- 根目录:
- drivers
- net
- ethernet
- chelsio
- cxgb
- espi.c
/*****************************************************************************
* *
* File: espi.c *
* $Revision: 1.14 $ *
* $Date: 2005/05/14 00:59:32 $ *
* Description: *
* Ethernet SPI functionality. *
* part of the Chelsio 10Gb Ethernet Driver. *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License, version 2, as *
* published by the Free Software Foundation. *
* *
* You should have received a copy of the GNU General Public License along *
* with this program; if not, see <http://www.gnu.org/licenses/>. *
* *
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED *
* WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF *
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. *
* *
* http://www.chelsio.com *
* *
* Copyright (c) 2003 - 2005 Chelsio Communications, Inc. *
* All rights reserved. *
* *
* Maintainers: maintainers@chelsio.com *
* *
* Authors: Dimitrios Michailidis <dm@chelsio.com> *
* Tina Yang <tainay@chelsio.com> *
* Felix Marti <felix@chelsio.com> *
* Scott Bardone <sbardone@chelsio.com> *
* Kurt Ottaway <kottaway@chelsio.com> *
* Frank DiMambro <frank@chelsio.com> *
* *
* History: *
* *
****************************************************************************/
#include "common.h"
#include "regs.h"
#include "espi.h"
struct peespi {
adapter_t *adapter;
struct espi_intr_counts intr_cnt;
u32 misc_ctrl;
spinlock_t lock;
};
#define ESPI_INTR_MASK (F_DIP4ERR | F_RXDROP | F_TXDROP | F_RXOVERFLOW | \
F_RAMPARITYERR | F_DIP2PARITYERR)
#define MON_MASK (V_MONITORED_PORT_NUM(3) | F_MONITORED_DIRECTION \
| F_MONITORED_INTERFACE)
#define TRICN_CNFG 14
#define TRICN_CMD_READ 0x11
#define TRICN_CMD_WRITE 0x21
#define TRICN_CMD_ATTEMPTS 10
static int tricn_write(adapter_t *adapter, int bundle_addr, int module_addr,
int ch_addr, int reg_offset, u32 wr_data)
{
int busy, attempts = TRICN_CMD_ATTEMPTS;
writel(V_WRITE_DATA(wr_data) |
V_REGISTER_OFFSET(reg_offset) |
V_CHANNEL_ADDR(ch_addr) | V_MODULE_ADDR(module_addr) |
V_BUNDLE_ADDR(bundle_addr) |
V_SPI4_COMMAND(TRICN_CMD_WRITE),
adapter->regs + A_ESPI_CMD_ADDR);
writel(0, adapter->regs + A_ESPI_GOSTAT);
do {
busy = readl(adapter->regs + A_ESPI_GOSTAT) & F_ESPI_CMD_BUSY;
} while (busy && --attempts);
if (busy)
pr_err("%s: TRICN write timed out\n", adapter->name);
return busy;
}
static int tricn_init(adapter_t *adapter)
{
int i, sme = 1;
if (!(readl(adapter->regs + A_ESPI_RX_RESET) & F_RX_CLK_STATUS)) {
pr_err("%s: ESPI clock not ready\n", adapter->name);
return -1;
}
writel(F_ESPI_RX_CORE_RST, adapter->regs + A_ESPI_RX_RESET);
if (sme) {
tricn_write(adapter, 0, 0, 0, TRICN_CNFG, 0x81);
tricn_write(adapter, 0, 1, 0, TRICN_CNFG, 0x81);
tricn_write(adapter, 0, 2, 0, TRICN_CNFG, 0x81);
}
for (i = 1; i <= 8; i++)
tricn_write(adapter, 0, 0, i, TRICN_CNFG, 0xf1);
for (i = 1; i <= 2; i++)
tricn_write(adapter, 0, 1, i, TRICN_CNFG, 0xf1);
for (i = 1; i <= 3; i++)
tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xe1);
tricn_write(adapter, 0, 2, 4, TRICN_CNFG, 0xf1);
tricn_write(adapter, 0, 2, 5, TRICN_CNFG, 0xe1);
tricn_write(adapter, 0, 2, 6, TRICN_CNFG, 0xf1);
tricn_write(adapter, 0, 2, 7, TRICN_CNFG, 0x80);
tricn_write(adapter, 0, 2, 8, TRICN_CNFG, 0xf1);
writel(F_ESPI_RX_CORE_RST | F_ESPI_RX_LNK_RST,
adapter->regs + A_ESPI_RX_RESET);
return 0;
}
void t1_espi_intr_enable(struct peespi *espi)
{
u32 enable, pl_intr = readl(espi->adapter->regs + A_PL_ENABLE);
/*
* Cannot enable ESPI interrupts on T1B because HW asserts the
* interrupt incorrectly, namely the driver gets ESPI interrupts
* but no data is actually dropped (can verify this reading the ESPI
* drop registers). Also, once the ESPI interrupt is asserted it
* cannot be cleared (HW bug).
