- 根目录:
- drivers
- net
- ethernet
- 3com
- 3c589_cs.c
/* ======================================================================
*
* A PCMCIA ethernet driver for the 3com 3c589 card.
*
* Copyright (C) 1999 David A. Hinds -- dahinds@users.sourceforge.net
*
* 3c589_cs.c 1.162 2001/10/13 00:08:50
*
* The network driver code is based on Donald Becker's 3c589 code:
*
* Written 1994 by Donald Becker.
* Copyright 1993 United States Government as represented by the
* Director, National Security Agency. This software may be used and
* distributed according to the terms of the GNU General Public License,
* incorporated herein by reference.
* Donald Becker may be reached at becker@scyld.com
*
* Updated for 2.5.x by Alan Cox <alan@lxorguk.ukuu.org.uk>
*
* ======================================================================
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#define DRV_NAME "3c589_cs"
#define DRV_VERSION "1.162-ac"
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/in.h>
#include <linux/delay.h>
#include <linux/ethtool.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/if_arp.h>
#include <linux/ioport.h>
#include <linux/bitops.h>
#include <linux/jiffies.h>
#include <linux/uaccess.h>
#include <linux/io.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ciscode.h>
#include <pcmcia/ds.h>
/* To minimize the size of the driver source I only define operating
* constants if they are used several times. You'll need the manual
* if you want to understand driver details.
*/
/* Offsets from base I/O address. */
#define EL3_DATA 0x00
#define EL3_TIMER 0x0a
#define EL3_CMD 0x0e
#define EL3_STATUS 0x0e
#define EEPROM_READ 0x0080
#define EEPROM_BUSY 0x8000
#define EL3WINDOW(win_num) outw(SelectWindow + (win_num), ioaddr + EL3_CMD)
/* The top five bits written to EL3_CMD are a command, the lower
* 11 bits are the parameter, if applicable.
*/
enum c509cmd {
TotalReset = 0<<11,
SelectWindow = 1<<11,
StartCoax = 2<<11,
RxDisable = 3<<11,
RxEnable = 4<<11,
RxReset = 5<<11,
RxDiscard = 8<<11,
TxEnable = 9<<11,
TxDisable = 10<<11,
TxReset = 11<<11,
FakeIntr = 12<<11,
AckIntr = 13<<11,
SetIntrEnb = 14<<11,
SetStatusEnb = 15<<11,
SetRxFilter = 16<<11,
SetRxThreshold = 17<<11,
SetTxThreshold = 18<<11,
SetTxStart = 19<<11,
StatsEnable = 21<<11,
StatsDisable = 22<<11,
StopCoax = 23<<11
};
enum c509status {
IntLatch = 0x0001,
AdapterFailure = 0x0002,
TxComplete = 0x0004,
TxAvailable = 0x0008,
RxComplete = 0x0010,
RxEarly = 0x0020,
IntReq = 0x0040,
StatsFull = 0x0080,
CmdBusy = 0x1000
};
/* The SetRxFilter command accepts the following classes: */
enum RxFilter {
RxStation = 1,
RxMulticast = 2,
RxBroadcast = 4,
RxProm = 8
};
/* Register window 1 offsets, the window used in normal operation. */
#define TX_FIFO 0x00
#define RX_FIFO 0x00
#define RX_STATUS 0x08
#define TX_STATUS 0x0B
#define TX_FREE 0x0C /* Remaining free bytes in Tx buffer. */
#define WN0_IRQ 0x08 /* Window 0: Set IRQ line in bits 12-15. */
#define WN4_MEDIA 0x0A /* Window 4: Various transcvr/media bits. */
#define MEDIA_TP 0x00C0 /* Enable link beat and jabber for 10baseT. */
#define MEDIA_LED 0x0001 /* Enable link light on 3C589E cards. */
/* Time in jiffies before concluding Tx hung */
#define TX_TIMEOUT ((400*HZ)/1000)
struct el3_private {
struct pcmcia_device *p_dev;
/* For transceiver monitoring */
struct timer_list media;
u16 media_status;
u16 fast_poll;
unsigned long last_irq;
spinlock_t lock;
};
static const char *if_names[] = { "auto", "10baseT", "10base2", "AUI" };
/*====================================================================*/
/* Module parameters */
MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
MODULE_DESCRIPTION("3Com 3c589 series PCMCIA ethernet driver");
MODULE_LICENSE("GPL");
#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
/* Special hook for setting if_port when module is loaded */
INT_MODULE_PARM(if_port, 0);
