- 根目录:
- drivers
- gpu
- drm
- i915
- i915_gem_context.c
/*
* Copyright © 2011-2012 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*
* Authors:
* Ben Widawsky <ben@bwidawsk.net>
*
*/
/*
* This file implements HW context support. On gen5+ a HW context consists of an
* opaque GPU object which is referenced at times of context saves and restores.
* With RC6 enabled, the context is also referenced as the GPU enters and exists
* from RC6 (GPU has it's own internal power context, except on gen5). Though
* something like a context does exist for the media ring, the code only
* supports contexts for the render ring.
*
* In software, there is a distinction between contexts created by the user,
* and the default HW context. The default HW context is used by GPU clients
* that do not request setup of their own hardware context. The default
* context's state is never restored to help prevent programming errors. This
* would happen if a client ran and piggy-backed off another clients GPU state.
* The default context only exists to give the GPU some offset to load as the
* current to invoke a save of the context we actually care about. In fact, the
* code could likely be constructed, albeit in a more complicated fashion, to
* never use the default context, though that limits the driver's ability to
* swap out, and/or destroy other contexts.
*
* All other contexts are created as a request by the GPU client. These contexts
* store GPU state, and thus allow GPU clients to not re-emit state (and
* potentially query certain state) at any time. The kernel driver makes
* certain that the appropriate commands are inserted.
*
* The context life cycle is semi-complicated in that context BOs may live
* longer than the context itself because of the way the hardware, and object
* tracking works. Below is a very crude representation of the state machine
* describing the context life.
* refcount pincount active
* S0: initial state 0 0 0
* S1: context created 1 0 0
* S2: context is currently running 2 1 X
* S3: GPU referenced, but not current 2 0 1
* S4: context is current, but destroyed 1 1 0
* S5: like S3, but destroyed 1 0 1
*
* The most common (but not all) transitions:
* S0->S1: client creates a context
* S1->S2: client submits execbuf with context
* S2->S3: other clients submits execbuf with context
* S3->S1: context object was retired
* S3->S2: clients submits another execbuf
* S2->S4: context destroy called with current context
* S3->S5->S0: destroy path
* S4->S5->S0: destroy path on current context
*
* There are two confusing terms used above:
* The "current context" means the context which is currently running on the
* GPU. The GPU has loaded its state already and has stored away the gtt
* offset of the BO. The GPU is not actively referencing the data at this
* offset, but it will on the next context switch. The only way to avoid this
* is to do a GPU reset.
*
* An "active context' is one which was previously the "current context" and is
* on the active list waiting for the next context switch to occur. Until this
* happens, the object must remain at the same gtt offset. It is therefore
* possible to destroy a context, but it is still active.
*
*/
#include <drm/drmP.h>
#include <drm/i915_drm.h>
#include "i915_drv.h"
#include "i915_trace.h"
/* This is a HW constraint. The value below is the largest known requirement
* I've seen in a spec to date, and that was a workaround for a non-shipping
* part. It should be safe to decrease this, but it's more future proof as is.
*/
#define GEN6_CONTEXT_ALIGN (64<<10)
#define GEN7_CONTEXT_ALIGN 4096
static size_t get_context_alignment(struct drm_device *dev)
{
if (IS_GEN6(dev))
return GEN6_CONTEXT_ALIGN;
return GEN7_CONTEXT_ALIGN;
}
static int get_context_size(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int ret;
u32 reg;
switch (INTEL_INFO(dev)->gen) {
case 6:
reg = I915_READ(CXT_SIZE);
ret = GEN6_CXT_TOTAL_SIZE(reg) * 64;
break;
case 7:
reg = I915_READ(GEN7_CXT_SIZE);
if (IS_HASWELL(dev))
ret = HSW_CXT_TOTAL_SIZE;
else
ret = GEN7_CXT_TOTAL_SIZE(reg) * 64;
break;
case 8:
ret = GEN8_CXT_TOTAL_SIZE;
break;
default:
BUG();
}
return ret;
}
void i915_gem_context_free(struct kref *ctx_ref)
{
struct intel_context *ctx = container_of(ctx_ref,
typeof(*ctx), ref);
trace_i915_context_free(ctx);
if (i915.enable_execlists)
intel_lr_context_free(ctx);
i915_ppgtt_put(ctx->ppgtt);
if (ctx->legacy_hw_ctx.rcs_state)
drm_gem_object_unreference(&ctx->legacy_hw_ctx.rcs_state->base);
list_del(&ctx->link);
kfree(ctx);
}
struct drm_i915_gem_object *
i915_gem_alloc_context_obj(struct drm_device *dev, size_t size)
{
struct drm_i915_gem_object *obj;
int ret;
obj = i915_gem_alloc_object(dev, size);
if (obj == NULL)
return ERR_PTR(-ENOMEM);
/*
* Try to make the context utilize L3 as well as LLC.