*/
enable = t1_is_T1B(espi->adapter) ? 0 : ESPI_INTR_MASK;
writel(enable, espi->adapter->regs + A_ESPI_INTR_ENABLE);
writel(pl_intr | F_PL_INTR_ESPI, espi->adapter->regs + A_PL_ENABLE);
}
void t1_espi_intr_clear(struct peespi *espi)
{
readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT);
writel(0xffffffff, espi->adapter->regs + A_ESPI_INTR_STATUS);
writel(F_PL_INTR_ESPI, espi->adapter->regs + A_PL_CAUSE);
}
void t1_espi_intr_disable(struct peespi *espi)
{
u32 pl_intr = readl(espi->adapter->regs + A_PL_ENABLE);
writel(0, espi->adapter->regs + A_ESPI_INTR_ENABLE);
writel(pl_intr & ~F_PL_INTR_ESPI, espi->adapter->regs + A_PL_ENABLE);
}
int t1_espi_intr_handler(struct peespi *espi)
{
u32 status = readl(espi->adapter->regs + A_ESPI_INTR_STATUS);
if (status & F_DIP4ERR)
espi->intr_cnt.DIP4_err++;
if (status & F_RXDROP)
espi->intr_cnt.rx_drops++;
if (status & F_TXDROP)
espi->intr_cnt.tx_drops++;
if (status & F_RXOVERFLOW)
espi->intr_cnt.rx_ovflw++;
if (status & F_RAMPARITYERR)
espi->intr_cnt.parity_err++;
if (status & F_DIP2PARITYERR) {
espi->intr_cnt.DIP2_parity_err++;
/*
* Must read the error count to clear the interrupt
* that it causes.
*/
readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT);
}
/*
* For T1B we need to write 1 to clear ESPI interrupts. For T2+ we
* write the status as is.
*/
if (status && t1_is_T1B(espi->adapter))
status = 1;
writel(status, espi->adapter->regs + A_ESPI_INTR_STATUS);
return 0;
}
const struct espi_intr_counts *t1_espi_get_intr_counts(struct peespi *espi)
{
return &espi->intr_cnt;
}
static void espi_setup_for_pm3393(adapter_t *adapter)
{
u32 wmark = t1_is_T1B(adapter) ? 0x4000 : 0x3200;
writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN0);
writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN1);
writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN2);
writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN3);
writel(0x100, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK);
writel(wmark, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK);
writel(3, adapter->regs + A_ESPI_CALENDAR_LENGTH);
writel(0x08000008, adapter->regs + A_ESPI_TRAIN);
writel(V_RX_NPORTS(1) | V_TX_NPORTS(1), adapter->regs + A_PORT_CONFIG);
}
static void espi_setup_for_vsc7321(adapter_t *adapter)
{
writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN0);
writel(0x1f401f4, adapter->regs + A_ESPI_SCH_TOKEN1);
writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN2);
writel(0xa00, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK);
writel(0x1ff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK);
writel(1, adapter->regs + A_ESPI_CALENDAR_LENGTH);
writel(V_RX_NPORTS(4) | V_TX_NPORTS(4), adapter->regs + A_PORT_CONFIG);
writel(0x08000008, adapter->regs + A_ESPI_TRAIN);
}
/*
* Note that T1B requires at least 2 ports for IXF1010 due to a HW bug.