/*====================================================================*/
static int tc589_config(struct pcmcia_device *link);
static void tc589_release(struct pcmcia_device *link);
static u16 read_eeprom(unsigned int ioaddr, int index);
static void tc589_reset(struct net_device *dev);
static void media_check(unsigned long arg);
static int el3_config(struct net_device *dev, struct ifmap *map);
static int el3_open(struct net_device *dev);
static netdev_tx_t el3_start_xmit(struct sk_buff *skb,
struct net_device *dev);
static irqreturn_t el3_interrupt(int irq, void *dev_id);
static void update_stats(struct net_device *dev);
static struct net_device_stats *el3_get_stats(struct net_device *dev);
static int el3_rx(struct net_device *dev);
static int el3_close(struct net_device *dev);
static void el3_tx_timeout(struct net_device *dev);
static void set_rx_mode(struct net_device *dev);
static void set_multicast_list(struct net_device *dev);
static const struct ethtool_ops netdev_ethtool_ops;
static void tc589_detach(struct pcmcia_device *p_dev);
static const struct net_device_ops el3_netdev_ops = {
.ndo_open = el3_open,
.ndo_stop = el3_close,
.ndo_start_xmit = el3_start_xmit,
.ndo_tx_timeout = el3_tx_timeout,
.ndo_set_config = el3_config,
.ndo_get_stats = el3_get_stats,
.ndo_set_rx_mode = set_multicast_list,
.ndo_change_mtu = eth_change_mtu,
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
};
static int tc589_probe(struct pcmcia_device *link)
{
struct el3_private *lp;
struct net_device *dev;
dev_dbg(&link->dev, "3c589_attach()\n");
/* Create new ethernet device */
dev = alloc_etherdev(sizeof(struct el3_private));
if (!dev)
return -ENOMEM;
lp = netdev_priv(dev);
link->priv = dev;
lp->p_dev = link;
spin_lock_init(&lp->lock);
link->resource[0]->end = 16;
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
link->config_flags |= CONF_ENABLE_IRQ;
link->config_index = 1;
dev->netdev_ops = &el3_netdev_ops;
dev->watchdog_timeo = TX_TIMEOUT;
dev->ethtool_ops = &netdev_ethtool_ops;
return tc589_config(link);
}
static void tc589_detach(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
dev_dbg(&link->dev, "3c589_detach\n");
unregister_netdev(dev);
tc589_release(link);
free_netdev(dev);
} /* tc589_detach */
static int tc589_config(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
__be16 *phys_addr;
int ret, i, j, multi = 0, fifo;
unsigned int ioaddr;
static const char * const ram_split[] = {"5:3", "3:1", "1:1", "3:5"};
u8 *buf;
size_t len;
dev_dbg(&link->dev, "3c589_config\n");
phys_addr = (__be16 *)dev->dev_addr;
/* Is this a 3c562? */
if (link->manf_id != MANFID_3COM)
dev_info(&link->dev, "hmmm, is this really a 3Com card??\n");
multi = (link->card_id == PRODID_3COM_3C562);
link->io_lines = 16;
/* For the 3c562, the base address must be xx00-xx7f */
for (i = j = 0; j < 0x400; j += 0x10) {
if (multi && (j & 0x80))
continue;
link->resource[0]->start = j ^ 0x300;
i = pcmcia_request_io(link);
if (i == 0)
break;
}
if (i != 0)
goto failed;
ret = pcmcia_request_irq(link, el3_interrupt);
if (ret)
goto failed;
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
dev->irq = link->irq;
dev->base_addr = link->resource[0]->start;
ioaddr = dev->base_addr;
EL3WINDOW(0);
/* The 3c589 has an extra EEPROM for configuration info, including
* the hardware address. The 3c562 puts the address in the CIS.
*/
len = pcmcia_get_tuple(link, 0x88, &buf);
if (buf && len >= 6) {
for (i = 0; i < 3; i++)
phys_addr[i] = htons(le16_to_cpu(buf[i*2]));
kfree(buf);
} else {
kfree(buf); /* 0 < len < 6 */
for (i = 0; i < 3; i++)
phys_addr[i] = htons(read_eeprom(ioaddr, i));
if (phys_addr[0] == htons(0x6060)) {
dev_err(&link->dev, "IO port conflict at 0x%03lx-0x%03lx\n",
dev->base_addr, dev->base_addr+15);
goto failed;
}
}
/* The address and resource configuration register aren't loaded from
* the EEPROM and *must* be set to 0 and IRQ3 for the PCMCIA version.
