- 根目录:
- drivers
- scsi
- bfa
- bfad_im.h
/*
* Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
* All rights reserved
* www.brocade.com
*
* Linux driver for Brocade Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
* published by the Free Software Foundation
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*/
#ifndef __BFAD_IM_H__
#define __BFAD_IM_H__
#include "bfa_fcs.h"
#define FCPI_NAME " fcpim"
#ifndef KOBJ_NAME_LEN
#define KOBJ_NAME_LEN 20
#endif
bfa_status_t bfad_im_module_init(void);
void bfad_im_module_exit(void);
bfa_status_t bfad_im_probe(struct bfad_s *bfad);
void bfad_im_probe_undo(struct bfad_s *bfad);
bfa_status_t bfad_im_port_new(struct bfad_s *bfad, struct bfad_port_s *port);
void bfad_im_port_delete(struct bfad_s *bfad, struct bfad_port_s *port);
void bfad_im_port_clean(struct bfad_im_port_s *im_port);
int bfad_im_scsi_host_alloc(struct bfad_s *bfad,
struct bfad_im_port_s *im_port, struct device *dev);
void bfad_im_scsi_host_free(struct bfad_s *bfad,
struct bfad_im_port_s *im_port);
u32 bfad_im_supported_speeds(struct bfa_s *bfa);
#define MAX_FCP_TARGET 1024
#define MAX_FCP_LUN 16384
#define BFAD_TARGET_RESET_TMO 60
#define BFAD_LUN_RESET_TMO 60
#define ScsiResult(host_code, scsi_code) (((host_code) << 16) | scsi_code)
#define BFA_QUEUE_FULL_RAMP_UP_TIME 120
/*
* itnim flags
*/
#define IO_DONE_BIT 0
struct bfad_itnim_data_s {
struct bfad_itnim_s *itnim;
};
struct bfad_im_port_s {
struct bfad_s *bfad;
struct bfad_port_s *port;
struct work_struct port_delete_work;
int idr_id;
u16 cur_scsi_id;
u16 flags;
struct list_head binding_list;
struct Scsi_Host *shost;
struct list_head itnim_mapped_list;
struct fc_vport *fc_vport;
};
enum bfad_itnim_state {
ITNIM_STATE_NONE,
ITNIM_STATE_ONLINE,
ITNIM_STATE_OFFLINE_PENDING,
ITNIM_STATE_OFFLINE,
ITNIM_STATE_TIMEOUT,
ITNIM_STATE_FREE,
};
/*
* Per itnim data structure
*/
struct bfad_itnim_s {
struct list_head list_entry;
struct bfa_fcs_itnim_s fcs_itnim;
struct work_struct itnim_work;
u32 flags;
enum bfad_itnim_state state;
struct bfad_im_s *im;
struct bfad_im_port_s *im_port;
struct bfad_rport_s *drv_rport;
struct fc_rport *fc_rport;
struct bfa_itnim_s *bfa_itnim;
u16 scsi_tgt_id;
u16 channel;
u16 queue_work;
unsigned long last_ramp_up_time;
unsigned long last_queue_full_time;
};
enum bfad_binding_type {
FCP_PWWN_BINDING = 0x1,
FCP_NWWN_BINDING = 0x2,
FCP_FCID_BINDING = 0x3,
};
struct bfad_fcp_binding {
struct list_head list_entry;
enum bfad_binding_type binding_type;
u16 scsi_target_id;
u32 fc_id;
wwn_t nwwn;
wwn_t pwwn;
};
struct bfad_im_s {
struct bfad_s *bfad;
struct workqueue_struct *drv_workq;
char drv_workq_name[KOBJ_NAME_LEN];
struct work_struct aen_im_notify_work;
};
#define bfad_get_aen_entry(_drv, _entry) do { \
unsigned long _flags; \
spin_lock_irqsave(&(_drv)->bfad_aen_spinlock, _flags); \
bfa_q_deq(&(_drv)->free_aen_q, &(_entry)); \
if (_entry) \
list_add_tail(&(_entry)->qe, &(_drv)->active_aen_q); \
spin_unlock_irqrestore(&(_drv)->bfad_aen_spinlock, _flags); \
} while (0)
/* post fc_host vendor event */
#define bfad_im_post_vendor_event(_entry, _drv, _cnt, _cat, _evt) do { \
do_gettimeofday(&(_entry)->aen_tv); \
(_entry)->bfad_num = (_drv)->inst_no; \
(_entry)->seq_num = (_cnt); \
(_entry)->aen_category = (_cat); \
(_entry)->aen_type = (_evt); \
if ((_drv)->bfad_flags & BFAD_FC4_PROBE_DONE) \
queue_work((_drv)->im->drv_workq, \
&(_drv)->im->aen_im_notify_work); \
} while (0)
struct Scsi_Host *bfad_scsi_host_alloc(struct bfad_im_port_s *im_port,
struct bfad_s *);
bfa_status_t bfad_thread_workq(struct bfad_s *bfad);
void bfad_destroy_workq(struct bfad_im_s *im);
void bfad_fc_host_init(struct bfad_im_port_s *im_port);
void bfad_scsi_host_free(struct bfad_s *bfad,
struct bfad_im_port_s *im_port);
void bfad_ramp_up_qdepth(struct bfad_itnim_s *itnim,
struct scsi_device *sdev);
void bfad_handle_qfull(struct bfad_itnim_s *itnim, struct scsi_device *sdev);
struct bfad_itnim_s *bfad_get_itnim(struct bfad_im_port_s *im_port, int id);
extern struct scsi_host_template bfad_im_scsi_host_template;
extern struct scsi_host_template bfad_im_vport_template;
extern struct fc_function_template bfad_im_fc_function_template;
extern struct fc_function_template bfad_im_vport_fc_function_template;
extern struct scsi_transport_template *bfad_im_scsi_transport_template;
extern struct scsi_transport_template *bfad_im_scsi_vport_transport_template;
extern struct device_attribute *bfad_im_host_attrs[];
extern struct device_attribute *bfad_im_vport_attrs[];
irqreturn_t bfad_intx(int irq, void *dev_id);
int bfad_im_bsg_request(struct fc_bsg_job *job);
int bfad_im_bsg_timeout(struct fc_bsg_job *job);
/*
* Macro to set the SCSI device sdev_bflags - sdev_bflags are used by the
* SCSI mid-layer to choose LUN Scanning mode REPORT_LUNS vs. Sequential Scan
*
* Internally iterate's over all the ITNIM's part of the im_port & set's the
* sdev_bflags for the scsi_device associated with LUN #0.
*/
#define bfad_reset_sdev_bflags(__im_port, __lunmask_cfg) do { \
struct scsi_device *__sdev = NULL; \
struct bfad_itnim_s *__itnim = NULL; \
u32 scan_flags = BLIST_NOREPORTLUN | BLIST_SPARSELUN; \
list_for_each_entry(__itnim, &((__im_port)->itnim_mapped_list), \
list_entry) { \
__sdev = scsi_device_lookup((__im_port)->shost, \
__itnim->channel, \
__itnim->scsi_tgt_id, 0); \
if (__sdev) { \
if ((__lunmask_cfg) == BFA_TRUE) \
__sdev->sdev_bflags |= scan_flags; \
else \
__sdev->sdev_bflags &= ~scan_flags; \
scsi_device_put(__sdev); \
} \
} \
} while (0)
#endif