- 根目录:
- drivers
- gpu
- drm
- radeon
- sid.h
/*
* Copyright 2011 Advanced Micro Devices, Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*
* Authors: Alex Deucher
*/
#ifndef SI_H
#define SI_H
#define TAHITI_RB_BITMAP_WIDTH_PER_SH 2
#define TAHITI_GB_ADDR_CONFIG_GOLDEN 0x12011003
#define VERDE_GB_ADDR_CONFIG_GOLDEN 0x12010002
#define HAINAN_GB_ADDR_CONFIG_GOLDEN 0x02010001
#define SI_MAX_SH_GPRS 256
#define SI_MAX_TEMP_GPRS 16
#define SI_MAX_SH_THREADS 256
#define SI_MAX_SH_STACK_ENTRIES 4096
#define SI_MAX_FRC_EOV_CNT 16384
#define SI_MAX_BACKENDS 8
#define SI_MAX_BACKENDS_MASK 0xFF
#define SI_MAX_BACKENDS_PER_SE_MASK 0x0F
#define SI_MAX_SIMDS 12
#define SI_MAX_SIMDS_MASK 0x0FFF
#define SI_MAX_SIMDS_PER_SE_MASK 0x00FF
#define SI_MAX_PIPES 8
#define SI_MAX_PIPES_MASK 0xFF
#define SI_MAX_PIPES_PER_SIMD_MASK 0x3F
#define SI_MAX_LDS_NUM 0xFFFF
#define SI_MAX_TCC 16
#define SI_MAX_TCC_MASK 0xFFFF
/* SMC IND accessor regs */
#define SMC_IND_INDEX_0 0x200
#define SMC_IND_DATA_0 0x204
#define SMC_IND_ACCESS_CNTL 0x228
# define AUTO_INCREMENT_IND_0 (1 << 0)
#define SMC_MESSAGE_0 0x22c
#define SMC_RESP_0 0x230
/* CG IND registers are accessed via SMC indirect space + SMC_CG_IND_START */
#define SMC_CG_IND_START 0xc0030000
#define SMC_CG_IND_END 0xc0040000
#define CG_CGTT_LOCAL_0 0x400
#define CG_CGTT_LOCAL_1 0x401
/* SMC IND registers */
#define SMC_SYSCON_RESET_CNTL 0x80000000
# define RST_REG (1 << 0)
#define SMC_SYSCON_CLOCK_CNTL_0 0x80000004
# define CK_DISABLE (1 << 0)
# define CKEN (1 << 24)
#define VGA_HDP_CONTROL 0x328
#define VGA_MEMORY_DISABLE (1 << 4)
#define DCCG_DISP_SLOW_SELECT_REG 0x4fc
#define DCCG_DISP1_SLOW_SELECT(x) ((x) << 0)
#define DCCG_DISP1_SLOW_SELECT_MASK (7 << 0)
#define DCCG_DISP1_SLOW_SELECT_SHIFT 0
#define DCCG_DISP2_SLOW_SELECT(x) ((x) << 4)
#define DCCG_DISP2_SLOW_SELECT_MASK (7 << 4)
#define DCCG_DISP2_SLOW_SELECT_SHIFT 4
#define CG_SPLL_FUNC_CNTL 0x600
#define SPLL_RESET (1 << 0)
#define SPLL_SLEEP (1 << 1)
#define SPLL_BYPASS_EN (1 << 3)
#define SPLL_REF_DIV(x) ((x) << 4)
#define SPLL_REF_DIV_MASK (0x3f << 4)
#define SPLL_PDIV_A(x) ((x) << 20)
#define SPLL_PDIV_A_MASK (0x7f << 20)
#define SPLL_PDIV_A_SHIFT 20
#define CG_SPLL_FUNC_CNTL_2 0x604
#define SCLK_MUX_SEL(x) ((x) << 0)
#define SCLK_MUX_SEL_MASK (0x1ff << 0)
#define SPLL_CTLREQ_CHG (1 << 23)
#define SCLK_MUX_UPDATE (1 << 26)
#define CG_SPLL_FUNC_CNTL_3 0x608
#define SPLL_FB_DIV(x) ((x) << 0)
#define SPLL_FB_DIV_MASK (0x3ffffff << 0)
#define SPLL_FB_DIV_SHIFT 0
#define SPLL_DITHEN (1 << 28)
#define CG_SPLL_FUNC_CNTL_4 0x60c
#define SPLL_STATUS 0x614
#define SPLL_CHG_STATUS (1 << 1)
#define SPLL_CNTL_MODE 0x618
#define SPLL_SW_DIR_CONTROL (1 << 0)
# define SPLL_REFCLK_SEL(x) ((x) << 26)
# define SPLL_REFCLK_SEL_MASK (3 << 26)
#define CG_SPLL_SPREAD_SPECTRUM 0x620
#define SSEN (1 << 0)
#define CLK_S(x) ((x) << 4)
#define CLK_S_MASK (0xfff << 4)
#define CLK_S_SHIFT 4
#define CG_SPLL_SPREAD_SPECTRUM_2 0x624
#define CLK_V(x) ((x) << 0)
#define CLK_V_MASK (0x3ffffff << 0)
#define CLK_V_SHIFT 0
#define CG_SPLL_AUTOSCALE_CNTL 0x62c
# define AUTOSCALE_ON_SS_CLEAR (1 << 9)
/* discrete uvd clocks */
#define CG_UPLL_FUNC_CNTL 0x634
# define UPLL_RESET_MASK 0x00000001
# define UPLL_SLEEP_MASK 0x00000002
# define UPLL_BYPASS_EN_MASK 0x00000004
# define UPLL_CTLREQ_MASK 0x00000008
# define UPLL_VCO_MODE_MASK 0x00000600
# define UPLL_REF_DIV_MASK 0x003F0000
# define UPLL_CTLACK_MASK 0x40000000
# define UPLL_CTLACK2_MASK 0x80000000
#define CG_UPLL_FUNC_CNTL_2 0x638
# define UPLL_PDIV_A(x) ((x) << 0)
# define UPLL_PDIV_A_MASK 0x0000007F
# define UPLL_PDIV_B(x) ((x) << 8)
# define UPLL_PDIV_B_MASK 0x00007F00
# define VCLK_SRC_SEL(x) ((x) << 20)
# define VCLK_SRC_SEL_MASK 0x01F00000
# define DCLK_SRC_SEL(x) ((x) << 25)
# define DCLK_SRC_SEL_MASK 0x3E000000
#define CG_UPLL_FUNC_CNTL_3 0x63C
# define UPLL_FB_DIV(x) ((x) << 0)
# define UPLL_FB_DIV_MASK 0x01FFFFFF
#define CG_UPLL_FUNC_CNTL_4 0x644
# define UPLL_SPARE_ISPARE9 0x00020000
#define CG_UPLL_FUNC_CNTL_5 0x648
# define RESET_ANTI_MUX_MASK 0x00000200
#define CG_UPLL_SPREAD_SPECTRUM 0x650
# define SSEN_MASK 0x00000001
#define MPLL_BYPASSCLK_SEL 0x65c
# define MPLL_CLKOUT_SEL(x) ((x) << 8)
# define MPLL_CLKOUT_SEL_MASK 0xFF00
#define CG_CLKPIN_CNTL 0x660
# define XTALIN_DIVIDE (1 << 1)
# define BCLK_AS_XCLK (1 << 2)
#define CG_CLKPIN_CNTL_2 0x664
# define FORCE_BIF_REFCLK_EN (1 << 3)
# define MUX_TCLK_TO_XCLK (1 << 8)
#define THM_CLK_CNTL 0x66c
# define CMON_CLK_SEL(x) ((x) << 0)
# define CMON_CLK_SEL_MASK 0xFF
# define TMON_CLK_SEL(x) ((x) << 8)
# define TMON_CLK_SEL_MASK 0xFF00
#define MISC_CLK_CNTL 0x670
# define DEEP_SLEEP_CLK_SEL(x) ((x) << 0)
# define DEEP_SLEEP_CLK_SEL_MASK 0xFF
# define ZCLK_SEL(x) ((x) << 8)
# define ZCLK_SEL_MASK 0xFF00
#define CG_THERMAL_CTRL 0x700
#define DPM_EVENT_SRC(x) ((x) << 0)
#define DPM_EVENT_SRC_MASK (7 << 0)
#define DIG_THERM_DPM(x) ((x) << 14)
#define DIG_THERM_DPM_MASK 0x003FC000
#define DIG_THERM_DPM_SHIFT 14
#define CG_THERMAL_STATUS 0x704
#define FDO_PWM_DUTY(x) ((x) << 9)
#define FDO_PWM_DUTY_MASK (0xff << 9)
#define FDO_PWM_DUTY_SHIFT 9
#define CG_THERMAL_INT 0x708
#define DIG_THERM_INTH(x) ((x) << 8)
#define DIG_THERM_INTH_MASK 0x0000FF00
#define DIG_THERM_INTH_SHIFT 8
#define DIG_THERM_INTL(x) ((x) << 16)
#define DIG_THERM_INTL_MASK 0x00FF0000
#define DIG_THERM_INTL_SHIFT 16
#define THERM_INT_MASK_HIGH (1 << 24)
#define THERM_INT_MASK_LOW (1 << 25)
#define CG_MULT_THERMAL_CTRL 0x710
#define TEMP_SEL(x) ((x) << 20)
#define TEMP_SEL_MASK (0xff << 20)
#define TEMP_SEL_SHIFT 20
#define CG_MULT_THERMAL_STATUS 0x714
#define ASIC_MAX_TEMP(x) ((x) << 0)
#define ASIC_MAX_TEMP_MASK 0x000001ff
#define ASIC_MAX_TEMP_SHIFT 0
#define CTF_TEMP(x) ((x) << 9)
#define CTF_TEMP_MASK 0x0003fe00
#define CTF_TEMP_SHIFT 9
#define CG_FDO_CTRL0 0x754
#define FDO_STATIC_DUTY(x) ((x) << 0)
#define FDO_STATIC_DUTY_MASK 0x000000FF
#define FDO_STATIC_DUTY_SHIFT 0
#define CG_FDO_CTRL1 0x758
#define FMAX_DUTY100(x) ((x) << 0)
#define FMAX_DUTY100_MASK 0x000000FF
#define FMAX_DUTY100_SHIFT 0
#define CG_FDO_CTRL2 0x75C
#define TMIN(x) ((x) << 0)
#define TMIN_MASK 0x000000FF
#define TMIN_SHIFT 0
#define FDO_PWM_MODE(x) ((x) << 11)
#define FDO_PWM_MODE_MASK (7 << 11)
#define FDO_PWM_MODE_SHIFT 11
#define TACH_PWM_RESP_RATE(x) ((x) << 25)
#define TACH_PWM_RESP_RATE_MASK (0x7f << 25)
#define TACH_PWM_RESP_RATE_SHIFT 25
#define CG_TACH_CTRL 0x770
# define EDGE_PER_REV(x) ((x) << 0)
# define EDGE_PER_REV_MASK (0x7 << 0)
# define EDGE_PER_REV_SHIFT 0
# define TARGET_PERIOD(x) ((x) << 3)
# define TARGET_PERIOD_MASK 0xfffffff8
# define TARGET_PERIOD_SHIFT 3
#define CG_TACH_STATUS 0x774
# define TACH_PERIOD(x) ((x) << 0)
# define TACH_PERIOD_MASK 0xffffffff
# define TACH_PERIOD_SHIFT 0
#define GENERAL_PWRMGT 0x780
# define GLOBAL_PWRMGT_EN (1 << 0)
# define STATIC_PM_EN (1 << 1)
# define THERMAL_PROTECTION_DIS (1 << 2)
# define THERMAL_PROTECTION_TYPE (1 << 3)
# define SW_SMIO_INDEX(x) ((x) << 6)
# define SW_SMIO_INDEX_MASK (1 << 6)
# define SW_SMIO_INDEX_SHIFT 6
# define VOLT_PWRMGT_EN (1 << 10)
# define DYN_SPREAD_SPECTRUM_EN (1 << 23)
#define CG_TPC 0x784
#define SCLK_PWRMGT_CNTL 0x788
# define SCLK_PWRMGT_OFF (1 << 0)
# define SCLK_LOW_D1 (1 << 1)
# define FIR_RESET (1 << 4)
# define FIR_FORCE_TREND_SEL (1 << 5)
# define FIR_TREND_MODE (1 << 6)
# define DYN_GFX_CLK_OFF_EN (1 << 7)
# define GFX_CLK_FORCE_ON (1 << 8)
# define GFX_CLK_REQUEST_OFF (1 << 9)
# define GFX_CLK_FORCE_OFF (1 << 10)
# define GFX_CLK_OFF_ACPI_D1 (1 << 11)
# define GFX_CLK_OFF_ACPI_D2 (1 << 12)
# define GFX_CLK_OFF_ACPI_D3 (1 << 13)
# define DYN_LIGHT_SLEEP_EN (1 << 14)
#define TARGET_AND_CURRENT_PROFILE_INDEX 0x798