*/
outw(0x3f00, ioaddr + 8);
fifo = inl(ioaddr);
/* The if_port symbol can be set when the module is loaded */
if ((if_port >= 0) && (if_port <= 3))
dev->if_port = if_port;
else
dev_err(&link->dev, "invalid if_port requested\n");
SET_NETDEV_DEV(dev, &link->dev);
if (register_netdev(dev) != 0) {
dev_err(&link->dev, "register_netdev() failed\n");
goto failed;
}
netdev_info(dev, "3Com 3c%s, io %#3lx, irq %d, hw_addr %pM\n",
(multi ? "562" : "589"), dev->base_addr, dev->irq,
dev->dev_addr);
netdev_info(dev, " %dK FIFO split %s Rx:Tx, %s xcvr\n",
(fifo & 7) ? 32 : 8, ram_split[(fifo >> 16) & 3],
if_names[dev->if_port]);
return 0;
failed:
tc589_release(link);
return -ENODEV;
} /* tc589_config */
static void tc589_release(struct pcmcia_device *link)
{
pcmcia_disable_device(link);
}
static int tc589_suspend(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
if (link->open)
netif_device_detach(dev);
return 0;
}
static int tc589_resume(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
if (link->open) {
tc589_reset(dev);
netif_device_attach(dev);
}
return 0;
}
/*====================================================================*/
/* Use this for commands that may take time to finish */
static void tc589_wait_for_completion(struct net_device *dev, int cmd)
{
int i = 100;
outw(cmd, dev->base_addr + EL3_CMD);
while (--i > 0)
if (!(inw(dev->base_addr + EL3_STATUS) & 0x1000))
break;
if (i == 0)
netdev_warn(dev, "command 0x%04x did not complete!\n", cmd);
}
/* Read a word from the EEPROM using the regular EEPROM access register.
* Assume that we are in register window zero.
*/
static u16 read_eeprom(unsigned int ioaddr, int index)
{
int i;
outw(EEPROM_READ + index, ioaddr + 10);
/* Reading the eeprom takes 162 us */
for (i = 1620; i >= 0; i--)
if ((inw(ioaddr + 10) & EEPROM_BUSY) == 0)
break;
return inw(ioaddr + 12);
}
/* Set transceiver type, perhaps to something other than what the user
* specified in dev->if_port.
*/
static void tc589_set_xcvr(struct net_device *dev, int if_port)
{
struct el3_private *lp = netdev_priv(dev);
unsigned int ioaddr = dev->base_addr;
EL3WINDOW(0);
switch (if_port) {
case 0:
case 1:
outw(0, ioaddr + 6);
break;
case 2:
outw(3<<14, ioaddr + 6);
break;
case 3:
outw(1<<14, ioaddr + 6);
break;
}
/* On PCMCIA, this just turns on the LED */
outw((if_port == 2) ? StartCoax : StopCoax, ioaddr + EL3_CMD);
/* 10baseT interface, enable link beat and jabber check. */
EL3WINDOW(4);
outw(MEDIA_LED | ((if_port < 2) ? MEDIA_TP : 0), ioaddr + WN4_MEDIA);
EL3WINDOW(1);
if (if_port == 2)
lp->media_status = ((dev->if_port == 0) ? 0x8000 : 0x4000);
else
lp->media_status = ((dev->if_port == 0) ? 0x4010 : 0x8800);
}
static void dump_status(struct net_device *dev)
{
unsigned int ioaddr = dev->base_addr;
EL3WINDOW(1);
netdev_info(dev, " irq status %04x, rx status %04x, tx status %02x tx free %04x\n",
inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS),
inb(ioaddr+TX_STATUS), inw(ioaddr+TX_FREE));
EL3WINDOW(4);
netdev_info(dev, " diagnostics: fifo %04x net %04x ethernet %04x media %04x\n",
inw(ioaddr+0x04), inw(ioaddr+0x06), inw(ioaddr+0x08),
inw(ioaddr+0x0a));
EL3WINDOW(1);
}
/* Reset and restore all of the 3c589 registers. */
static void tc589_reset(struct net_device *dev)
{
unsigned int ioaddr = dev->base_addr;
int i;
EL3WINDOW(0);
outw(0x0001, ioaddr + 4); /* Activate board. */