*
* On VLV we don't have L3 controls in the PTEs so we
* shouldn't touch the cache level, especially as that
* would make the object snooped which might have a
* negative performance impact.
*/
if (INTEL_INFO(dev)->gen >= 7 && !IS_VALLEYVIEW(dev)) {
ret = i915_gem_object_set_cache_level(obj, I915_CACHE_L3_LLC);
/* Failure shouldn't ever happen this early */
if (WARN_ON(ret)) {
drm_gem_object_unreference(&obj->base);
return ERR_PTR(ret);
}
}
return obj;
}
static struct intel_context *
__create_hw_context(struct drm_device *dev,
struct drm_i915_file_private *file_priv)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_context *ctx;
int ret;
ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
if (ctx == NULL)
return ERR_PTR(-ENOMEM);
kref_init(&ctx->ref);
list_add_tail(&ctx->link, &dev_priv->context_list);
if (dev_priv->hw_context_size) {
struct drm_i915_gem_object *obj =
i915_gem_alloc_context_obj(dev, dev_priv->hw_context_size);
if (IS_ERR(obj)) {
ret = PTR_ERR(obj);
goto err_out;
}
ctx->legacy_hw_ctx.rcs_state = obj;
}
/* Default context will never have a file_priv */
if (file_priv != NULL) {
ret = idr_alloc(&file_priv->context_idr, ctx,
DEFAULT_CONTEXT_HANDLE, 0, GFP_KERNEL);
if (ret < 0)
goto err_out;
} else
ret = DEFAULT_CONTEXT_HANDLE;
ctx->file_priv = file_priv;
ctx->user_handle = ret;
/* NB: Mark all slices as needing a remap so that when the context first
* loads it will restore whatever remap state already exists. If there
* is no remap info, it will be a NOP. */
ctx->remap_slice = (1 << NUM_L3_SLICES(dev)) - 1;
ctx->hang_stats.ban_period_seconds = DRM_I915_CTX_BAN_PERIOD;
return ctx;
err_out:
i915_gem_context_unreference(ctx);
return ERR_PTR(ret);
}
/**
* The default context needs to exist per ring that uses contexts. It stores the
* context state of the GPU for applications that don't utilize HW contexts, as
* well as an idle case.
*/
static struct intel_context *
i915_gem_create_context(struct drm_device *dev,
struct drm_i915_file_private *file_priv)
{
const bool is_global_default_ctx = file_priv == NULL;
struct intel_context *ctx;
int ret = 0;
BUG_ON(!mutex_is_locked(&dev->struct_mutex));
ctx = __create_hw_context(dev, file_priv);
if (IS_ERR(ctx))
return ctx;
if (is_global_default_ctx && ctx->legacy_hw_ctx.rcs_state) {
/* We may need to do things with the shrinker which
* require us to immediately switch back to the default
* context. This can cause a problem as pinning the
* default context also requires GTT space which may not
* be available. To avoid this we always pin the default
* context.