*/
static void espi_setup_for_ixf1010(adapter_t *adapter, int nports)
{
writel(1, adapter->regs + A_ESPI_CALENDAR_LENGTH);
if (nports == 4) {
if (is_T2(adapter)) {
writel(0xf00, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK);
writel(0x3c0, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK);
} else {
writel(0x7ff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK);
writel(0x1ff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK);
}
} else {
writel(0x1fff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK);
writel(0x7ff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK);
}
writel(V_RX_NPORTS(nports) | V_TX_NPORTS(nports), adapter->regs + A_PORT_CONFIG);
}
int t1_espi_init(struct peespi *espi, int mac_type, int nports)
{
u32 status_enable_extra = 0;
adapter_t *adapter = espi->adapter;
/* Disable ESPI training. MACs that can handle it enable it below. */
writel(0, adapter->regs + A_ESPI_TRAIN);
if (is_T2(adapter)) {
writel(V_OUT_OF_SYNC_COUNT(4) |
V_DIP2_PARITY_ERR_THRES(3) |
V_DIP4_THRES(1), adapter->regs + A_ESPI_MISC_CONTROL);
writel(nports == 4 ? 0x200040 : 0x1000080,
adapter->regs + A_ESPI_MAXBURST1_MAXBURST2);
} else
writel(0x800100, adapter->regs + A_ESPI_MAXBURST1_MAXBURST2);
if (mac_type == CHBT_MAC_PM3393)
espi_setup_for_pm3393(adapter);
else if (mac_type == CHBT_MAC_VSC7321)
espi_setup_for_vsc7321(adapter);
else if (mac_type == CHBT_MAC_IXF1010) {
status_enable_extra = F_INTEL1010MODE;
espi_setup_for_ixf1010(adapter, nports);
} else
return -1;
writel(status_enable_extra | F_RXSTATUSENABLE,
adapter->regs + A_ESPI_FIFO_STATUS_ENABLE);
if (is_T2(adapter)) {
tricn_init(adapter);
/*
* Always position the control at the 1st port egress IN
* (sop,eop) counter to reduce PIOs for T/N210 workaround.
*/
espi->misc_ctrl = readl(adapter->regs + A_ESPI_MISC_CONTROL);
espi->misc_ctrl &= ~MON_MASK;
espi->misc_ctrl |= F_MONITORED_DIRECTION;
if (adapter->params.nports == 1)
espi->misc_ctrl |= F_MONITORED_INTERFACE;
writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
spin_lock_init(&espi->lock);
}
return 0;
}
void t1_espi_destroy(struct peespi *espi)
{
kfree(espi);
}
struct peespi *t1_espi_create(adapter_t *adapter)
{
struct peespi *espi = kzalloc(sizeof(*espi), GFP_KERNEL);
if (espi)
espi->adapter = adapter;
return espi;
}
#if 0
void t1_espi_set_misc_ctrl(adapter_t *adapter, u32 val)
{
struct peespi *espi = adapter->espi;
if (!is_T2(adapter))
return;
spin_lock(&espi->lock);
espi->misc_ctrl = (val & ~MON_MASK) |
(espi->misc_ctrl & MON_MASK);
writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
spin_unlock(&espi->lock);
}
#endif /* 0 */
u32 t1_espi_get_mon(adapter_t *adapter, u32 addr, u8 wait)
{
struct peespi *espi = adapter->espi;
u32 sel;
if (!is_T2(adapter))
return 0;
sel = V_MONITORED_PORT_NUM((addr & 0x3c) >> 2);
if (!wait) {
if (!spin_trylock(&espi->lock))
return 0;
} else
spin_lock(&espi->lock);
if ((sel != (espi->misc_ctrl & MON_MASK))) {
writel(((espi->misc_ctrl & ~MON_MASK) | sel),
adapter->regs + A_ESPI_MISC_CONTROL);
sel = readl(adapter->regs + A_ESPI_SCH_TOKEN3);
writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
} else
sel = readl(adapter->regs + A_ESPI_SCH_TOKEN3);
spin_unlock(&espi->lock);
return sel;
}
/*
* This function is for T204 only.
* compare with t1_espi_get_mon(), it reads espiInTxSop[0 ~ 3] in
* one shot, since there is no per port counter on the out side.
*/
int t1_espi_get_mon_t204(adapter_t *adapter, u32 *valp, u8 wait)
{
struct peespi *espi = adapter->espi;
u8 i, nport = (u8)adapter->params.nports;
if (!wait) {
if (!spin_trylock(&espi->lock))
return -1;
} else
spin_lock(&espi->lock);
if ((espi->misc_ctrl & MON_MASK) != F_MONITORED_DIRECTION) {
espi->misc_ctrl = (espi->misc_ctrl & ~MON_MASK) |
F_MONITORED_DIRECTION;
writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
}
for (i = 0 ; i < nport; i++, valp++) {
if (i) {
writel(espi->misc_ctrl | V_MONITORED_PORT_NUM(i),
adapter->regs + A_ESPI_MISC_CONTROL);
}
*valp = readl(adapter->regs + A_ESPI_SCH_TOKEN3);
}
writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
spin_unlock(&espi->lock);
return 0;
}