outw(0x3f00, ioaddr + 8); /* Set the IRQ line. */
/* Set the station address in window 2. */
EL3WINDOW(2);
for (i = 0; i < 6; i++)
outb(dev->dev_addr[i], ioaddr + i);
tc589_set_xcvr(dev, dev->if_port);
/* Switch to the stats window, and clear all stats by reading. */
outw(StatsDisable, ioaddr + EL3_CMD);
EL3WINDOW(6);
for (i = 0; i < 9; i++)
inb(ioaddr+i);
inw(ioaddr + 10);
inw(ioaddr + 12);
/* Switch to register set 1 for normal use. */
EL3WINDOW(1);
set_rx_mode(dev);
outw(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */
outw(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */
outw(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */
/* Allow status bits to be seen. */
outw(SetStatusEnb | 0xff, ioaddr + EL3_CMD);
/* Ack all pending events, and set active indicator mask. */
outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq,
ioaddr + EL3_CMD);
outw(SetIntrEnb | IntLatch | TxAvailable | RxComplete | StatsFull
| AdapterFailure, ioaddr + EL3_CMD);
}
static void netdev_get_drvinfo(struct net_device *dev,
struct ethtool_drvinfo *info)
{
strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
strlcpy(info->version, DRV_VERSION, sizeof(info->version));
snprintf(info->bus_info, sizeof(info->bus_info),
"PCMCIA 0x%lx", dev->base_addr);
}
static const struct ethtool_ops netdev_ethtool_ops = {
.get_drvinfo = netdev_get_drvinfo,
};
static int el3_config(struct net_device *dev, struct ifmap *map)
{
if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) {
if (map->port <= 3) {
dev->if_port = map->port;
netdev_info(dev, "switched to %s port\n", if_names[dev->if_port]);
tc589_set_xcvr(dev, dev->if_port);
} else {
return -EINVAL;
}
}
return 0;
}
static int el3_open(struct net_device *dev)
{
struct el3_private *lp = netdev_priv(dev);
struct pcmcia_device *link = lp->p_dev;
if (!pcmcia_dev_present(link))
return -ENODEV;
link->open++;
netif_start_queue(dev);
tc589_reset(dev);
setup_timer(&lp->media, media_check, (unsigned long)dev);
mod_timer(&lp->media, jiffies + HZ);
dev_dbg(&link->dev, "%s: opened, status %4.4x.\n",
dev->name, inw(dev->base_addr + EL3_STATUS));
return 0;
}
static void el3_tx_timeout(struct net_device *dev)
{
unsigned int ioaddr = dev->base_addr;
netdev_warn(dev, "Transmit timed out!\n");
dump_status(dev);
dev->stats.tx_errors++;
dev->trans_start = jiffies; /* prevent tx timeout */
/* Issue TX_RESET and TX_START commands. */
tc589_wait_for_completion(dev, TxReset);
outw(TxEnable, ioaddr + EL3_CMD);
netif_wake_queue(dev);
}
static void pop_tx_status(struct net_device *dev)
{
unsigned int ioaddr = dev->base_addr;
int i;
/* Clear the Tx status stack. */
for (i = 32; i > 0; i--) {
u_char tx_status = inb(ioaddr + TX_STATUS);
if (!(tx_status & 0x84))
break;
/* reset transmitter on jabber error or underrun */
if (tx_status & 0x30)
tc589_wait_for_completion(dev, TxReset);
if (tx_status & 0x38) {
netdev_dbg(dev, "transmit error: status 0x%02x\n", tx_status);
outw(TxEnable, ioaddr + EL3_CMD);
dev->stats.tx_aborted_errors++;
}
outb(0x00, ioaddr + TX_STATUS); /* Pop the status stack. */
}
}
static netdev_tx_t el3_start_xmit(struct sk_buff *skb,
struct net_device *dev)
{
unsigned int ioaddr = dev->base_addr;
struct el3_private *priv = netdev_priv(dev);
unsigned long flags;
netdev_dbg(dev, "el3_start_xmit(length = %ld) called, status %4.4x.\n",
(long)skb->len, inw(ioaddr + EL3_STATUS));