*/
ret = i915_gem_obj_ggtt_pin(ctx->legacy_hw_ctx.rcs_state,
get_context_alignment(dev), 0);
if (ret) {
DRM_DEBUG_DRIVER("Couldn't pin %d\n", ret);
goto err_destroy;
}
}
if (USES_FULL_PPGTT(dev)) {
struct i915_hw_ppgtt *ppgtt = i915_ppgtt_create(dev, file_priv);
if (IS_ERR_OR_NULL(ppgtt)) {
DRM_DEBUG_DRIVER("PPGTT setup failed (%ld)\n",
PTR_ERR(ppgtt));
ret = PTR_ERR(ppgtt);
goto err_unpin;
}
ctx->ppgtt = ppgtt;
}
trace_i915_context_create(ctx);
return ctx;
err_unpin:
if (is_global_default_ctx && ctx->legacy_hw_ctx.rcs_state)
i915_gem_object_ggtt_unpin(ctx->legacy_hw_ctx.rcs_state);
err_destroy:
i915_gem_context_unreference(ctx);
return ERR_PTR(ret);
}
void i915_gem_context_reset(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int i;
if (i915.enable_execlists) {
struct intel_context *ctx;
list_for_each_entry(ctx, &dev_priv->context_list, link) {
intel_lr_context_reset(dev, ctx);
}
return;
}
for (i = 0; i < I915_NUM_RINGS; i++) {
struct intel_engine_cs *ring = &dev_priv->ring[i];
struct intel_context *lctx = ring->last_context;
if (lctx) {
if (lctx->legacy_hw_ctx.rcs_state && i == RCS)
i915_gem_object_ggtt_unpin(lctx->legacy_hw_ctx.rcs_state);
i915_gem_context_unreference(lctx);
ring->last_context = NULL;
}
}
}
int i915_gem_context_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_context *ctx;
int i;
/* Init should only be called once per module load. Eventually the
* restriction on the context_disabled check can be loosened. */
if (WARN_ON(dev_priv->ring[RCS].default_context))
return 0;
if (i915.enable_execlists) {
/* NB: intentionally left blank. We will allocate our own
* backing objects as we need them, thank you very much */
dev_priv->hw_context_size = 0;
} else if (HAS_HW_CONTEXTS(dev)) {
dev_priv->hw_context_size = round_up(get_context_size(dev), 4096);
if (dev_priv->hw_context_size > (1<<20)) {
DRM_DEBUG_DRIVER("Disabling HW Contexts; invalid size %d\n",
dev_priv->hw_context_size);
dev_priv->hw_context_size = 0;
}
}
ctx = i915_gem_create_context(dev, NULL);
if (IS_ERR(ctx)) {
DRM_ERROR("Failed to create default global context (error %ld)\n",
PTR_ERR(ctx));
return PTR_ERR(ctx);
}
for (i = 0; i < I915_NUM_RINGS; i++) {
struct intel_engine_cs *ring = &dev_priv->ring[i];
/* NB: RCS will hold a ref for all rings */
ring->default_context = ctx;
}
DRM_DEBUG_DRIVER("%s context support initialized\n",
i915.enable_execlists ? "LR" :
dev_priv->hw_context_size ? "HW" : "fake");
return 0;
}
void i915_gem_context_fini(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_context *dctx = dev_priv->ring[RCS].default_context;
int i;
if (dctx->legacy_hw_ctx.rcs_state) {
/* The only known way to stop the gpu from accessing the hw context is
* to reset it. Do this as the very last operation to avoid confusing
* other code, leading to spurious errors. */
intel_gpu_reset(dev);
/* When default context is created and switched to, base object refcount
* will be 2 (+1 from object creation and +1 from do_switch()).