# define CURRENT_STATE_INDEX_MASK (0xf << 4)
# define CURRENT_STATE_INDEX_SHIFT 4
#define CG_FTV 0x7bc
#define CG_FFCT_0 0x7c0
# define UTC_0(x) ((x) << 0)
# define UTC_0_MASK (0x3ff << 0)
# define DTC_0(x) ((x) << 10)
# define DTC_0_MASK (0x3ff << 10)
#define CG_BSP 0x7fc
# define BSP(x) ((x) << 0)
# define BSP_MASK (0xffff << 0)
# define BSU(x) ((x) << 16)
# define BSU_MASK (0xf << 16)
#define CG_AT 0x800
# define CG_R(x) ((x) << 0)
# define CG_R_MASK (0xffff << 0)
# define CG_L(x) ((x) << 16)
# define CG_L_MASK (0xffff << 16)
#define CG_GIT 0x804
# define CG_GICST(x) ((x) << 0)
# define CG_GICST_MASK (0xffff << 0)
# define CG_GIPOT(x) ((x) << 16)
# define CG_GIPOT_MASK (0xffff << 16)
#define CG_SSP 0x80c
# define SST(x) ((x) << 0)
# define SST_MASK (0xffff << 0)
# define SSTU(x) ((x) << 16)
# define SSTU_MASK (0xf << 16)
#define CG_DISPLAY_GAP_CNTL 0x828
# define DISP1_GAP(x) ((x) << 0)
# define DISP1_GAP_MASK (3 << 0)
# define DISP2_GAP(x) ((x) << 2)
# define DISP2_GAP_MASK (3 << 2)
# define VBI_TIMER_COUNT(x) ((x) << 4)
# define VBI_TIMER_COUNT_MASK (0x3fff << 4)
# define VBI_TIMER_UNIT(x) ((x) << 20)
# define VBI_TIMER_UNIT_MASK (7 << 20)
# define DISP1_GAP_MCHG(x) ((x) << 24)
# define DISP1_GAP_MCHG_MASK (3 << 24)
# define DISP2_GAP_MCHG(x) ((x) << 26)
# define DISP2_GAP_MCHG_MASK (3 << 26)
#define CG_ULV_CONTROL 0x878
#define CG_ULV_PARAMETER 0x87c
#define SMC_SCRATCH0 0x884
#define CG_CAC_CTRL 0x8b8
# define CAC_WINDOW(x) ((x) << 0)
# define CAC_WINDOW_MASK 0x00ffffff
#define DMIF_ADDR_CONFIG 0xBD4
#define DMIF_ADDR_CALC 0xC00
#define PIPE0_DMIF_BUFFER_CONTROL 0x0ca0
# define DMIF_BUFFERS_ALLOCATED(x) ((x) << 0)
# define DMIF_BUFFERS_ALLOCATED_COMPLETED (1 << 4)
#define SRBM_STATUS 0xE50
#define GRBM_RQ_PENDING (1 << 5)
#define VMC_BUSY (1 << 8)
#define MCB_BUSY (1 << 9)
#define MCB_NON_DISPLAY_BUSY (1 << 10)
#define MCC_BUSY (1 << 11)
#define MCD_BUSY (1 << 12)
#define SEM_BUSY (1 << 14)
#define IH_BUSY (1 << 17)
#define SRBM_SOFT_RESET 0x0E60
#define SOFT_RESET_BIF (1 << 1)
#define SOFT_RESET_DC (1 << 5)
#define SOFT_RESET_DMA1 (1 << 6)
#define SOFT_RESET_GRBM (1 << 8)
#define SOFT_RESET_HDP (1 << 9)
#define SOFT_RESET_IH (1 << 10)
#define SOFT_RESET_MC (1 << 11)
#define SOFT_RESET_ROM (1 << 14)
#define SOFT_RESET_SEM (1 << 15)
#define SOFT_RESET_VMC (1 << 17)
#define SOFT_RESET_DMA (1 << 20)
#define SOFT_RESET_TST (1 << 21)
#define SOFT_RESET_REGBB (1 << 22)
#define SOFT_RESET_ORB (1 << 23)
#define CC_SYS_RB_BACKEND_DISABLE 0xe80
#define GC_USER_SYS_RB_BACKEND_DISABLE 0xe84
#define SRBM_READ_ERROR 0xE98
#define SRBM_INT_CNTL 0xEA0
#define SRBM_INT_ACK 0xEA8
#define SRBM_STATUS2 0x0EC4
#define DMA_BUSY (1 << 5)
#define DMA1_BUSY (1 << 6)
#define VM_L2_CNTL 0x1400
#define ENABLE_L2_CACHE (1 << 0)
#define ENABLE_L2_FRAGMENT_PROCESSING (1 << 1)
#define L2_CACHE_PTE_ENDIAN_SWAP_MODE(x) ((x) << 2)
#define L2_CACHE_PDE_ENDIAN_SWAP_MODE(x) ((x) << 4)
#define ENABLE_L2_PTE_CACHE_LRU_UPDATE_BY_WRITE (1 << 9)
#define ENABLE_L2_PDE0_CACHE_LRU_UPDATE_BY_WRITE (1 << 10)
#define EFFECTIVE_L2_QUEUE_SIZE(x) (((x) & 7) << 15)
#define CONTEXT1_IDENTITY_ACCESS_MODE(x) (((x) & 3) << 19)
#define VM_L2_CNTL2 0x1404
#define INVALIDATE_ALL_L1_TLBS (1 << 0)
#define INVALIDATE_L2_CACHE (1 << 1)
#define INVALIDATE_CACHE_MODE(x) ((x) << 26)
#define INVALIDATE_PTE_AND_PDE_CACHES 0
#define INVALIDATE_ONLY_PTE_CACHES 1
#define INVALIDATE_ONLY_PDE_CACHES 2
#define VM_L2_CNTL3 0x1408
#define BANK_SELECT(x) ((x) << 0)
#define L2_CACHE_UPDATE_MODE(x) ((x) << 6)
#define L2_CACHE_BIGK_FRAGMENT_SIZE(x) ((x) << 15)
#define L2_CACHE_BIGK_ASSOCIATIVITY (1 << 20)
#define VM_L2_STATUS 0x140C
#define L2_BUSY (1 << 0)
#define VM_CONTEXT0_CNTL 0x1410
#define ENABLE_CONTEXT (1 << 0)
#define PAGE_TABLE_DEPTH(x) (((x) & 3) << 1)
#define RANGE_PROTECTION_FAULT_ENABLE_INTERRUPT (1 << 3)
#define RANGE_PROTECTION_FAULT_ENABLE_DEFAULT (1 << 4)
#define DUMMY_PAGE_PROTECTION_FAULT_ENABLE_INTERRUPT (1 << 6)
#define DUMMY_PAGE_PROTECTION_FAULT_ENABLE_DEFAULT (1 << 7)
#define PDE0_PROTECTION_FAULT_ENABLE_INTERRUPT (1 << 9)
#define PDE0_PROTECTION_FAULT_ENABLE_DEFAULT (1 << 10)
#define VALID_PROTECTION_FAULT_ENABLE_INTERRUPT (1 << 12)
#define VALID_PROTECTION_FAULT_ENABLE_DEFAULT (1 << 13)
#define READ_PROTECTION_FAULT_ENABLE_INTERRUPT (1 << 15)
#define READ_PROTECTION_FAULT_ENABLE_DEFAULT (1 << 16)
#define WRITE_PROTECTION_FAULT_ENABLE_INTERRUPT (1 << 18)
#define WRITE_PROTECTION_FAULT_ENABLE_DEFAULT (1 << 19)
#define PAGE_TABLE_BLOCK_SIZE(x) (((x) & 0xF) << 24)
#define VM_CONTEXT1_CNTL 0x1414
#define VM_CONTEXT0_CNTL2 0x1430
#define VM_CONTEXT1_CNTL2 0x1434
#define VM_CONTEXT8_PAGE_TABLE_BASE_ADDR 0x1438
#define VM_CONTEXT9_PAGE_TABLE_BASE_ADDR 0x143c
#define VM_CONTEXT10_PAGE_TABLE_BASE_ADDR 0x1440
#define VM_CONTEXT11_PAGE_TABLE_BASE_ADDR 0x1444
#define VM_CONTEXT12_PAGE_TABLE_BASE_ADDR 0x1448
#define VM_CONTEXT13_PAGE_TABLE_BASE_ADDR 0x144c
#define VM_CONTEXT14_PAGE_TABLE_BASE_ADDR 0x1450
#define VM_CONTEXT15_PAGE_TABLE_BASE_ADDR 0x1454
#define VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x14FC
#define VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x14DC
#define PROTECTIONS_MASK (0xf << 0)
#define PROTECTIONS_SHIFT 0
/* bit 0: range
* bit 1: pde0
* bit 2: valid
* bit 3: read
* bit 4: write
*/
#define MEMORY_CLIENT_ID_MASK (0xff << 12)
#define MEMORY_CLIENT_ID_SHIFT 12
#define MEMORY_CLIENT_RW_MASK (1 << 24)
#define MEMORY_CLIENT_RW_SHIFT 24
#define FAULT_VMID_MASK (0xf << 25)
#define FAULT_VMID_SHIFT 25
#define VM_INVALIDATE_REQUEST 0x1478
#define VM_INVALIDATE_RESPONSE 0x147c
#define VM_CONTEXT0_PROTECTION_FAULT_DEFAULT_ADDR 0x1518
#define VM_CONTEXT1_PROTECTION_FAULT_DEFAULT_ADDR 0x151c
#define VM_CONTEXT0_PAGE_TABLE_BASE_ADDR 0x153c
#define VM_CONTEXT1_PAGE_TABLE_BASE_ADDR 0x1540
#define VM_CONTEXT2_PAGE_TABLE_BASE_ADDR 0x1544
#define VM_CONTEXT3_PAGE_TABLE_BASE_ADDR 0x1548
#define VM_CONTEXT4_PAGE_TABLE_BASE_ADDR 0x154c
#define VM_CONTEXT5_PAGE_TABLE_BASE_ADDR 0x1550
#define VM_CONTEXT6_PAGE_TABLE_BASE_ADDR 0x1554
#define VM_CONTEXT7_PAGE_TABLE_BASE_ADDR 0x1558
#define VM_CONTEXT0_PAGE_TABLE_START_ADDR 0x155c
#define VM_CONTEXT1_PAGE_TABLE_START_ADDR 0x1560
#define VM_CONTEXT0_PAGE_TABLE_END_ADDR 0x157C
#define VM_CONTEXT1_PAGE_TABLE_END_ADDR 0x1580
#define VM_L2_CG 0x15c0
#define MC_CG_ENABLE (1 << 18)
#define MC_LS_ENABLE (1 << 19)
#define MC_SHARED_CHMAP 0x2004
#define NOOFCHAN_SHIFT 12
#define NOOFCHAN_MASK 0x0000f000
#define MC_SHARED_CHREMAP 0x2008
#define MC_VM_FB_LOCATION 0x2024
#define MC_VM_AGP_TOP 0x2028
#define MC_VM_AGP_BOT 0x202C
#define MC_VM_AGP_BASE 0x2030
#define MC_VM_SYSTEM_APERTURE_LOW_ADDR 0x2034
#define MC_VM_SYSTEM_APERTURE_HIGH_ADDR 0x2038
#define MC_VM_SYSTEM_APERTURE_DEFAULT_ADDR 0x203C
#define MC_VM_MX_L1_TLB_CNTL 0x2064
#define ENABLE_L1_TLB (1 << 0)
#define ENABLE_L1_FRAGMENT_PROCESSING (1 << 1)
#define SYSTEM_ACCESS_MODE_PA_ONLY (0 << 3)
#define SYSTEM_ACCESS_MODE_USE_SYS_MAP (1 << 3)
#define SYSTEM_ACCESS_MODE_IN_SYS (2 << 3)
#define SYSTEM_ACCESS_MODE_NOT_IN_SYS (3 << 3)
#define SYSTEM_APERTURE_UNMAPPED_ACCESS_PASS_THRU (0 << 5)
#define ENABLE_ADVANCED_DRIVER_MODEL (1 << 6)
#define MC_SHARED_BLACKOUT_CNTL 0x20ac
#define MC_HUB_MISC_HUB_CG 0x20b8
#define MC_HUB_MISC_VM_CG 0x20bc
