exp_read(phydev, 0x1c0) & 0x0001) ? "off" : "on"); } static int ns_config_init(struct phy_device *phydev) { ns_giga_speed_fallback(phydev, ALL_FALLBACK_ON); /* In the latest MAC or switches design, the 10 Mbps loopback is desired to be turned off. */ ns_10_base_t_hdx_loopack(phydev, hdx_loopback_off); return ns_ack_interrupt(phydev); } static struct phy_driver dp83865_driver[] = { { .phy_id = DP83865_PHY_ID, .phy_id_mask = 0xfffffff0, .name = "NatSemi DP83865", .features = PHY_GBIT_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause, .flags = PHY_HAS_INTERRUPT, .config_init = ns_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, .ack_interrupt = ns_ack_interrupt, .config_intr = ns_config_intr, .driver = {.owner = THIS_MODULE,} } }; module_phy_driver(dp83865_driver); MODULE_DESCRIPTION("NatSemi PHY driver"); MODULE_AUTHOR("Stuart Menefy"); MODULE_LICENSE("GPL"); static struct mdio_device_id __maybe_unused ns_tbl[] = { { DP83865_PHY_ID, 0xfffffff0 }, { } }; MODULE_DEVICE_TABLE(mdio, ns_tbl);