* i915_gem_context_fini() will be called after gpu_idle() has switched
* to default context. So we need to unreference the base object once
* to offset the do_switch part, so that i915_gem_context_unreference()
* can then free the base object correctly. */
WARN_ON(!dev_priv->ring[RCS].last_context);
if (dev_priv->ring[RCS].last_context == dctx) {
/* Fake switch to NULL context */
WARN_ON(dctx->legacy_hw_ctx.rcs_state->active);
i915_gem_object_ggtt_unpin(dctx->legacy_hw_ctx.rcs_state);
i915_gem_context_unreference(dctx);
dev_priv->ring[RCS].last_context = NULL;
}
i915_gem_object_ggtt_unpin(dctx->legacy_hw_ctx.rcs_state);
}
for (i = 0; i < I915_NUM_RINGS; i++) {
struct intel_engine_cs *ring = &dev_priv->ring[i];
if (ring->last_context)
i915_gem_context_unreference(ring->last_context);
ring->default_context = NULL;
ring->last_context = NULL;
}
i915_gem_context_unreference(dctx);
}
int i915_gem_context_enable(struct drm_i915_private *dev_priv)
{
struct intel_engine_cs *ring;
int ret, i;
BUG_ON(!dev_priv->ring[RCS].default_context);
if (i915.enable_execlists) {
for_each_ring(ring, dev_priv, i) {
if (ring->init_context) {
ret = ring->init_context(ring,
ring->default_context);
if (ret) {
DRM_ERROR("ring init context: %d\n",
ret);
return ret;
}
}
}
} else
for_each_ring(ring, dev_priv, i) {
ret = i915_switch_context(ring, ring->default_context);
if (ret)
return ret;
}
return 0;
}
static int context_idr_cleanup(int id, void *p, void *data)
{
struct intel_context *ctx = p;
i915_gem_context_unreference(ctx);
return 0;
}
int i915_gem_context_open(struct drm_device *dev, struct drm_file *file)
{
struct drm_i915_file_private *file_priv = file->driver_priv;
struct intel_context *ctx;
idr_init(&file_priv->context_idr);
mutex_lock(&dev->struct_mutex);
ctx = i915_gem_create_context(dev, file_priv);
mutex_unlock(&dev->struct_mutex);
if (IS_ERR(ctx)) {
idr_destroy(&file_priv->context_idr);
return PTR_ERR(ctx);
}
return 0;
}
void i915_gem_context_close(struct drm_device *dev, struct drm_file *file)
{
struct drm_i915_file_private *file_priv = file->driver_priv;
idr_for_each(&file_priv->context_idr, context_idr_cleanup, NULL);
idr_destroy(&file_priv->context_idr);
}
struct intel_context *
i915_gem_context_get(struct drm_i915_file_private *file_priv, u32 id)
{
struct intel_context *ctx;
ctx = (struct intel_context *)idr_find(&file_priv->context_idr, id);
if (!ctx)
return ERR_PTR(-ENOENT);
return ctx;
}
static inline int
mi_set_context(struct intel_engine_cs *ring,
struct intel_context *new_context,
u32 hw_flags)
{
u32 flags = hw_flags | MI_MM_SPACE_GTT;
const int num_rings =
/* Use an extended w/a on ivb+ if signalling from other rings */
i915_semaphore_is_enabled(ring->dev) ?
hweight32(INTEL_INFO(ring->dev)->ring_mask) - 1 :
0;
int len, i, ret;
/* w/a: If Flush TLB Invalidation Mode is enabled, driver must do a TLB
* invalidation prior to MI_SET_CONTEXT. On GEN6 we don't set the value
* explicitly, so we rely on the value at ring init, stored in
* itlb_before_ctx_switch.
*/
if (IS_GEN6(ring->dev)) {
ret = ring->flush(ring, I915_GEM_GPU_DOMAINS, 0);
if (ret)
return ret;
}
/* These flags are for resource streamer on HSW+ */
if (!IS_HASWELL(ring->dev) && INTEL_INFO(ring->dev)->gen < 8)
flags |= (MI_SAVE_EXT_STATE_EN | MI_RESTORE_EXT_STATE_EN);
len = 4;
if (INTEL_INFO(ring->dev)->gen >= 7)
len += 2 + (num_rings ? 4*num_rings + 2 : 0);
ret = intel_ring_begin(ring, len);
if (ret)
return ret;
/* WaProgramMiArbOnOffAroundMiSetContext:ivb,vlv,hsw,bdw,chv */
if (INTEL_INFO(ring->dev)->gen >= 7) {
intel_ring_emit(ring, MI_ARB_ON_OFF | MI_ARB_DISABLE);
if (num_rings) {
struct intel_engine_cs *signaller;
intel_ring_emit(ring, MI_LOAD_REGISTER_IMM(num_rings));
for_each_ring(signaller, to_i915(ring->dev), i) {
if (signaller == ring)
continue;