#define MC_HUB_MISC_SIP_CG 0x20c0
#define MC_XPB_CLK_GAT 0x2478
#define MC_CITF_MISC_RD_CG 0x2648
#define MC_CITF_MISC_WR_CG 0x264c
#define MC_CITF_MISC_VM_CG 0x2650
#define MC_ARB_RAMCFG 0x2760
#define NOOFBANK_SHIFT 0
#define NOOFBANK_MASK 0x00000003
#define NOOFRANK_SHIFT 2
#define NOOFRANK_MASK 0x00000004
#define NOOFROWS_SHIFT 3
#define NOOFROWS_MASK 0x00000038
#define NOOFCOLS_SHIFT 6
#define NOOFCOLS_MASK 0x000000C0
#define CHANSIZE_SHIFT 8
#define CHANSIZE_MASK 0x00000100
#define CHANSIZE_OVERRIDE (1 << 11)
#define NOOFGROUPS_SHIFT 12
#define NOOFGROUPS_MASK 0x00001000
#define MC_ARB_DRAM_TIMING 0x2774
#define MC_ARB_DRAM_TIMING2 0x2778
#define MC_ARB_BURST_TIME 0x2808
#define STATE0(x) ((x) << 0)
#define STATE0_MASK (0x1f << 0)
#define STATE0_SHIFT 0
#define STATE1(x) ((x) << 5)
#define STATE1_MASK (0x1f << 5)
#define STATE1_SHIFT 5
#define STATE2(x) ((x) << 10)
#define STATE2_MASK (0x1f << 10)
#define STATE2_SHIFT 10
#define STATE3(x) ((x) << 15)
#define STATE3_MASK (0x1f << 15)
#define STATE3_SHIFT 15
#define MC_SEQ_TRAIN_WAKEUP_CNTL 0x28e8
#define TRAIN_DONE_D0 (1 << 30)
#define TRAIN_DONE_D1 (1 << 31)
#define MC_SEQ_SUP_CNTL 0x28c8
#define RUN_MASK (1 << 0)
#define MC_SEQ_SUP_PGM 0x28cc
#define MC_PMG_AUTO_CMD 0x28d0
#define MC_IO_PAD_CNTL_D0 0x29d0
#define MEM_FALL_OUT_CMD (1 << 8)
#define MC_SEQ_RAS_TIMING 0x28a0
#define MC_SEQ_CAS_TIMING 0x28a4
#define MC_SEQ_MISC_TIMING 0x28a8
#define MC_SEQ_MISC_TIMING2 0x28ac
#define MC_SEQ_PMG_TIMING 0x28b0
#define MC_SEQ_RD_CTL_D0 0x28b4
#define MC_SEQ_RD_CTL_D1 0x28b8
#define MC_SEQ_WR_CTL_D0 0x28bc
#define MC_SEQ_WR_CTL_D1 0x28c0
#define MC_SEQ_MISC0 0x2a00
#define MC_SEQ_MISC0_VEN_ID_SHIFT 8
#define MC_SEQ_MISC0_VEN_ID_MASK 0x00000f00
#define MC_SEQ_MISC0_VEN_ID_VALUE 3
#define MC_SEQ_MISC0_REV_ID_SHIFT 12
#define MC_SEQ_MISC0_REV_ID_MASK 0x0000f000
#define MC_SEQ_MISC0_REV_ID_VALUE 1
#define MC_SEQ_MISC0_GDDR5_SHIFT 28
#define MC_SEQ_MISC0_GDDR5_MASK 0xf0000000
#define MC_SEQ_MISC0_GDDR5_VALUE 5
#define MC_SEQ_MISC1 0x2a04
#define MC_SEQ_RESERVE_M 0x2a08
#define MC_PMG_CMD_EMRS 0x2a0c
#define MC_SEQ_IO_DEBUG_INDEX 0x2a44
#define MC_SEQ_IO_DEBUG_DATA 0x2a48
#define MC_SEQ_MISC5 0x2a54
#define MC_SEQ_MISC6 0x2a58
#define MC_SEQ_MISC7 0x2a64
#define MC_SEQ_RAS_TIMING_LP 0x2a6c
#define MC_SEQ_CAS_TIMING_LP 0x2a70
#define MC_SEQ_MISC_TIMING_LP 0x2a74
#define MC_SEQ_MISC_TIMING2_LP 0x2a78
#define MC_SEQ_WR_CTL_D0_LP 0x2a7c
#define MC_SEQ_WR_CTL_D1_LP 0x2a80
#define MC_SEQ_PMG_CMD_EMRS_LP 0x2a84
#define MC_SEQ_PMG_CMD_MRS_LP 0x2a88
#define MC_PMG_CMD_MRS 0x2aac
#define MC_SEQ_RD_CTL_D0_LP 0x2b1c
#define MC_SEQ_RD_CTL_D1_LP 0x2b20
#define MC_PMG_CMD_MRS1 0x2b44
#define MC_SEQ_PMG_CMD_MRS1_LP 0x2b48
#define MC_SEQ_PMG_TIMING_LP 0x2b4c
#define MC_SEQ_WR_CTL_2 0x2b54
#define MC_SEQ_WR_CTL_2_LP 0x2b58
#define MC_PMG_CMD_MRS2 0x2b5c
#define MC_SEQ_PMG_CMD_MRS2_LP 0x2b60
#define MCLK_PWRMGT_CNTL 0x2ba0
# define DLL_SPEED(x) ((x) << 0)
# define DLL_SPEED_MASK (0x1f << 0)
# define DLL_READY (1 << 6)
# define MC_INT_CNTL (1 << 7)
# define MRDCK0_PDNB (1 << 8)
# define MRDCK1_PDNB (1 << 9)
# define MRDCK0_RESET (1 << 16)
# define MRDCK1_RESET (1 << 17)
# define DLL_READY_READ (1 << 24)
#define DLL_CNTL 0x2ba4
# define MRDCK0_BYPASS (1 << 24)
# define MRDCK1_BYPASS (1 << 25)
#define MPLL_CNTL_MODE 0x2bb0
# define MPLL_MCLK_SEL (1 << 11)
#define MPLL_FUNC_CNTL 0x2bb4
#define BWCTRL(x) ((x) << 20)
#define BWCTRL_MASK (0xff << 20)
#define MPLL_FUNC_CNTL_1 0x2bb8
#define VCO_MODE(x) ((x) << 0)
#define VCO_MODE_MASK (3 << 0)
#define CLKFRAC(x) ((x) << 4)
#define CLKFRAC_MASK (0xfff << 4)
#define CLKF(x) ((x) << 16)
#define CLKF_MASK (0xfff << 16)
#define MPLL_FUNC_CNTL_2 0x2bbc
#define MPLL_AD_FUNC_CNTL 0x2bc0
#define YCLK_POST_DIV(x) ((x) << 0)
#define YCLK_POST_DIV_MASK (7 << 0)
#define MPLL_DQ_FUNC_CNTL 0x2bc4
#define YCLK_SEL(x) ((x) << 4)
#define YCLK_SEL_MASK (1 << 4)
#define MPLL_SS1 0x2bcc
#define CLKV(x) ((x) << 0)
#define CLKV_MASK (0x3ffffff << 0)
#define MPLL_SS2 0x2bd0
#define CLKS(x) ((x) << 0)
#define CLKS_MASK (0xfff << 0)
#define HDP_HOST_PATH_CNTL 0x2C00
#define CLOCK_GATING_DIS (1 << 23)
#define HDP_NONSURFACE_BASE 0x2C04
#define HDP_NONSURFACE_INFO 0x2C08
#define HDP_NONSURFACE_SIZE 0x2C0C
#define HDP_ADDR_CONFIG 0x2F48
#define HDP_MISC_CNTL 0x2F4C
#define HDP_FLUSH_INVALIDATE_CACHE (1 << 0)
#define HDP_MEM_POWER_LS 0x2F50
#define HDP_LS_ENABLE (1 << 0)
#define ATC_MISC_CG 0x3350
#define IH_RB_CNTL 0x3e00
# define IH_RB_ENABLE (1 << 0)
# define IH_IB_SIZE(x) ((x) << 1) /* log2 */
# define IH_RB_FULL_DRAIN_ENABLE (1 << 6)
# define IH_WPTR_WRITEBACK_ENABLE (1 << 8)
# define IH_WPTR_WRITEBACK_TIMER(x) ((x) << 9) /* log2 */
# define IH_WPTR_OVERFLOW_ENABLE (1 << 16)
# define IH_WPTR_OVERFLOW_CLEAR (1 << 31)
#define IH_RB_BASE 0x3e04
#define IH_RB_RPTR 0x3e08
#define IH_RB_WPTR 0x3e0c
# define RB_OVERFLOW (1 << 0)
# define WPTR_OFFSET_MASK 0x3fffc
#define IH_RB_WPTR_ADDR_HI 0x3e10
#define IH_RB_WPTR_ADDR_LO 0x3e14
#define IH_CNTL 0x3e18
# define ENABLE_INTR (1 << 0)
# define IH_MC_SWAP(x) ((x) << 1)
# define IH_MC_SWAP_NONE 0
# define IH_MC_SWAP_16BIT 1
# define IH_MC_SWAP_32BIT 2
# define IH_MC_SWAP_64BIT 3
# define RPTR_REARM (1 << 4)
# define MC_WRREQ_CREDIT(x) ((x) << 15)
# define MC_WR_CLEAN_CNT(x) ((x) << 20)
# define MC_VMID(x) ((x) << 25)
#define CONFIG_MEMSIZE 0x5428
#define INTERRUPT_CNTL 0x5468
# define IH_DUMMY_RD_OVERRIDE (1 << 0)
# define IH_DUMMY_RD_EN (1 << 1)
# define IH_REQ_NONSNOOP_EN (1 << 3)
# define GEN_IH_INT_EN (1 << 8)
#define INTERRUPT_CNTL2 0x546c
#define HDP_MEM_COHERENCY_FLUSH_CNTL 0x5480
#define BIF_FB_EN 0x5490
#define FB_READ_EN (1 << 0)
#define FB_WRITE_EN (1 << 1)
#define HDP_REG_COHERENCY_FLUSH_CNTL 0x54A0
/* DCE6 ELD audio interface */
#define AZ_F0_CODEC_ENDPOINT_INDEX 0x5E00
# define AZ_ENDPOINT_REG_INDEX(x) (((x) & 0xff) << 0)
# define AZ_ENDPOINT_REG_WRITE_EN (1 << 8)
#define AZ_F0_CODEC_ENDPOINT_DATA 0x5E04
#define AZ_F0_CODEC_PIN_CONTROL_CHANNEL_SPEAKER 0x25
#define SPEAKER_ALLOCATION(x) (((x) & 0x7f) << 0)
#define SPEAKER_ALLOCATION_MASK (0x7f << 0)
#define SPEAKER_ALLOCATION_SHIFT 0
#define HDMI_CONNECTION (1 << 16)
#define DP_CONNECTION (1 << 17)
#define AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR0 0x28 /* LPCM */
#define AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR1 0x29 /* AC3 */
#define AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR2 0x2A /* MPEG1 */
#define AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR3 0x2B /* MP3 */
#define AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR4 0x2C /* MPEG2 */
#define AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR5 0x2D /* AAC */
#define AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR6 0x2E /* DTS */
#define AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR7 0x2F /* ATRAC */
#define AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR8 0x30 /* one bit audio - leave at 0 (default) */
#define AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR9 0x31 /* Dolby Digital */
#define AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR10 0x32 /* DTS-HD */
#define AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR11 0x33 /* MAT-MLP */
#define AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR12 0x34 /* DTS */
#define AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR13 0x35 /* WMA Pro */
# define MAX_CHANNELS(x) (((x) & 0x7) << 0)
/* max channels minus one. 7 = 8 channels */