spin_lock_irqsave(&priv->lock, flags);
dev->stats.tx_bytes += skb->len;
/* Put out the doubleword header... */
outw(skb->len, ioaddr + TX_FIFO);
outw(0x00, ioaddr + TX_FIFO);
/* ... and the packet rounded to a doubleword. */
outsl(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2);
if (inw(ioaddr + TX_FREE) <= 1536) {
netif_stop_queue(dev);
/* Interrupt us when the FIFO has room for max-sized packet. */
outw(SetTxThreshold + 1536, ioaddr + EL3_CMD);
}
pop_tx_status(dev);
spin_unlock_irqrestore(&priv->lock, flags);
dev_kfree_skb(skb);
return NETDEV_TX_OK;
}
/* The EL3 interrupt handler. */
static irqreturn_t el3_interrupt(int irq, void *dev_id)
{
struct net_device *dev = (struct net_device *) dev_id;
struct el3_private *lp = netdev_priv(dev);
unsigned int ioaddr;
__u16 status;
int i = 0, handled = 1;
if (!netif_device_present(dev))
return IRQ_NONE;
ioaddr = dev->base_addr;
netdev_dbg(dev, "interrupt, status %4.4x.\n", inw(ioaddr + EL3_STATUS));
spin_lock(&lp->lock);
while ((status = inw(ioaddr + EL3_STATUS)) &
(IntLatch | RxComplete | StatsFull)) {
if ((status & 0xe000) != 0x2000) {
netdev_dbg(dev, "interrupt from dead card\n");
handled = 0;
break;
}
if (status & RxComplete)
el3_rx(dev);
if (status & TxAvailable) {
netdev_dbg(dev, " TX room bit was handled.\n");
/* There's room in the FIFO for a full-sized packet. */
outw(AckIntr | TxAvailable, ioaddr + EL3_CMD);
netif_wake_queue(dev);
}
if (status & TxComplete)
pop_tx_status(dev);
if (status & (AdapterFailure | RxEarly | StatsFull)) {
/* Handle all uncommon interrupts. */
if (status & StatsFull) /* Empty statistics. */
update_stats(dev);
if (status & RxEarly) {
/* Rx early is unused. */
el3_rx(dev);
outw(AckIntr | RxEarly, ioaddr + EL3_CMD);
}
if (status & AdapterFailure) {
u16 fifo_diag;
EL3WINDOW(4);
fifo_diag = inw(ioaddr + 4);
EL3WINDOW(1);
netdev_warn(dev, "adapter failure, FIFO diagnostic register %04x.\n",
fifo_diag);
if (fifo_diag & 0x0400) {
/* Tx overrun */
tc589_wait_for_completion(dev, TxReset);
outw(TxEnable, ioaddr + EL3_CMD);
}
if (fifo_diag & 0x2000) {
/* Rx underrun */
tc589_wait_for_completion(dev, RxReset);
set_rx_mode(dev);
outw(RxEnable, ioaddr + EL3_CMD);
}
outw(AckIntr | AdapterFailure, ioaddr + EL3_CMD);
}
}
if (++i > 10) {
netdev_err(dev, "infinite loop in interrupt, status %4.4x.\n",
status);
/* Clear all interrupts */
outw(AckIntr | 0xFF, ioaddr + EL3_CMD);
break;
}
/* Acknowledge the IRQ. */
outw(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD);
}
lp->last_irq = jiffies;
spin_unlock(&lp->lock);
netdev_dbg(dev, "exiting interrupt, status %4.4x.\n",
inw(ioaddr + EL3_STATUS));
return IRQ_RETVAL(handled);
}
static void media_check(unsigned long arg)
{
struct net_device *dev = (struct net_device *)(arg);
struct el3_private *lp = netdev_priv(dev);
unsigned int ioaddr = dev->base_addr;
u16 media, errs;
unsigned long flags;
if (!netif_device_present(dev))
goto reschedule;
/* Check for pending interrupt with expired latency timer: with
* this, we can limp along even if the interrupt is blocked
*/
if ((inw(ioaddr + EL3_STATUS) & IntLatch) &&
(inb(ioaddr + EL3_TIMER) == 0xff)) {
if (!lp->fast_poll)
netdev_warn(dev, "interrupt(s) dropped!\n");
local_irq_save(flags);
el3_interrupt(dev->irq, dev);
local_irq_restore(flags);
lp->fast_poll = HZ;
}
if (lp->fast_poll) {
lp->fast_poll--;
lp->media.expires = jiffies + HZ/100;