intel_ring_emit(ring, RING_PSMI_CTL(signaller->mmio_base));
intel_ring_emit(ring, _MASKED_BIT_ENABLE(GEN6_PSMI_SLEEP_MSG_DISABLE));
}
}
}
intel_ring_emit(ring, MI_NOOP);
intel_ring_emit(ring, MI_SET_CONTEXT);
intel_ring_emit(ring, i915_gem_obj_ggtt_offset(new_context->legacy_hw_ctx.rcs_state) |
flags);
/*
* w/a: MI_SET_CONTEXT must always be followed by MI_NOOP
* WaMiSetContext_Hang:snb,ivb,vlv
*/
intel_ring_emit(ring, MI_NOOP);
if (INTEL_INFO(ring->dev)->gen >= 7) {
if (num_rings) {
struct intel_engine_cs *signaller;
intel_ring_emit(ring, MI_LOAD_REGISTER_IMM(num_rings));
for_each_ring(signaller, to_i915(ring->dev), i) {
if (signaller == ring)
continue;
intel_ring_emit(ring, RING_PSMI_CTL(signaller->mmio_base));
intel_ring_emit(ring, _MASKED_BIT_DISABLE(GEN6_PSMI_SLEEP_MSG_DISABLE));
}
}
intel_ring_emit(ring, MI_ARB_ON_OFF | MI_ARB_ENABLE);
}
intel_ring_advance(ring);
return ret;
}
static inline bool should_skip_switch(struct intel_engine_cs *ring,
struct intel_context *from,
struct intel_context *to)
{
struct drm_i915_private *dev_priv = ring->dev->dev_private;
if (to->remap_slice)
return false;
if (to->ppgtt) {
if (from == to && !test_bit(ring->id,
&to->ppgtt->pd_dirty_rings))
return true;
} else if (dev_priv->mm.aliasing_ppgtt) {
if (from == to && !test_bit(ring->id,
&dev_priv->mm.aliasing_ppgtt->pd_dirty_rings))
return true;
}
return false;
}
static bool
needs_pd_load_pre(struct intel_engine_cs *ring, struct intel_context *to)
{
struct drm_i915_private *dev_priv = ring->dev->dev_private;
if (!to->ppgtt)
return false;
if (INTEL_INFO(ring->dev)->gen < 8)
return true;
if (ring != &dev_priv->ring[RCS])
return true;
return false;
}
static bool
needs_pd_load_post(struct intel_engine_cs *ring, struct intel_context *to,
u32 hw_flags)
{
struct drm_i915_private *dev_priv = ring->dev->dev_private;
if (!to->ppgtt)
return false;
if (!IS_GEN8(ring->dev))
return false;
if (ring != &dev_priv->ring[RCS])
return false;
if (hw_flags & MI_RESTORE_INHIBIT)
return true;
return false;
}
static int do_switch(struct intel_engine_cs *ring,
struct intel_context *to)
{
struct drm_i915_private *dev_priv = ring->dev->dev_private;
struct intel_context *from = ring->last_context;
u32 hw_flags = 0;
bool uninitialized = false;
struct i915_vma *vma;
int ret, i;
if (from != NULL && ring == &dev_priv->ring[RCS]) {
BUG_ON(from->legacy_hw_ctx.rcs_state == NULL);
BUG_ON(!i915_gem_obj_is_pinned(from->legacy_hw_ctx.rcs_state));
}
if (should_skip_switch(ring, from, to))
return 0;
/* Trying to pin first makes error handling easier. */
if (ring == &dev_priv->ring[RCS]) {
ret = i915_gem_obj_ggtt_pin(to->legacy_hw_ctx.rcs_state,
get_context_alignment(ring->dev), 0);
if (ret)
return ret;
}
/*
* Pin can switch back to the default context if we end up calling into
* evict_everything - as a last ditch gtt defrag effort that also
* switches to the default context. Hence we need to reload from here.
*/
from = ring->last_context;
if (needs_pd_load_pre(ring, to)) {
/* Older GENs and non render rings still want the load first,
* "PP_DCLV followed by PP_DIR_BASE register through Load
* Register Immediate commands in Ring Buffer before submitting
* a context."*/
trace_switch_mm(ring, to);
ret = to->ppgtt->switch_mm(to->ppgtt, ring);
if (ret)
goto unpin_out;
/* Doing a PD load always reloads the page dirs */
clear_bit(ring->id, &to->ppgtt->pd_dirty_rings);
}
if (ring != &dev_priv->ring[RCS]) {
if (from)
i915_gem_context_unreference(from);
goto done;
}
/*
* Clear this page out of any CPU caches for coherent swap-in/out. Note
* that thanks to write = false in this call and us not setting any gpu
* write domains when putting a context object onto the active list
* (when switching away from it), this won't block.
*
* XXX: We need a real interface to do this instead of trickery.