# define SUPPORTED_FREQUENCIES(x) (((x) & 0xff) << 8)
# define DESCRIPTOR_BYTE_2(x) (((x) & 0xff) << 16)
# define SUPPORTED_FREQUENCIES_STEREO(x) (((x) & 0xff) << 24) /* LPCM only */
/* SUPPORTED_FREQUENCIES, SUPPORTED_FREQUENCIES_STEREO
* bit0 = 32 kHz
* bit1 = 44.1 kHz
* bit2 = 48 kHz
* bit3 = 88.2 kHz
* bit4 = 96 kHz
* bit5 = 176.4 kHz
* bit6 = 192 kHz
*/
#define AZ_F0_CODEC_PIN_CONTROL_RESPONSE_LIPSYNC 0x37
# define VIDEO_LIPSYNC(x) (((x) & 0xff) << 0)
# define AUDIO_LIPSYNC(x) (((x) & 0xff) << 8)
/* VIDEO_LIPSYNC, AUDIO_LIPSYNC
* 0 = invalid
* x = legal delay value
* 255 = sync not supported
*/
#define AZ_F0_CODEC_PIN_CONTROL_RESPONSE_HBR 0x38
# define HBR_CAPABLE (1 << 0) /* enabled by default */
#define AZ_F0_CODEC_PIN_CONTROL_SINK_INFO0 0x3a
# define MANUFACTURER_ID(x) (((x) & 0xffff) << 0)
# define PRODUCT_ID(x) (((x) & 0xffff) << 16)
#define AZ_F0_CODEC_PIN_CONTROL_SINK_INFO1 0x3b
# define SINK_DESCRIPTION_LEN(x) (((x) & 0xff) << 0)
#define AZ_F0_CODEC_PIN_CONTROL_SINK_INFO2 0x3c
# define PORT_ID0(x) (((x) & 0xffffffff) << 0)
#define AZ_F0_CODEC_PIN_CONTROL_SINK_INFO3 0x3d
# define PORT_ID1(x) (((x) & 0xffffffff) << 0)
#define AZ_F0_CODEC_PIN_CONTROL_SINK_INFO4 0x3e
# define DESCRIPTION0(x) (((x) & 0xff) << 0)
# define DESCRIPTION1(x) (((x) & 0xff) << 8)
# define DESCRIPTION2(x) (((x) & 0xff) << 16)
# define DESCRIPTION3(x) (((x) & 0xff) << 24)
#define AZ_F0_CODEC_PIN_CONTROL_SINK_INFO5 0x3f
# define DESCRIPTION4(x) (((x) & 0xff) << 0)
# define DESCRIPTION5(x) (((x) & 0xff) << 8)
# define DESCRIPTION6(x) (((x) & 0xff) << 16)
# define DESCRIPTION7(x) (((x) & 0xff) << 24)
#define AZ_F0_CODEC_PIN_CONTROL_SINK_INFO6 0x40
# define DESCRIPTION8(x) (((x) & 0xff) << 0)
# define DESCRIPTION9(x) (((x) & 0xff) << 8)
# define DESCRIPTION10(x) (((x) & 0xff) << 16)
# define DESCRIPTION11(x) (((x) & 0xff) << 24)
#define AZ_F0_CODEC_PIN_CONTROL_SINK_INFO7 0x41
# define DESCRIPTION12(x) (((x) & 0xff) << 0)
# define DESCRIPTION13(x) (((x) & 0xff) << 8)
# define DESCRIPTION14(x) (((x) & 0xff) << 16)
# define DESCRIPTION15(x) (((x) & 0xff) << 24)
#define AZ_F0_CODEC_PIN_CONTROL_SINK_INFO8 0x42
# define DESCRIPTION16(x) (((x) & 0xff) << 0)
# define DESCRIPTION17(x) (((x) & 0xff) << 8)
#define AZ_F0_CODEC_PIN_CONTROL_HOT_PLUG_CONTROL 0x54
# define AUDIO_ENABLED (1 << 31)
#define AZ_F0_CODEC_PIN_CONTROL_RESPONSE_CONFIGURATION_DEFAULT 0x56
#define PORT_CONNECTIVITY_MASK (3 << 30)
#define PORT_CONNECTIVITY_SHIFT 30
#define DC_LB_MEMORY_SPLIT 0x6b0c
#define DC_LB_MEMORY_CONFIG(x) ((x) << 20)
#define PRIORITY_A_CNT 0x6b18
#define PRIORITY_MARK_MASK 0x7fff
#define PRIORITY_OFF (1 << 16)
#define PRIORITY_ALWAYS_ON (1 << 20)
#define PRIORITY_B_CNT 0x6b1c
#define DPG_PIPE_ARBITRATION_CONTROL3 0x6cc8
# define LATENCY_WATERMARK_MASK(x) ((x) << 16)
#define DPG_PIPE_LATENCY_CONTROL 0x6ccc
# define LATENCY_LOW_WATERMARK(x) ((x) << 0)
# define LATENCY_HIGH_WATERMARK(x) ((x) << 16)
/* 0x6bb8, 0x77b8, 0x103b8, 0x10fb8, 0x11bb8, 0x127b8 */
#define VLINE_STATUS 0x6bb8
# define VLINE_OCCURRED (1 << 0)
# define VLINE_ACK (1 << 4)
# define VLINE_STAT (1 << 12)
# define VLINE_INTERRUPT (1 << 16)
# define VLINE_INTERRUPT_TYPE (1 << 17)
/* 0x6bbc, 0x77bc, 0x103bc, 0x10fbc, 0x11bbc, 0x127bc */
#define VBLANK_STATUS 0x6bbc
# define VBLANK_OCCURRED (1 << 0)
# define VBLANK_ACK (1 << 4)
# define VBLANK_STAT (1 << 12)
# define VBLANK_INTERRUPT (1 << 16)
# define VBLANK_INTERRUPT_TYPE (1 << 17)
/* 0x6b40, 0x7740, 0x10340, 0x10f40, 0x11b40, 0x12740 */
#define INT_MASK 0x6b40
# define VBLANK_INT_MASK (1 << 0)
# define VLINE_INT_MASK (1 << 4)
#define DISP_INTERRUPT_STATUS 0x60f4
# define LB_D1_VLINE_INTERRUPT (1 << 2)
# define LB_D1_VBLANK_INTERRUPT (1 << 3)
# define DC_HPD1_INTERRUPT (1 << 17)
# define DC_HPD1_RX_INTERRUPT (1 << 18)
# define DACA_AUTODETECT_INTERRUPT (1 << 22)
# define DACB_AUTODETECT_INTERRUPT (1 << 23)
# define DC_I2C_SW_DONE_INTERRUPT (1 << 24)
# define DC_I2C_HW_DONE_INTERRUPT (1 << 25)
#define DISP_INTERRUPT_STATUS_CONTINUE 0x60f8
# define LB_D2_VLINE_INTERRUPT (1 << 2)
# define LB_D2_VBLANK_INTERRUPT (1 << 3)
# define DC_HPD2_INTERRUPT (1 << 17)
# define DC_HPD2_RX_INTERRUPT (1 << 18)
# define DISP_TIMER_INTERRUPT (1 << 24)
#define DISP_INTERRUPT_STATUS_CONTINUE2 0x60fc
# define LB_D3_VLINE_INTERRUPT (1 << 2)
# define LB_D3_VBLANK_INTERRUPT (1 << 3)
# define DC_HPD3_INTERRUPT (1 << 17)
# define DC_HPD3_RX_INTERRUPT (1 << 18)
#define DISP_INTERRUPT_STATUS_CONTINUE3 0x6100
# define LB_D4_VLINE_INTERRUPT (1 << 2)
# define LB_D4_VBLANK_INTERRUPT (1 << 3)
# define DC_HPD4_INTERRUPT (1 << 17)
# define DC_HPD4_RX_INTERRUPT (1 << 18)
#define DISP_INTERRUPT_STATUS_CONTINUE4 0x614c
# define LB_D5_VLINE_INTERRUPT (1 << 2)
# define LB_D5_VBLANK_INTERRUPT (1 << 3)
# define DC_HPD5_INTERRUPT (1 << 17)
# define DC_HPD5_RX_INTERRUPT (1 << 18)
#define DISP_INTERRUPT_STATUS_CONTINUE5 0x6150
# define LB_D6_VLINE_INTERRUPT (1 << 2)
# define LB_D6_VBLANK_INTERRUPT (1 << 3)
# define DC_HPD6_INTERRUPT (1 << 17)
# define DC_HPD6_RX_INTERRUPT (1 << 18)
/* 0x6858, 0x7458, 0x10058, 0x10c58, 0x11858, 0x12458 */
#define GRPH_INT_STATUS 0x6858
# define GRPH_PFLIP_INT_OCCURRED (1 << 0)
# define GRPH_PFLIP_INT_CLEAR (1 << 8)
/* 0x685c, 0x745c, 0x1005c, 0x10c5c, 0x1185c, 0x1245c */
#define GRPH_INT_CONTROL 0x685c
# define GRPH_PFLIP_INT_MASK (1 << 0)
# define GRPH_PFLIP_INT_TYPE (1 << 8)
#define DAC_AUTODETECT_INT_CONTROL 0x67c8
#define DC_HPD1_INT_STATUS 0x601c
#define DC_HPD2_INT_STATUS 0x6028
#define DC_HPD3_INT_STATUS 0x6034
#define DC_HPD4_INT_STATUS 0x6040
#define DC_HPD5_INT_STATUS 0x604c
#define DC_HPD6_INT_STATUS 0x6058
# define DC_HPDx_INT_STATUS (1 << 0)
# define DC_HPDx_SENSE (1 << 1)
# define DC_HPDx_RX_INT_STATUS (1 << 8)
#define DC_HPD1_INT_CONTROL 0x6020
#define DC_HPD2_INT_CONTROL 0x602c
#define DC_HPD3_INT_CONTROL 0x6038
#define DC_HPD4_INT_CONTROL 0x6044
#define DC_HPD5_INT_CONTROL 0x6050
#define DC_HPD6_INT_CONTROL 0x605c
# define DC_HPDx_INT_ACK (1 << 0)
# define DC_HPDx_INT_POLARITY (1 << 8)
# define DC_HPDx_INT_EN (1 << 16)
# define DC_HPDx_RX_INT_ACK (1 << 20)
# define DC_HPDx_RX_INT_EN (1 << 24)
#define DC_HPD1_CONTROL 0x6024
#define DC_HPD2_CONTROL 0x6030
#define DC_HPD3_CONTROL 0x603c
#define DC_HPD4_CONTROL 0x6048
#define DC_HPD5_CONTROL 0x6054
#define DC_HPD6_CONTROL 0x6060
# define DC_HPDx_CONNECTION_TIMER(x) ((x) << 0)
# define DC_HPDx_RX_INT_TIMER(x) ((x) << 16)
# define DC_HPDx_EN (1 << 28)
#define DPG_PIPE_STUTTER_CONTROL 0x6cd4
# define STUTTER_ENABLE (1 << 0)
/* 0x6e98, 0x7a98, 0x10698, 0x11298, 0x11e98, 0x12a98 */
#define CRTC_STATUS_FRAME_COUNT 0x6e98
/* Audio clocks */
#define DCCG_AUDIO_DTO_SOURCE 0x05ac
# define DCCG_AUDIO_DTO0_SOURCE_SEL(x) ((x) << 0) /* crtc0 - crtc5 */
# define DCCG_AUDIO_DTO_SEL (1 << 4) /* 0=dto0 1=dto1 */
#define DCCG_AUDIO_DTO0_PHASE 0x05b0
#define DCCG_AUDIO_DTO0_MODULE 0x05b4
#define DCCG_AUDIO_DTO1_PHASE 0x05c0
#define DCCG_AUDIO_DTO1_MODULE 0x05c4
#define AFMT_AUDIO_SRC_CONTROL 0x713c
#define AFMT_AUDIO_SRC_SELECT(x) (((x) & 7) << 0)
/* AFMT_AUDIO_SRC_SELECT
* 0 = stream0
* 1 = stream1
* 2 = stream2
* 3 = stream3
* 4 = stream4
* 5 = stream5
*/
#define GRBM_CNTL 0x8000
#define GRBM_READ_TIMEOUT(x) ((x) << 0)
#define GRBM_STATUS2 0x8008
#define RLC_RQ_PENDING (1 << 0)
#define RLC_BUSY (1 << 8)
#define TC_BUSY (1 << 9)
#define GRBM_STATUS 0x8010
#define CMDFIFO_AVAIL_MASK 0x0000000F
#define RING2_RQ_PENDING (1 << 4)
#define SRBM_RQ_PENDING (1 << 5)
#define RING1_RQ_PENDING (1 << 6)
#define CF_RQ_PENDING (1 << 7)