add_timer(&lp->media);
return;
}
/* lp->lock guards the EL3 window. Window should always be 1 except
* when the lock is held
*/
spin_lock_irqsave(&lp->lock, flags);
EL3WINDOW(4);
media = inw(ioaddr+WN4_MEDIA) & 0xc810;
/* Ignore collisions unless we've had no irq's recently */
if (time_before(jiffies, lp->last_irq + HZ)) {
media &= ~0x0010;
} else {
/* Try harder to detect carrier errors */
EL3WINDOW(6);
outw(StatsDisable, ioaddr + EL3_CMD);
errs = inb(ioaddr + 0);
outw(StatsEnable, ioaddr + EL3_CMD);
dev->stats.tx_carrier_errors += errs;
if (errs || (lp->media_status & 0x0010))
media |= 0x0010;
}
if (media != lp->media_status) {
if ((media & lp->media_status & 0x8000) &&
((lp->media_status ^ media) & 0x0800))
netdev_info(dev, "%s link beat\n",
(lp->media_status & 0x0800 ? "lost" : "found"));
else if ((media & lp->media_status & 0x4000) &&
((lp->media_status ^ media) & 0x0010))
netdev_info(dev, "coax cable %s\n",
(lp->media_status & 0x0010 ? "ok" : "problem"));
if (dev->if_port == 0) {
if (media & 0x8000) {
if (media & 0x0800)
netdev_info(dev, "flipped to 10baseT\n");
else
tc589_set_xcvr(dev, 2);
} else if (media & 0x4000) {
if (media & 0x0010)
tc589_set_xcvr(dev, 1);
else
netdev_info(dev, "flipped to 10base2\n");
}
}
lp->media_status = media;
}
EL3WINDOW(1);
spin_unlock_irqrestore(&lp->lock, flags);
reschedule:
lp->media.expires = jiffies + HZ;
add_timer(&lp->media);
}
static struct net_device_stats *el3_get_stats(struct net_device *dev)
{
struct el3_private *lp = netdev_priv(dev);
unsigned long flags;
struct pcmcia_device *link = lp->p_dev;
if (pcmcia_dev_present(link)) {
spin_lock_irqsave(&lp->lock, flags);
update_stats(dev);
spin_unlock_irqrestore(&lp->lock, flags);
}
return &dev->stats;
}
/* Update statistics. We change to register window 6, so this should be run
* single-threaded if the device is active. This is expected to be a rare
* operation, and it's simpler for the rest of the driver to assume that
* window 1 is always valid rather than use a special window-state variable.
*
* Caller must hold the lock for this
*/
static void update_stats(struct net_device *dev)
{
unsigned int ioaddr = dev->base_addr;
netdev_dbg(dev, "updating the statistics.\n");
/* Turn off statistics updates while reading. */
outw(StatsDisable, ioaddr + EL3_CMD);
/* Switch to the stats window, and read everything. */
EL3WINDOW(6);
dev->stats.tx_carrier_errors += inb(ioaddr + 0);
dev->stats.tx_heartbeat_errors += inb(ioaddr + 1);
/* Multiple collisions. */
inb(ioaddr + 2);
dev->stats.collisions += inb(ioaddr + 3);
dev->stats.tx_window_errors += inb(ioaddr + 4);
dev->stats.rx_fifo_errors += inb(ioaddr + 5);
dev->stats.tx_packets += inb(ioaddr + 6);
/* Rx packets */
inb(ioaddr + 7);
/* Tx deferrals */
inb(ioaddr + 8);
/* Rx octets */
inw(ioaddr + 10);
/* Tx octets */
inw(ioaddr + 12);
/* Back to window 1, and turn statistics back on. */
EL3WINDOW(1);
outw(StatsEnable, ioaddr + EL3_CMD);
}
static int el3_rx(struct net_device *dev)
{
unsigned int ioaddr = dev->base_addr;
int worklimit = 32;
short rx_status;
netdev_dbg(dev, "in rx_packet(), status %4.4x, rx_status %4.4x.\n",
inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS));
while (!((rx_status = inw(ioaddr + RX_STATUS)) & 0x8000) &&
worklimit > 0) {
worklimit--;
if (rx_status & 0x4000) { /* Error, update stats. */
short error = rx_status & 0x3800;
dev->stats.rx_errors++;