*/
ret = i915_gem_object_set_to_gtt_domain(to->legacy_hw_ctx.rcs_state, false);
if (ret)
goto unpin_out;
vma = i915_gem_obj_to_ggtt(to->legacy_hw_ctx.rcs_state);
if (!(vma->bound & GLOBAL_BIND)) {
ret = i915_vma_bind(vma,
to->legacy_hw_ctx.rcs_state->cache_level,
GLOBAL_BIND);
/* This shouldn't ever fail. */
if (WARN_ONCE(ret, "GGTT context bind failed!"))
goto unpin_out;
}
if (!to->legacy_hw_ctx.initialized) {
hw_flags |= MI_RESTORE_INHIBIT;
/* NB: If we inhibit the restore, the context is not allowed to
* die because future work may end up depending on valid address
* space. This means we must enforce that a page table load
* occur when this occurs. */
} else if (to->ppgtt &&
test_and_clear_bit(ring->id, &to->ppgtt->pd_dirty_rings))
hw_flags |= MI_FORCE_RESTORE;
/* We should never emit switch_mm more than once */
WARN_ON(needs_pd_load_pre(ring, to) &&
needs_pd_load_post(ring, to, hw_flags));
ret = mi_set_context(ring, to, hw_flags);
if (ret)
goto unpin_out;
/* GEN8 does *not* require an explicit reload if the PDPs have been
* setup, and we do not wish to move them.
*/
if (needs_pd_load_post(ring, to, hw_flags)) {
trace_switch_mm(ring, to);
ret = to->ppgtt->switch_mm(to->ppgtt, ring);
/* The hardware context switch is emitted, but we haven't
* actually changed the state - so it's probably safe to bail
* here. Still, let the user know something dangerous has
* happened.
*/
if (ret) {
DRM_ERROR("Failed to change address space on context switch\n");
goto unpin_out;
}
}
for (i = 0; i < MAX_L3_SLICES; i++) {
if (!(to->remap_slice & (1<<i)))
continue;
ret = i915_gem_l3_remap(ring, i);
/* If it failed, try again next round */
if (ret)
DRM_DEBUG_DRIVER("L3 remapping failed\n");
else
to->remap_slice &= ~(1<<i);
}
/* The backing object for the context is done after switching to the
* *next* context. Therefore we cannot retire the previous context until
* the next context has already started running. In fact, the below code
* is a bit suboptimal because the retiring can occur simply after the
* MI_SET_CONTEXT instead of when the next seqno has completed.
*/
if (from != NULL) {
from->legacy_hw_ctx.rcs_state->base.read_domains = I915_GEM_DOMAIN_INSTRUCTION;
i915_vma_move_to_active(i915_gem_obj_to_ggtt(from->legacy_hw_ctx.rcs_state), ring);
/* As long as MI_SET_CONTEXT is serializing, ie. it flushes the
* whole damn pipeline, we don't need to explicitly mark the
* object dirty. The only exception is that the context must be
* correct in case the object gets swapped out. Ideally we'd be
* able to defer doing this until we know the object would be
* swapped, but there is no way to do that yet.
*/
from->legacy_hw_ctx.rcs_state->dirty = 1;
BUG_ON(i915_gem_request_get_ring(
from->legacy_hw_ctx.rcs_state->last_read_req) != ring);
/* obj is kept alive until the next request by its active ref */
i915_gem_object_ggtt_unpin(from->legacy_hw_ctx.rcs_state);
i915_gem_context_unreference(from);
}
uninitialized = !to->legacy_hw_ctx.initialized;
to->legacy_hw_ctx.initialized = true;
done:
i915_gem_context_reference(to);
ring->last_context = to;
if (uninitialized) {
if (ring->init_context) {
ret = ring->init_context(ring, to);
if (ret)
DRM_ERROR("ring init context: %d\n", ret);
}
}
return 0;
unpin_out:
if (ring->id == RCS)
i915_gem_object_ggtt_unpin(to->legacy_hw_ctx.rcs_state);
return ret;
}
/**
* i915_switch_context() - perform a GPU context switch.
* @ring: ring for which we'll execute the context switch
* @to: the context to switch to
*
* The context life cycle is simple. The context refcount is incremented and
* decremented by 1 and create and destroy. If the context is in use by the GPU,
* it will have a refcount > 1. This allows us to destroy the context abstract
* object while letting the normal object tracking destroy the backing BO.