#define PF_RQ_PENDING (1 << 8)
#define GDS_DMA_RQ_PENDING (1 << 9)
#define GRBM_EE_BUSY (1 << 10)
#define DB_CLEAN (1 << 12)
#define CB_CLEAN (1 << 13)
#define TA_BUSY (1 << 14)
#define GDS_BUSY (1 << 15)
#define VGT_BUSY (1 << 17)
#define IA_BUSY_NO_DMA (1 << 18)
#define IA_BUSY (1 << 19)
#define SX_BUSY (1 << 20)
#define SPI_BUSY (1 << 22)
#define BCI_BUSY (1 << 23)
#define SC_BUSY (1 << 24)
#define PA_BUSY (1 << 25)
#define DB_BUSY (1 << 26)
#define CP_COHERENCY_BUSY (1 << 28)
#define CP_BUSY (1 << 29)
#define CB_BUSY (1 << 30)
#define GUI_ACTIVE (1 << 31)
#define GRBM_STATUS_SE0 0x8014
#define GRBM_STATUS_SE1 0x8018
#define SE_DB_CLEAN (1 << 1)
#define SE_CB_CLEAN (1 << 2)
#define SE_BCI_BUSY (1 << 22)
#define SE_VGT_BUSY (1 << 23)
#define SE_PA_BUSY (1 << 24)
#define SE_TA_BUSY (1 << 25)
#define SE_SX_BUSY (1 << 26)
#define SE_SPI_BUSY (1 << 27)
#define SE_SC_BUSY (1 << 29)
#define SE_DB_BUSY (1 << 30)
#define SE_CB_BUSY (1 << 31)
#define GRBM_SOFT_RESET 0x8020
#define SOFT_RESET_CP (1 << 0)
#define SOFT_RESET_CB (1 << 1)
#define SOFT_RESET_RLC (1 << 2)
#define SOFT_RESET_DB (1 << 3)
#define SOFT_RESET_GDS (1 << 4)
#define SOFT_RESET_PA (1 << 5)
#define SOFT_RESET_SC (1 << 6)
#define SOFT_RESET_BCI (1 << 7)
#define SOFT_RESET_SPI (1 << 8)
#define SOFT_RESET_SX (1 << 10)
#define SOFT_RESET_TC (1 << 11)
#define SOFT_RESET_TA (1 << 12)
#define SOFT_RESET_VGT (1 << 14)
#define SOFT_RESET_IA (1 << 15)
#define GRBM_GFX_INDEX 0x802C
#define INSTANCE_INDEX(x) ((x) << 0)
#define SH_INDEX(x) ((x) << 8)
#define SE_INDEX(x) ((x) << 16)
#define SH_BROADCAST_WRITES (1 << 29)
#define INSTANCE_BROADCAST_WRITES (1 << 30)
#define SE_BROADCAST_WRITES (1 << 31)
#define GRBM_INT_CNTL 0x8060
# define RDERR_INT_ENABLE (1 << 0)
# define GUI_IDLE_INT_ENABLE (1 << 19)
#define CP_STRMOUT_CNTL 0x84FC
#define SCRATCH_REG0 0x8500
#define SCRATCH_REG1 0x8504
#define SCRATCH_REG2 0x8508
#define SCRATCH_REG3 0x850C
#define SCRATCH_REG4 0x8510
#define SCRATCH_REG5 0x8514
#define SCRATCH_REG6 0x8518
#define SCRATCH_REG7 0x851C
#define SCRATCH_UMSK 0x8540
#define SCRATCH_ADDR 0x8544
#define CP_SEM_WAIT_TIMER 0x85BC
#define CP_SEM_INCOMPLETE_TIMER_CNTL 0x85C8
#define CP_ME_CNTL 0x86D8
#define CP_CE_HALT (1 << 24)
#define CP_PFP_HALT (1 << 26)
#define CP_ME_HALT (1 << 28)
#define CP_COHER_CNTL2 0x85E8
#define CP_RB2_RPTR 0x86f8
#define CP_RB1_RPTR 0x86fc
#define CP_RB0_RPTR 0x8700
#define CP_RB_WPTR_DELAY 0x8704
#define CP_QUEUE_THRESHOLDS 0x8760
#define ROQ_IB1_START(x) ((x) << 0)
#define ROQ_IB2_START(x) ((x) << 8)
#define CP_MEQ_THRESHOLDS 0x8764
#define MEQ1_START(x) ((x) << 0)
#define MEQ2_START(x) ((x) << 8)
#define CP_PERFMON_CNTL 0x87FC
#define VGT_VTX_VECT_EJECT_REG 0x88B0
#define VGT_CACHE_INVALIDATION 0x88C4
#define CACHE_INVALIDATION(x) ((x) << 0)
#define VC_ONLY 0
#define TC_ONLY 1
#define VC_AND_TC 2
#define AUTO_INVLD_EN(x) ((x) << 6)
#define NO_AUTO 0
#define ES_AUTO 1
#define GS_AUTO 2
#define ES_AND_GS_AUTO 3
#define VGT_ESGS_RING_SIZE 0x88C8
#define VGT_GSVS_RING_SIZE 0x88CC
#define VGT_GS_VERTEX_REUSE 0x88D4
#define VGT_PRIMITIVE_TYPE 0x8958
#define VGT_INDEX_TYPE 0x895C
#define VGT_NUM_INDICES 0x8970
#define VGT_NUM_INSTANCES 0x8974
#define VGT_TF_RING_SIZE 0x8988
#define VGT_HS_OFFCHIP_PARAM 0x89B0
#define VGT_TF_MEMORY_BASE 0x89B8
#define CC_GC_SHADER_ARRAY_CONFIG 0x89bc
#define INACTIVE_CUS_MASK 0xFFFF0000
#define INACTIVE_CUS_SHIFT 16
#define GC_USER_SHADER_ARRAY_CONFIG 0x89c0
#define PA_CL_ENHANCE 0x8A14
#define CLIP_VTX_REORDER_ENA (1 << 0)
#define NUM_CLIP_SEQ(x) ((x) << 1)
#define PA_SU_LINE_STIPPLE_VALUE 0x8A60
#define PA_SC_LINE_STIPPLE_STATE 0x8B10
#define PA_SC_FORCE_EOV_MAX_CNTS 0x8B24
#define FORCE_EOV_MAX_CLK_CNT(x) ((x) << 0)
#define FORCE_EOV_MAX_REZ_CNT(x) ((x) << 16)
#define PA_SC_FIFO_SIZE 0x8BCC
#define SC_FRONTEND_PRIM_FIFO_SIZE(x) ((x) << 0)
#define SC_BACKEND_PRIM_FIFO_SIZE(x) ((x) << 6)
#define SC_HIZ_TILE_FIFO_SIZE(x) ((x) << 15)
#define SC_EARLYZ_TILE_FIFO_SIZE(x) ((x) << 23)
#define PA_SC_ENHANCE 0x8BF0
#define SQ_CONFIG 0x8C00
#define SQC_CACHES 0x8C08
#define SQ_POWER_THROTTLE 0x8e58
#define MIN_POWER(x) ((x) << 0)
#define MIN_POWER_MASK (0x3fff << 0)
#define MIN_POWER_SHIFT 0
#define MAX_POWER(x) ((x) << 16)
#define MAX_POWER_MASK (0x3fff << 16)
#define MAX_POWER_SHIFT 0
#define SQ_POWER_THROTTLE2 0x8e5c
#define MAX_POWER_DELTA(x) ((x) << 0)
#define MAX_POWER_DELTA_MASK (0x3fff << 0)
#define MAX_POWER_DELTA_SHIFT 0
#define STI_SIZE(x) ((x) << 16)
#define STI_SIZE_MASK (0x3ff << 16)
#define STI_SIZE_SHIFT 16
#define LTI_RATIO(x) ((x) << 27)
#define LTI_RATIO_MASK (0xf << 27)
#define LTI_RATIO_SHIFT 27
#define SX_DEBUG_1 0x9060
#define SPI_STATIC_THREAD_MGMT_1 0x90E0
#define SPI_STATIC_THREAD_MGMT_2 0x90E4
#define SPI_STATIC_THREAD_MGMT_3 0x90E8
#define SPI_PS_MAX_WAVE_ID 0x90EC
#define SPI_CONFIG_CNTL 0x9100
#define SPI_CONFIG_CNTL_1 0x913C
#define VTX_DONE_DELAY(x) ((x) << 0)
#define INTERP_ONE_PRIM_PER_ROW (1 << 4)
#define CGTS_TCC_DISABLE 0x9148
#define CGTS_USER_TCC_DISABLE 0x914C
#define TCC_DISABLE_MASK 0xFFFF0000
#define TCC_DISABLE_SHIFT 16
#define CGTS_SM_CTRL_REG 0x9150
#define OVERRIDE (1 << 21)
#define LS_OVERRIDE (1 << 22)
#define SPI_LB_CU_MASK 0x9354
#define TA_CNTL_AUX 0x9508
#define CC_RB_BACKEND_DISABLE 0x98F4
#define BACKEND_DISABLE(x) ((x) << 16)
#define GB_ADDR_CONFIG 0x98F8
#define NUM_PIPES(x) ((x) << 0)
#define NUM_PIPES_MASK 0x00000007
#define NUM_PIPES_SHIFT 0
#define PIPE_INTERLEAVE_SIZE(x) ((x) << 4)
#define PIPE_INTERLEAVE_SIZE_MASK 0x00000070
#define PIPE_INTERLEAVE_SIZE_SHIFT 4
#define NUM_SHADER_ENGINES(x) ((x) << 12)
#define NUM_SHADER_ENGINES_MASK 0x00003000
#define NUM_SHADER_ENGINES_SHIFT 12
#define SHADER_ENGINE_TILE_SIZE(x) ((x) << 16)
#define SHADER_ENGINE_TILE_SIZE_MASK 0x00070000
#define SHADER_ENGINE_TILE_SIZE_SHIFT 16
#define NUM_GPUS(x) ((x) << 20)
#define NUM_GPUS_MASK 0x00700000
#define NUM_GPUS_SHIFT 20
#define MULTI_GPU_TILE_SIZE(x) ((x) << 24)
#define MULTI_GPU_TILE_SIZE_MASK 0x03000000
#define MULTI_GPU_TILE_SIZE_SHIFT 24
#define ROW_SIZE(x) ((x) << 28)
#define ROW_SIZE_MASK 0x30000000
#define ROW_SIZE_SHIFT 28
#define GB_TILE_MODE0 0x9910
# define MICRO_TILE_MODE(x) ((x) << 0)
# define ADDR_SURF_DISPLAY_MICRO_TILING 0
# define ADDR_SURF_THIN_MICRO_TILING 1
# define ADDR_SURF_DEPTH_MICRO_TILING 2
# define ARRAY_MODE(x) ((x) << 2)
# define ARRAY_LINEAR_GENERAL 0
# define ARRAY_LINEAR_ALIGNED 1
# define ARRAY_1D_TILED_THIN1 2
# define ARRAY_2D_TILED_THIN1 4
# define PIPE_CONFIG(x) ((x) << 6)
# define ADDR_SURF_P2 0
# define ADDR_SURF_P4_8x16 4
# define ADDR_SURF_P4_16x16 5
# define ADDR_SURF_P4_16x32 6
# define ADDR_SURF_P4_32x32 7
# define ADDR_SURF_P8_16x16_8x16 8
# define ADDR_SURF_P8_16x32_8x16 9
# define ADDR_SURF_P8_32x32_8x16 10
# define ADDR_SURF_P8_16x32_16x16 11
# define ADDR_SURF_P8_32x32_16x16 12
# define ADDR_SURF_P8_32x32_16x32 13
# define ADDR_SURF_P8_32x64_32x32 14
# define TILE_SPLIT(x) ((x) << 11)
# define ADDR_SURF_TILE_SPLIT_64B 0
# define ADDR_SURF_TILE_SPLIT_128B 1
# define ADDR_SURF_TILE_SPLIT_256B 2
# define ADDR_SURF_TILE_SPLIT_512B 3
# define ADDR_SURF_TILE_SPLIT_1KB 4
# define ADDR_SURF_TILE_SPLIT_2KB 5
# define ADDR_SURF_TILE_SPLIT_4KB 6
# define BANK_WIDTH(x) ((x) << 14)
# define ADDR_SURF_BANK_WIDTH_1 0
# define ADDR_SURF_BANK_WIDTH_2 1
# define ADDR_SURF_BANK_WIDTH_4 2
# define ADDR_SURF_BANK_WIDTH_8 3
# define BANK_HEIGHT(x) ((x) << 16)
# define ADDR_SURF_BANK_HEIGHT_1 0
# define ADDR_SURF_BANK_HEIGHT_2 1
# define ADDR_SURF_BANK_HEIGHT_4 2
# define ADDR_SURF_BANK_HEIGHT_8 3
# define MACRO_TILE_ASPECT(x) ((x) << 18)
# define ADDR_SURF_MACRO_ASPECT_1 0
# define ADDR_SURF_MACRO_ASPECT_2 1
# define ADDR_SURF_MACRO_ASPECT_4 2
# define ADDR_SURF_MACRO_ASPECT_8 3
# define NUM_BANKS(x) ((x) << 20)
# define ADDR_SURF_2_BANK 0
# define ADDR_SURF_4_BANK 1
# define ADDR_SURF_8_BANK 2
# define ADDR_SURF_16_BANK 3
#define CB_PERFCOUNTER0_SELECT0 0x9a20