switch (error) {
case 0x0000:
dev->stats.rx_over_errors++;
break;
case 0x0800:
dev->stats.rx_length_errors++;
break;
case 0x1000:
dev->stats.rx_frame_errors++;
break;
case 0x1800:
dev->stats.rx_length_errors++;
break;
case 0x2000:
dev->stats.rx_frame_errors++;
break;
case 0x2800:
dev->stats.rx_crc_errors++;
break;
}
} else {
short pkt_len = rx_status & 0x7ff;
struct sk_buff *skb;
skb = netdev_alloc_skb(dev, pkt_len + 5);
netdev_dbg(dev, " Receiving packet size %d status %4.4x.\n",
pkt_len, rx_status);
if (skb != NULL) {
skb_reserve(skb, 2);
insl(ioaddr+RX_FIFO, skb_put(skb, pkt_len),
(pkt_len+3)>>2);
skb->protocol = eth_type_trans(skb, dev);
netif_rx(skb);
dev->stats.rx_packets++;
dev->stats.rx_bytes += pkt_len;
} else {
netdev_dbg(dev, "couldn't allocate a sk_buff of size %d.\n",
pkt_len);
dev->stats.rx_dropped++;
}
}
/* Pop the top of the Rx FIFO */
tc589_wait_for_completion(dev, RxDiscard);
}
if (worklimit == 0)
netdev_warn(dev, "too much work in el3_rx!\n");
return 0;
}
static void set_rx_mode(struct net_device *dev)
{
unsigned int ioaddr = dev->base_addr;
u16 opts = SetRxFilter | RxStation | RxBroadcast;
if (dev->flags & IFF_PROMISC)
opts |= RxMulticast | RxProm;
else if (!netdev_mc_empty(dev) || (dev->flags & IFF_ALLMULTI))
opts |= RxMulticast;
outw(opts, ioaddr + EL3_CMD);
}
static void set_multicast_list(struct net_device *dev)
{
struct el3_private *priv = netdev_priv(dev);
unsigned long flags;
spin_lock_irqsave(&priv->lock, flags);
set_rx_mode(dev);
spin_unlock_irqrestore(&priv->lock, flags);
}
static int el3_close(struct net_device *dev)
{
struct el3_private *lp = netdev_priv(dev);
struct pcmcia_device *link = lp->p_dev;
unsigned int ioaddr = dev->base_addr;
dev_dbg(&link->dev, "%s: shutting down ethercard.\n", dev->name);
if (pcmcia_dev_present(link)) {
/* Turn off statistics ASAP. We update dev->stats below. */
outw(StatsDisable, ioaddr + EL3_CMD);
/* Disable the receiver and transmitter. */
outw(RxDisable, ioaddr + EL3_CMD);
outw(TxDisable, ioaddr + EL3_CMD);
if (dev->if_port == 2)
/* Turn off thinnet power. Green! */
outw(StopCoax, ioaddr + EL3_CMD);
else if (dev->if_port == 1) {
/* Disable link beat and jabber */
EL3WINDOW(4);
outw(0, ioaddr + WN4_MEDIA);
}
/* Switching back to window 0 disables the IRQ. */
EL3WINDOW(0);
/* But we explicitly zero the IRQ line select anyway. */
outw(0x0f00, ioaddr + WN0_IRQ);
/* Check if the card still exists */
if ((inw(ioaddr+EL3_STATUS) & 0xe000) == 0x2000)
update_stats(dev);
}
link->open--;
netif_stop_queue(dev);
del_timer_sync(&lp->media);
return 0;
}
static const struct pcmcia_device_id tc589_ids[] = {
PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0101, 0x0562),
PCMCIA_MFC_DEVICE_PROD_ID1(0, "Motorola MARQUIS", 0xf03e4e77),
PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0589),
PCMCIA_DEVICE_PROD_ID12("Farallon", "ENet", 0x58d93fc4, 0x992c2202),
PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0101, 0x0035, "cis/3CXEM556.cis"),
PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0101, 0x003d, "cis/3CXEM556.cis"),
PCMCIA_DEVICE_NULL,
};
MODULE_DEVICE_TABLE(pcmcia, tc589_ids);
static struct pcmcia_driver tc589_driver = {
.owner = THIS_MODULE,
.name = "3c589_cs",
.probe = tc589_probe,
.remove = tc589_detach,
.id_table = tc589_ids,
.suspend = tc589_suspend,
.resume = tc589_resume,
};
module_pcmcia_driver(tc589_driver);