*
* This function should not be used in execlists mode. Instead the context is
* switched by writing to the ELSP and requests keep a reference to their
* context.
*/
int i915_switch_context(struct intel_engine_cs *ring,
struct intel_context *to)
{
struct drm_i915_private *dev_priv = ring->dev->dev_private;
WARN_ON(i915.enable_execlists);
WARN_ON(!mutex_is_locked(&dev_priv->dev->struct_mutex));
if (to->legacy_hw_ctx.rcs_state == NULL) { /* We have the fake context */
if (to != ring->last_context) {
i915_gem_context_reference(to);
if (ring->last_context)
i915_gem_context_unreference(ring->last_context);
ring->last_context = to;
}
return 0;
}
return do_switch(ring, to);
}
static bool contexts_enabled(struct drm_device *dev)
{
return i915.enable_execlists || to_i915(dev)->hw_context_size;
}
int i915_gem_context_create_ioctl(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_i915_gem_context_create *args = data;
struct drm_i915_file_private *file_priv = file->driver_priv;
struct intel_context *ctx;
int ret;
if (!contexts_enabled(dev))
return -ENODEV;
ret = i915_mutex_lock_interruptible(dev);
if (ret)
return ret;
ctx = i915_gem_create_context(dev, file_priv);
mutex_unlock(&dev->struct_mutex);
if (IS_ERR(ctx))
return PTR_ERR(ctx);
args->ctx_id = ctx->user_handle;
DRM_DEBUG_DRIVER("HW context %d created\n", args->ctx_id);
return 0;
}
int i915_gem_context_destroy_ioctl(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_i915_gem_context_destroy *args = data;
struct drm_i915_file_private *file_priv = file->driver_priv;
struct intel_context *ctx;
int ret;
if (args->ctx_id == DEFAULT_CONTEXT_HANDLE)
return -ENOENT;
ret = i915_mutex_lock_interruptible(dev);
if (ret)
return ret;
ctx = i915_gem_context_get(file_priv, args->ctx_id);
if (IS_ERR(ctx)) {
mutex_unlock(&dev->struct_mutex);
return PTR_ERR(ctx);
}
idr_remove(&ctx->file_priv->context_idr, ctx->user_handle);
i915_gem_context_unreference(ctx);
mutex_unlock(&dev->struct_mutex);
DRM_DEBUG_DRIVER("HW context %d destroyed\n", args->ctx_id);
return 0;
}
int i915_gem_context_getparam_ioctl(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_i915_file_private *file_priv = file->driver_priv;
struct drm_i915_gem_context_param *args = data;
struct intel_context *ctx;
int ret;
ret = i915_mutex_lock_interruptible(dev);
if (ret)
return ret;
ctx = i915_gem_context_get(file_priv, args->ctx_id);
if (IS_ERR(ctx)) {
mutex_unlock(&dev->struct_mutex);
return PTR_ERR(ctx);
}
args->size = 0;
switch (args->param) {
case I915_CONTEXT_PARAM_BAN_PERIOD:
args->value = ctx->hang_stats.ban_period_seconds;
break;
default:
ret = -EINVAL;
break;
}
mutex_unlock(&dev->struct_mutex);
return ret;
}
int i915_gem_context_setparam_ioctl(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_i915_file_private *file_priv = file->driver_priv;
struct drm_i915_gem_context_param *args = data;
struct intel_context *ctx;
int ret;
ret = i915_mutex_lock_interruptible(dev);
if (ret)
return ret;
ctx = i915_gem_context_get(file_priv, args->ctx_id);
if (IS_ERR(ctx)) {
mutex_unlock(&dev->struct_mutex);
return PTR_ERR(ctx);
}
switch (args->param) {
case I915_CONTEXT_PARAM_BAN_PERIOD:
if (args->size)
ret = -EINVAL;
else if (args->value < ctx->hang_stats.ban_period_seconds &&
!capable(CAP_SYS_ADMIN))
ret = -EPERM;
else
ctx->hang_stats.ban_period_seconds = args->value;
break;
default:
ret = -EINVAL;
break;
}
mutex_unlock(&dev->struct_mutex);
return ret;
}