#define CB_PERFCOUNTER0_SELECT1 0x9a24
#define CB_PERFCOUNTER1_SELECT0 0x9a28
#define CB_PERFCOUNTER1_SELECT1 0x9a2c
#define CB_PERFCOUNTER2_SELECT0 0x9a30
#define CB_PERFCOUNTER2_SELECT1 0x9a34
#define CB_PERFCOUNTER3_SELECT0 0x9a38
#define CB_PERFCOUNTER3_SELECT1 0x9a3c
#define CB_CGTT_SCLK_CTRL 0x9a60
#define GC_USER_RB_BACKEND_DISABLE 0x9B7C
#define BACKEND_DISABLE_MASK 0x00FF0000
#define BACKEND_DISABLE_SHIFT 16
#define TCP_CHAN_STEER_LO 0xac0c
#define TCP_CHAN_STEER_HI 0xac10
#define CP_RB0_BASE 0xC100
#define CP_RB0_CNTL 0xC104
#define RB_BUFSZ(x) ((x) << 0)
#define RB_BLKSZ(x) ((x) << 8)
#define BUF_SWAP_32BIT (2 << 16)
#define RB_NO_UPDATE (1 << 27)
#define RB_RPTR_WR_ENA (1 << 31)
#define CP_RB0_RPTR_ADDR 0xC10C
#define CP_RB0_RPTR_ADDR_HI 0xC110
#define CP_RB0_WPTR 0xC114
#define CP_PFP_UCODE_ADDR 0xC150
#define CP_PFP_UCODE_DATA 0xC154
#define CP_ME_RAM_RADDR 0xC158
#define CP_ME_RAM_WADDR 0xC15C
#define CP_ME_RAM_DATA 0xC160
#define CP_CE_UCODE_ADDR 0xC168
#define CP_CE_UCODE_DATA 0xC16C
#define CP_RB1_BASE 0xC180
#define CP_RB1_CNTL 0xC184
#define CP_RB1_RPTR_ADDR 0xC188
#define CP_RB1_RPTR_ADDR_HI 0xC18C
#define CP_RB1_WPTR 0xC190
#define CP_RB2_BASE 0xC194
#define CP_RB2_CNTL 0xC198
#define CP_RB2_RPTR_ADDR 0xC19C
#define CP_RB2_RPTR_ADDR_HI 0xC1A0
#define CP_RB2_WPTR 0xC1A4
#define CP_INT_CNTL_RING0 0xC1A8
#define CP_INT_CNTL_RING1 0xC1AC
#define CP_INT_CNTL_RING2 0xC1B0
# define CNTX_BUSY_INT_ENABLE (1 << 19)
# define CNTX_EMPTY_INT_ENABLE (1 << 20)
# define WAIT_MEM_SEM_INT_ENABLE (1 << 21)
# define TIME_STAMP_INT_ENABLE (1 << 26)
# define CP_RINGID2_INT_ENABLE (1 << 29)
# define CP_RINGID1_INT_ENABLE (1 << 30)
# define CP_RINGID0_INT_ENABLE (1 << 31)
#define CP_INT_STATUS_RING0 0xC1B4
#define CP_INT_STATUS_RING1 0xC1B8
#define CP_INT_STATUS_RING2 0xC1BC
# define WAIT_MEM_SEM_INT_STAT (1 << 21)
# define TIME_STAMP_INT_STAT (1 << 26)
# define CP_RINGID2_INT_STAT (1 << 29)
# define CP_RINGID1_INT_STAT (1 << 30)
# define CP_RINGID0_INT_STAT (1 << 31)
#define CP_MEM_SLP_CNTL 0xC1E4
# define CP_MEM_LS_EN (1 << 0)
#define CP_DEBUG 0xC1FC
#define RLC_CNTL 0xC300
# define RLC_ENABLE (1 << 0)
#define RLC_RL_BASE 0xC304
#define RLC_RL_SIZE 0xC308
#define RLC_LB_CNTL 0xC30C
# define LOAD_BALANCE_ENABLE (1 << 0)
#define RLC_SAVE_AND_RESTORE_BASE 0xC310
#define RLC_LB_CNTR_MAX 0xC314
#define RLC_LB_CNTR_INIT 0xC318
#define RLC_CLEAR_STATE_RESTORE_BASE 0xC320
#define RLC_UCODE_ADDR 0xC32C
#define RLC_UCODE_DATA 0xC330
#define RLC_GPU_CLOCK_COUNT_LSB 0xC338
#define RLC_GPU_CLOCK_COUNT_MSB 0xC33C
#define RLC_CAPTURE_GPU_CLOCK_COUNT 0xC340
#define RLC_MC_CNTL 0xC344
#define RLC_UCODE_CNTL 0xC348
#define RLC_STAT 0xC34C
# define RLC_BUSY_STATUS (1 << 0)
# define GFX_POWER_STATUS (1 << 1)
# define GFX_CLOCK_STATUS (1 << 2)
# define GFX_LS_STATUS (1 << 3)
#define RLC_PG_CNTL 0xC35C
# define GFX_PG_ENABLE (1 << 0)
# define GFX_PG_SRC (1 << 1)
#define RLC_CGTT_MGCG_OVERRIDE 0xC400
#define RLC_CGCG_CGLS_CTRL 0xC404
# define CGCG_EN (1 << 0)
# define CGLS_EN (1 << 1)
#define RLC_TTOP_D 0xC414
# define RLC_PUD(x) ((x) << 0)
# define RLC_PUD_MASK (0xff << 0)
# define RLC_PDD(x) ((x) << 8)
# define RLC_PDD_MASK (0xff << 8)
# define RLC_TTPD(x) ((x) << 16)
# define RLC_TTPD_MASK (0xff << 16)
# define RLC_MSD(x) ((x) << 24)
# define RLC_MSD_MASK (0xff << 24)
#define RLC_LB_INIT_CU_MASK 0xC41C
#define RLC_PG_AO_CU_MASK 0xC42C
#define RLC_MAX_PG_CU 0xC430
# define MAX_PU_CU(x) ((x) << 0)
# define MAX_PU_CU_MASK (0xff << 0)
#define RLC_AUTO_PG_CTRL 0xC434
# define AUTO_PG_EN (1 << 0)
# define GRBM_REG_SGIT(x) ((x) << 3)
# define GRBM_REG_SGIT_MASK (0xffff << 3)
# define PG_AFTER_GRBM_REG_ST(x) ((x) << 19)
# define PG_AFTER_GRBM_REG_ST_MASK (0x1fff << 19)
#define RLC_SERDES_WR_MASTER_MASK_0 0xC454
#define RLC_SERDES_WR_MASTER_MASK_1 0xC458
#define RLC_SERDES_WR_CTRL 0xC45C
#define RLC_SERDES_MASTER_BUSY_0 0xC464
#define RLC_SERDES_MASTER_BUSY_1 0xC468
#define RLC_GCPM_GENERAL_3 0xC478
#define DB_RENDER_CONTROL 0x28000
#define DB_DEPTH_INFO 0x2803c
#define PA_SC_RASTER_CONFIG 0x28350
# define RASTER_CONFIG_RB_MAP_0 0
# define RASTER_CONFIG_RB_MAP_1 1
# define RASTER_CONFIG_RB_MAP_2 2
# define RASTER_CONFIG_RB_MAP_3 3
#define VGT_EVENT_INITIATOR 0x28a90
# define SAMPLE_STREAMOUTSTATS1 (1 << 0)
# define SAMPLE_STREAMOUTSTATS2 (2 << 0)
# define SAMPLE_STREAMOUTSTATS3 (3 << 0)
# define CACHE_FLUSH_TS (4 << 0)
# define CACHE_FLUSH (6 << 0)
# define CS_PARTIAL_FLUSH (7 << 0)
# define VGT_STREAMOUT_RESET (10 << 0)
# define END_OF_PIPE_INCR_DE (11 << 0)
# define END_OF_PIPE_IB_END (12 << 0)
# define RST_PIX_CNT (13 << 0)
# define VS_PARTIAL_FLUSH (15 << 0)
# define PS_PARTIAL_FLUSH (16 << 0)
# define CACHE_FLUSH_AND_INV_TS_EVENT (20 << 0)
# define ZPASS_DONE (21 << 0)
# define CACHE_FLUSH_AND_INV_EVENT (22 << 0)
# define PERFCOUNTER_START (23 << 0)
# define PERFCOUNTER_STOP (24 << 0)
# define PIPELINESTAT_START (25 << 0)
# define PIPELINESTAT_STOP (26 << 0)
# define PERFCOUNTER_SAMPLE (27 << 0)
# define SAMPLE_PIPELINESTAT (30 << 0)
# define SAMPLE_STREAMOUTSTATS (32 << 0)
# define RESET_VTX_CNT (33 << 0)
# define VGT_FLUSH (36 << 0)
# define BOTTOM_OF_PIPE_TS (40 << 0)
# define DB_CACHE_FLUSH_AND_INV (42 << 0)
# define FLUSH_AND_INV_DB_DATA_TS (43 << 0)
# define FLUSH_AND_INV_DB_META (44 << 0)
# define FLUSH_AND_INV_CB_DATA_TS (45 << 0)
# define FLUSH_AND_INV_CB_META (46 << 0)
# define CS_DONE (47 << 0)
# define PS_DONE (48 << 0)
# define FLUSH_AND_INV_CB_PIXEL_DATA (49 << 0)
# define THREAD_TRACE_START (51 << 0)
# define THREAD_TRACE_STOP (52 << 0)
# define THREAD_TRACE_FLUSH (54 << 0)
# define THREAD_TRACE_FINISH (55 << 0)
/* PIF PHY0 registers idx/data 0x8/0xc */
#define PB0_PIF_CNTL 0x10
# define LS2_EXIT_TIME(x) ((x) << 17)
# define LS2_EXIT_TIME_MASK (0x7 << 17)
# define LS2_EXIT_TIME_SHIFT 17
#define PB0_PIF_PAIRING 0x11
# define MULTI_PIF (1 << 25)
#define PB0_PIF_PWRDOWN_0 0x12
# define PLL_POWER_STATE_IN_TXS2_0(x) ((x) << 7)
# define PLL_POWER_STATE_IN_TXS2_0_MASK (0x7 << 7)
# define PLL_POWER_STATE_IN_TXS2_0_SHIFT 7
# define PLL_POWER_STATE_IN_OFF_0(x) ((x) << 10)
# define PLL_POWER_STATE_IN_OFF_0_MASK (0x7 << 10)
# define PLL_POWER_STATE_IN_OFF_0_SHIFT 10
# define PLL_RAMP_UP_TIME_0(x) ((x) << 24)
# define PLL_RAMP_UP_TIME_0_MASK (0x7 << 24)
# define PLL_RAMP_UP_TIME_0_SHIFT 24
#define PB0_PIF_PWRDOWN_1 0x13
# define PLL_POWER_STATE_IN_TXS2_1(x) ((x) << 7)
# define PLL_POWER_STATE_IN_TXS2_1_MASK (0x7 << 7)
# define PLL_POWER_STATE_IN_TXS2_1_SHIFT 7
# define PLL_POWER_STATE_IN_OFF_1(x) ((x) << 10)
# define PLL_POWER_STATE_IN_OFF_1_MASK (0x7 << 10)
# define PLL_POWER_STATE_IN_OFF_1_SHIFT 10
# define PLL_RAMP_UP_TIME_1(x) ((x) << 24)
# define PLL_RAMP_UP_TIME_1_MASK (0x7 << 24)
# define PLL_RAMP_UP_TIME_1_SHIFT 24
#define PB0_PIF_PWRDOWN_2 0x17
# define PLL_POWER_STATE_IN_TXS2_2(x) ((x) << 7)
# define PLL_POWER_STATE_IN_TXS2_2_MASK (0x7 << 7)
# define PLL_POWER_STATE_IN_TXS2_2_SHIFT 7
# define PLL_POWER_STATE_IN_OFF_2(x) ((x) << 10)
# define PLL_POWER_STATE_IN_OFF_2_MASK (0x7 << 10)
# define PLL_POWER_STATE_IN_OFF_2_SHIFT 10
# define PLL_RAMP_UP_TIME_2(x) ((x) << 24)
# define PLL_RAMP_UP_TIME_2_MASK (0x7 << 24)
# define PLL_RAMP_UP_TIME_2_SHIFT 24
#define PB0_PIF_PWRDOWN_3 0x18
# define PLL_POWER_STATE_IN_TXS2_3(x) ((x) << 7)
# define PLL_POWER_STATE_IN_TXS2_3_MASK (0x7 << 7)
# define PLL_POWER_STATE_IN_TXS2_3_SHIFT 7
# define PLL_POWER_STATE_IN_OFF_3(x) ((x) << 10)
# define PLL_POWER_STATE_IN_OFF_3_MASK (0x7 << 10)
# define PLL_POWER_STATE_IN_OFF_3_SHIFT 10
# define PLL_RAMP_UP_TIME_3(x) ((x) << 24)
# define PLL_RAMP_UP_TIME_3_MASK (0x7 << 24)
# define PLL_RAMP_UP_TIME_3_SHIFT 24
/* PIF PHY1 registers idx/data 0x10/0x14 */
#define PB1_PIF_CNTL 0x10
#define PB1_PIF_PAIRING 0x11
#define PB1_PIF_PWRDOWN_0 0x12
#define PB1_PIF_PWRDOWN_1 0x13
#define PB1_PIF_PWRDOWN_2 0x17
#define PB1_PIF_PWRDOWN_3 0x18
/* PCIE registers idx/data 0x30/0x34 */
#define PCIE_CNTL2 0x1c /* PCIE */
# define SLV_MEM_LS_EN (1 << 16)
# define SLV_MEM_AGGRESSIVE_LS_EN (1 << 17)
# define MST_MEM_LS_EN (1 << 18)
# define REPLAY_MEM_LS_EN (1 << 19)
#define PCIE_LC_STATUS1 0x28 /* PCIE */
# define LC_REVERSE_RCVR (1 << 0)
# define LC_REVERSE_XMIT (1 << 1)
# define LC_OPERATING_LINK_WIDTH_MASK (0x7 << 2)
# define LC_OPERATING_LINK_WIDTH_SHIFT 2
# define LC_DETECTED_LINK_WIDTH_MASK (0x7 << 5)
# define LC_DETECTED_LINK_WIDTH_SHIFT 5
#define PCIE_P_CNTL 0x40 /* PCIE */
# define P_IGNORE_EDB_ERR (1 << 6)
/* PCIE PORT registers idx/data 0x38/0x3c */
#define PCIE_LC_CNTL 0xa0
# define LC_L0S_INACTIVITY(x) ((x) << 8)
# define LC_L0S_INACTIVITY_MASK (0xf << 8)
# define LC_L0S_INACTIVITY_SHIFT 8
# define LC_L1_INACTIVITY(x) ((x) << 12)
# define LC_L1_INACTIVITY_MASK (0xf << 12)
# define LC_L1_INACTIVITY_SHIFT 12
# define LC_PMI_TO_L1_DIS (1 << 16)
# define LC_ASPM_TO_L1_DIS (1 << 24)
#define PCIE_LC_LINK_WIDTH_CNTL 0xa2 /* PCIE_P */
# define LC_LINK_WIDTH_SHIFT 0
# define LC_LINK_WIDTH_MASK 0x7
# define LC_LINK_WIDTH_X0 0
# define LC_LINK_WIDTH_X1 1
# define LC_LINK_WIDTH_X2 2
# define LC_LINK_WIDTH_X4 3
# define LC_LINK_WIDTH_X8 4
# define LC_LINK_WIDTH_X16 6
# define LC_LINK_WIDTH_RD_SHIFT 4
# define LC_LINK_WIDTH_RD_MASK 0x70
# define LC_RECONFIG_ARC_MISSING_ESCAPE (1 << 7)
# define LC_RECONFIG_NOW (1 << 8)
# define LC_RENEGOTIATION_SUPPORT (1 << 9)
# define LC_RENEGOTIATE_EN (1 << 10)
# define LC_SHORT_RECONFIG_EN (1 << 11)
# define LC_UPCONFIGURE_SUPPORT (1 << 12)
# define LC_UPCONFIGURE_DIS (1 << 13)
# define LC_DYN_LANES_PWR_STATE(x) ((x) << 21)
# define LC_DYN_LANES_PWR_STATE_MASK (0x3 << 21)
# define LC_DYN_LANES_PWR_STATE_SHIFT 21
#define PCIE_LC_N_FTS_CNTL 0xa3 /* PCIE_P */
# define LC_XMIT_N_FTS(x) ((x) << 0)
# define LC_XMIT_N_FTS_MASK (0xff << 0)
# define LC_XMIT_N_FTS_SHIFT 0
# define LC_XMIT_N_FTS_OVERRIDE_EN (1 << 8)
# define LC_N_FTS_MASK (0xff << 24)
#define PCIE_LC_SPEED_CNTL 0xa4 /* PCIE_P */
# define LC_GEN2_EN_STRAP (1 << 0)
# define LC_GEN3_EN_STRAP (1 << 1)
# define LC_TARGET_LINK_SPEED_OVERRIDE_EN (1 << 2)
# define LC_TARGET_LINK_SPEED_OVERRIDE_MASK (0x3 << 3)
# define LC_TARGET_LINK_SPEED_OVERRIDE_SHIFT 3
# define LC_FORCE_EN_SW_SPEED_CHANGE (1 << 5)
# define LC_FORCE_DIS_SW_SPEED_CHANGE (1 << 6)
# define LC_FORCE_EN_HW_SPEED_CHANGE (1 << 7)
# define LC_FORCE_DIS_HW_SPEED_CHANGE (1 << 8)
# define LC_INITIATE_LINK_SPEED_CHANGE (1 << 9)
# define LC_SPEED_CHANGE_ATTEMPTS_ALLOWED_MASK (0x3 << 10)
# define LC_SPEED_CHANGE_ATTEMPTS_ALLOWED_SHIFT 10
# define LC_CURRENT_DATA_RATE_MASK (0x3 << 13) /* 0/1/2 = gen1/2/3 */
# define LC_CURRENT_DATA_RATE_SHIFT 13
# define LC_CLR_FAILED_SPD_CHANGE_CNT (1 << 16)
# define LC_OTHER_SIDE_EVER_SENT_GEN2 (1 << 18)
# define LC_OTHER_SIDE_SUPPORTS_GEN2 (1 << 19)
# define LC_OTHER_SIDE_EVER_SENT_GEN3 (1 << 20)
# define LC_OTHER_SIDE_SUPPORTS_GEN3 (1 << 21)
#define PCIE_LC_CNTL2 0xb1
# define LC_ALLOW_PDWN_IN_L1 (1 << 17)
# define LC_ALLOW_PDWN_IN_L23 (1 << 18)
#define PCIE_LC_CNTL3 0xb5 /* PCIE_P */
# define LC_GO_TO_RECOVERY (1 << 30)
#define PCIE_LC_CNTL4 0xb6 /* PCIE_P */
# define LC_REDO_EQ (1 << 5)
# define LC_SET_QUIESCE (1 << 13)
/*
* UVD
*/
#define UVD_UDEC_ADDR_CONFIG 0xEF4C
#define UVD_UDEC_DB_ADDR_CONFIG 0xEF50
#define UVD_UDEC_DBW_ADDR_CONFIG 0xEF54
#define UVD_RBC_RB_RPTR 0xF690
#define UVD_RBC_RB_WPTR 0xF694
#define UVD_STATUS 0xf6bc
#define UVD_CGC_CTRL 0xF4B0
# define DCM (1 << 0)
# define CG_DT(x) ((x) << 2)
# define CG_DT_MASK (0xf << 2)
# define CLK_OD(x) ((x) << 6)
# define CLK_OD_MASK (0x1f << 6)
/* UVD CTX indirect */
#define UVD_CGC_MEM_CTRL 0xC0
#define UVD_CGC_CTRL2 0xC1
# define DYN_OR_EN (1 << 0)
# define DYN_RR_EN (1 << 1)
# define G_DIV_ID(x) ((x) << 2)
# define G_DIV_ID_MASK (0x7 << 2)
/*
* PM4
*/
#define PACKET0(reg, n) ((RADEON_PACKET_TYPE0 << 30) | \
(((reg) >> 2) & 0xFFFF) | \
((n) & 0x3FFF) << 16)
#define CP_PACKET2 0x80000000
#define PACKET2_PAD_SHIFT 0
#define PACKET2_PAD_MASK (0x3fffffff << 0)
#define PACKET2(v) (CP_PACKET2 | REG_SET(PACKET2_PAD, (v)))
#define PACKET3(op, n) ((RADEON_PACKET_TYPE3 << 30) | \
(((op) & 0xFF) << 8) | \
((n) & 0x3FFF) << 16)
#define PACKET3_COMPUTE(op, n) (PACKET3(op, n) | 1 << 1)
/* Packet 3 types */
#define PACKET3_NOP 0x10
#define PACKET3_SET_BASE 0x11
#define PACKET3_BASE_INDEX(x) ((x) << 0)
#define GDS_PARTITION_BASE 2
#define CE_PARTITION_BASE 3
#define PACKET3_CLEAR_STATE 0x12
#define PACKET3_INDEX_BUFFER_SIZE 0x13
#define PACKET3_DISPATCH_DIRECT 0x15
#define PACKET3_DISPATCH_INDIRECT 0x16
#define PACKET3_ALLOC_GDS 0x1B
#define PACKET3_WRITE_GDS_RAM 0x1C
#define PACKET3_ATOMIC_GDS 0x1D
#define PACKET3_ATOMIC 0x1E
#define PACKET3_OCCLUSION_QUERY 0x1F
#define PACKET3_SET_PREDICATION 0x20
#define PACKET3_REG_RMW 0x21
#define PACKET3_COND_EXEC 0x22
#define PACKET3_PRED_EXEC 0x23
#define PACKET3_DRAW_INDIRECT 0x24
#define PACKET3_DRAW_INDEX_INDIRECT 0x25
#define PACKET3_INDEX_BASE 0x26
#define PACKET3_DRAW_INDEX_2 0x27
#define PACKET3_CONTEXT_CONTROL 0x28
#define PACKET3_INDEX_TYPE 0x2A
#define PACKET3_DRAW_INDIRECT_MULTI 0x2C
#define PACKET3_DRAW_INDEX_AUTO 0x2D
#define PACKET3_DRAW_INDEX_IMMD 0x2E
#define PACKET3_NUM_INSTANCES 0x2F
#define PACKET3_DRAW_INDEX_MULTI_AUTO 0x30
#define PACKET3_INDIRECT_BUFFER_CONST 0x31
#define PACKET3_INDIRECT_BUFFER 0x32
#define PACKET3_STRMOUT_BUFFER_UPDATE 0x34
#define PACKET3_DRAW_INDEX_OFFSET_2 0x35
#define PACKET3_DRAW_INDEX_MULTI_ELEMENT 0x36
#define PACKET3_WRITE_DATA 0x37
#define WRITE_DATA_DST_SEL(x) ((x) << 8)
/* 0 - register
* 1 - memory (sync - via GRBM)
* 2 - tc/l2
* 3 - gds
* 4 - reserved
* 5 - memory (async - direct)
*/
#define WR_ONE_ADDR (1 << 16)
#define WR_CONFIRM (1 << 20)
#define WRITE_DATA_ENGINE_SEL(x) ((x) << 30)
/* 0 - me
* 1 - pfp
* 2 - ce
*/
#define PACKET3_DRAW_INDEX_INDIRECT_MULTI 0x38
#define PACKET3_MEM_SEMAPHORE 0x39
#define PACKET3_MPEG_INDEX 0x3A
#define PACKET3_COPY_DW 0x3B
#define PACKET3_WAIT_REG_MEM 0x3C
#define WAIT_REG_MEM_FUNCTION(x) ((x) << 0)
/* 0 - always
* 1 - <
* 2 - <=
* 3 - ==
* 4 - !=
* 5 - >=
* 6 - >
*/
#define WAIT_REG_MEM_MEM_SPACE(x) ((x) << 4)
/* 0 - reg
* 1 - mem
*/
#define WAIT_REG_MEM_ENGINE(x) ((x) << 8)
/* 0 - me
* 1 - pfp
*/
#define PACKET3_MEM_WRITE 0x3D
#define PACKET3_COPY_DATA 0x40
#define PACKET3_CP_DMA 0x41
/* 1. header
* 2. SRC_ADDR_LO or DATA [31:0]
* 3. CP_SYNC [31] | SRC_SEL [30:29] | ENGINE [27] | DST_SEL [21:20] |
* SRC_ADDR_HI [7:0]
* 4. DST_ADDR_LO [31:0]
* 5. DST_ADDR_HI [7:0]
* 6. COMMAND [30:21] | BYTE_COUNT [20:0]
*/
# define PACKET3_CP_DMA_DST_SEL(x) ((x) << 20)
/* 0 - DST_ADDR
* 1 - GDS
*/
# define PACKET3_CP_DMA_ENGINE(x) ((x) << 27)
/* 0 - ME
* 1 - PFP
*/
# define PACKET3_CP_DMA_SRC_SEL(x) ((x) << 29)
/* 0 - SRC_ADDR
* 1 - GDS
* 2 - DATA
*/
# define PACKET3_CP_DMA_CP_SYNC (1 << 31)
/* COMMAND */
# define PACKET3_CP_DMA_DIS_WC (1 << 21)
# define PACKET3_CP_DMA_CMD_SRC_SWAP(x) ((x) << 22)
/* 0 - none
* 1 - 8 in 16
* 2 - 8 in 32
* 3 - 8 in 64
*/
# define PACKET3_CP_DMA_CMD_DST_SWAP(x) ((x) << 24)
/* 0 - none
* 1 - 8 in 16
* 2 - 8 in 32
* 3 - 8 in 64
*/
# define PACKET3_CP_DMA_CMD_SAS (1 << 26)
/* 0 - memory
* 1 - register
*/
# define PACKET3_CP_DMA_CMD_DAS (1 << 27)
/* 0 - memory
* 1 - register
*/
# define PACKET3_CP_DMA_CMD_SAIC (1 << 28)
# define PACKET3_CP_DMA_CMD_DAIC (1 << 29)
# define PACKET3_CP_DMA_CMD_RAW_WAIT (1 << 30)
#define PACKET3_PFP_SYNC_ME 0x42
#define PACKET3_SURFACE_SYNC 0x43
# define PACKET3_DEST_BASE_0_ENA (1 << 0)
# define PACKET3_DEST_BASE_1_ENA (1 << 1)
# define PACKET3_CB0_DEST_BASE_ENA (1 << 6)
# define PACKET3_CB1_DEST_BASE_ENA (1 << 7)
# define PACKET3_CB2_DEST_BASE_ENA (1 << 8)
# define PACKET3_CB3_DEST_BASE_ENA (1 << 9)
# define PACKET3_CB4_DEST_BASE_ENA (1 << 10)
# define PACKET3_CB5_DEST_BASE_ENA (1 << 11)
# define PACKET3_CB6_DEST_BASE_ENA (1 << 12)
# define PACKET3_CB7_DEST_BASE_ENA (1 << 13)
# define PACKET3_DB_DEST_BASE_ENA (1 << 14)
# define PACKET3_DEST_BASE_2_ENA (1 << 19)
# define PACKET3_DEST_BASE_3_ENA (1 << 21)
# define PACKET3_TCL1_ACTION_ENA (1 << 22)
# define PACKET3_TC_ACTION_ENA (1 << 23)
# define PACKET3_CB_ACTION_ENA (1 << 25)
# define PACKET3_DB_ACTION_ENA (1 << 26)
# define PACKET3_SH_KCACHE_ACTION_ENA (1 << 27)
# define PACKET3_SH_ICACHE_ACTION_ENA (1 << 29)
#define PACKET3_ME_INITIALIZE 0x44
#define PACKET3_ME_INITIALIZE_DEVICE_ID(x) ((x) << 16)
#define PACKET3_COND_WRITE 0x45
#define PACKET3_EVENT_WRITE 0x46
#define EVENT_TYPE(x) ((x) << 0)
#define EVENT_INDEX(x) ((x) << 8)
/* 0 - any non-TS event
* 1 - ZPASS_DONE
* 2 - SAMPLE_PIPELINESTAT
* 3 - SAMPLE_STREAMOUTSTAT*
* 4 - *S_PARTIAL_FLUSH
* 5 - EOP events
* 6 - EOS events
* 7 - CACHE_FLUSH, CACHE_FLUSH_AND_INV_EVENT
*/
#define INV_L2 (1 << 20)
/* INV TC L2 cache when EVENT_INDEX = 7 */
#define PACKET3_EVENT_WRITE_EOP 0x47
#define DATA_SEL(x) ((x) << 29)
/* 0 - discard
* 1 - send low 32bit data
* 2 - send 64bit data
* 3 - send 64bit counter value
*/
#define INT_SEL(x) ((x) << 24)
/* 0 - none
* 1 - interrupt only (DATA_SEL = 0)
* 2 - interrupt when data write is confirmed
*/
#define PACKET3_EVENT_WRITE_EOS 0x48
#define PACKET3_PREAMBLE_CNTL 0x4A
# define PACKET3_PREAMBLE_BEGIN_CLEAR_STATE (2 << 28)
# define PACKET3_PREAMBLE_END_CLEAR_STATE (3 << 28)
#define PACKET3_ONE_REG_WRITE 0x57
#define PACKET3_LOAD_CONFIG_REG 0x5F
#define PACKET3_LOAD_CONTEXT_REG 0x60
#define PACKET3_LOAD_SH_REG 0x61
#define PACKET3_SET_CONFIG_REG 0x68
#define PACKET3_SET_CONFIG_REG_START 0x00008000
#define PACKET3_SET_CONFIG_REG_END 0x0000b000
#define PACKET3_SET_CONTEXT_REG 0x69
#define PACKET3_SET_CONTEXT_REG_START 0x00028000
#define PACKET3_SET_CONTEXT_REG_END 0x00029000
#define PACKET3_SET_CONTEXT_REG_INDIRECT 0x73
#define PACKET3_SET_RESOURCE_INDIRECT 0x74
#define PACKET3_SET_SH_REG 0x76
#define PACKET3_SET_SH_REG_START 0x0000b000
#define PACKET3_SET_SH_REG_END 0x0000c000
#define PACKET3_SET_SH_REG_OFFSET 0x77
#define PACKET3_ME_WRITE 0x7A
#define PACKET3_SCRATCH_RAM_WRITE 0x7D
#define PACKET3_SCRATCH_RAM_READ 0x7E
#define PACKET3_CE_WRITE 0x7F
#define PACKET3_LOAD_CONST_RAM 0x80
#define PACKET3_WRITE_CONST_RAM 0x81
#define PACKET3_WRITE_CONST_RAM_OFFSET 0x82
#define PACKET3_DUMP_CONST_RAM 0x83
#define PACKET3_INCREMENT_CE_COUNTER 0x84
#define PACKET3_INCREMENT_DE_COUNTER 0x85
#define PACKET3_WAIT_ON_CE_COUNTER 0x86
#define PACKET3_WAIT_ON_DE_COUNTER 0x87
#define PACKET3_WAIT_ON_DE_COUNTER_DIFF 0x88
#define PACKET3_SET_CE_DE_COUNTERS 0x89
#define PACKET3_WAIT_ON_AVAIL_BUFFER 0x8A
#define PACKET3_SWITCH_BUFFER 0x8B
/* ASYNC DMA - first instance at 0xd000, second at 0xd800 */
#define DMA0_REGISTER_OFFSET 0x0 /* not a register */
#define DMA1_REGISTER_OFFSET 0x800 /* not a register */
#define DMA_RB_CNTL 0xd000
# define DMA_RB_ENABLE (1 << 0)
# define DMA_RB_SIZE(x) ((x) << 1) /* log2 */
# define DMA_RB_SWAP_ENABLE (1 << 9) /* 8IN32 */
# define DMA_RPTR_WRITEBACK_ENABLE (1 << 12)
# define DMA_RPTR_WRITEBACK_SWAP_ENABLE (1 << 13) /* 8IN32 */
# define DMA_RPTR_WRITEBACK_TIMER(x) ((x) << 16) /* log2 */
#define DMA_RB_BASE 0xd004
#define DMA_RB_RPTR 0xd008
#define DMA_RB_WPTR 0xd00c
#define DMA_RB_RPTR_ADDR_HI 0xd01c
#define DMA_RB_RPTR_ADDR_LO 0xd020
#define DMA_IB_CNTL 0xd024
# define DMA_IB_ENABLE (1 << 0)
# define DMA_IB_SWAP_ENABLE (1 << 4)
#define DMA_IB_RPTR 0xd028
#define DMA_CNTL 0xd02c
# define TRAP_ENABLE (1 << 0)
# define SEM_INCOMPLETE_INT_ENABLE (1 << 1)
# define SEM_WAIT_INT_ENABLE (1 << 2)
# define DATA_SWAP_ENABLE (1 << 3)
# define FENCE_SWAP_ENABLE (1 << 4)
# define CTXEMPTY_INT_ENABLE (1 << 28)
#define DMA_STATUS_REG 0xd034
# define DMA_IDLE (1 << 0)
#define DMA_TILING_CONFIG 0xd0b8
#define DMA_POWER_CNTL 0xd0bc
# define MEM_POWER_OVERRIDE (1 << 8)
#define DMA_CLK_CTRL 0xd0c0
#define DMA_PG 0xd0d4
# define PG_CNTL_ENABLE (1 << 0)
#define DMA_PGFSM_CONFIG 0xd0d8
#define DMA_PGFSM_WRITE 0xd0dc
#define DMA_PACKET(cmd, b, t, s, n) ((((cmd) & 0xF) << 28) | \
(((b) & 0x1) << 26) | \
(((t) & 0x1) << 23) | \
(((s) & 0x1) << 22) | \
(((n) & 0xFFFFF) << 0))
#define DMA_IB_PACKET(cmd, vmid, n) ((((cmd) & 0xF) << 28) | \
(((vmid) & 0xF) << 20) | \
(((n) & 0xFFFFF) << 0))
#define DMA_PTE_PDE_PACKET(n) ((2 << 28) | \
(1 << 26) | \
(1 << 21) | \
(((n) & 0xFFFFF) << 0))
/* async DMA Packet types */
#define DMA_PACKET_WRITE 0x2
#define DMA_PACKET_COPY 0x3
#define DMA_PACKET_INDIRECT_BUFFER 0x4
#define DMA_PACKET_SEMAPHORE 0x5
#define DMA_PACKET_FENCE 0x6
#define DMA_PACKET_TRAP 0x7
#define DMA_PACKET_SRBM_WRITE 0x9
#define DMA_PACKET_CONSTANT_FILL 0xd
#define DMA_PACKET_POLL_REG_MEM 0xe
#define DMA_PACKET_NOP 0xf
#define VCE_STATUS 0x20004
#define VCE_VCPU_CNTL 0x20014
#define VCE_CLK_EN (1 << 0)
#define VCE_VCPU_CACHE_OFFSET0 0x20024
#define VCE_VCPU_CACHE_SIZE0 0x20028
#define VCE_VCPU_CACHE_OFFSET1 0x2002c
#define VCE_VCPU_CACHE_SIZE1 0x20030
#define VCE_VCPU_CACHE_OFFSET2 0x20034
#define VCE_VCPU_CACHE_SIZE2 0x20038
#define VCE_SOFT_RESET 0x20120
#define VCE_ECPU_SOFT_RESET (1 << 0)
#define VCE_FME_SOFT_RESET (1 << 2)
#define VCE_RB_BASE_LO2 0x2016c
#define VCE_RB_BASE_HI2 0x20170
#define VCE_RB_SIZE2 0x20174
#define VCE_RB_RPTR2 0x20178
#define VCE_RB_WPTR2 0x2017c
#define VCE_RB_BASE_LO 0x20180
#define VCE_RB_BASE_HI 0x20184
#define VCE_RB_SIZE 0x20188
#define VCE_RB_RPTR 0x2018c
#define VCE_RB_WPTR 0x20190
#define VCE_CLOCK_GATING_A 0x202f8
#define VCE_CLOCK_GATING_B 0x202fc
#define VCE_UENC_CLOCK_GATING 0x205bc
#define VCE_UENC_REG_CLOCK_GATING 0x205c0
#define VCE_FW_REG_STATUS 0x20e10
# define VCE_FW_REG_STATUS_BUSY (1 << 0)
# define VCE_FW_REG_STATUS_PASS (1 << 3)
# define VCE_FW_REG_STATUS_DONE (1 << 11)
#define VCE_LMI_FW_START_KEYSEL 0x20e18
#define VCE_LMI_FW_PERIODIC_CTRL 0x20e20
#define VCE_LMI_CTRL2 0x20e74
#define VCE_LMI_CTRL 0x20e98
#define VCE_LMI_VM_CTRL 0x20ea0
#define VCE_LMI_SWAP_CNTL 0x20eb4
#define VCE_LMI_SWAP_CNTL1 0x20eb8
#define VCE_LMI_CACHE_CTRL 0x20ef4
#define VCE_CMD_NO_OP 0x00000000
#define VCE_CMD_END 0x00000001
#define VCE_CMD_IB 0x00000002
#define VCE_CMD_FENCE 0x00000003
#define VCE_CMD_TRAP 0x00000004
#define VCE_CMD_IB_AUTO 0x00000005
#define VCE_CMD_SEMAPHORE 0x00000006
#endif