- 根目录:
- drivers
- staging
- fbtft
- fb_ili9320.c
/*
* FB driver for the ILI9320 LCD Controller
*
* Copyright (C) 2013 Noralf Tronnes
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/delay.h>
#include "fbtft.h"
#define DRVNAME "fb_ili9320"
#define WIDTH 240
#define HEIGHT 320
#define DEFAULT_GAMMA "07 07 6 0 0 0 5 5 4 0\n" \
"07 08 4 7 5 1 2 0 7 7"
static unsigned read_devicecode(struct fbtft_par *par)
{
int ret;
u8 rxbuf[8] = {0, };
write_reg(par, 0x0000);
ret = par->fbtftops.read(par, rxbuf, 4);
return (rxbuf[2] << 8) | rxbuf[3];
}
static int init_display(struct fbtft_par *par)
{
unsigned devcode;
fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, "%s()\n", __func__);
par->fbtftops.reset(par);
devcode = read_devicecode(par);
fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, "Device code: 0x%04X\n",
devcode);
if ((devcode != 0x0000) && (devcode != 0x9320))
dev_warn(par->info->device,
"Unrecognized Device code: 0x%04X (expected 0x9320)\n",
devcode);
/* Initialization sequence from ILI9320 Application Notes */
/* *********** Start Initial Sequence ********* */
write_reg(par, 0x00E5, 0x8000); /* Set the Vcore voltage and this setting is must. */
write_reg(par, 0x0000, 0x0001); /* Start internal OSC. */
write_reg(par, 0x0001, 0x0100); /* set SS and SM bit */
write_reg(par, 0x0002, 0x0700); /* set 1 line inversion */
write_reg(par, 0x0004, 0x0000); /* Resize register */
write_reg(par, 0x0008, 0x0202); /* set the back and front porch */
write_reg(par, 0x0009, 0x0000); /* set non-display area refresh cycle */
write_reg(par, 0x000A, 0x0000); /* FMARK function */
write_reg(par, 0x000C, 0x0000); /* RGB interface setting */
write_reg(par, 0x000D, 0x0000); /* Frame marker Position */
write_reg(par, 0x000F, 0x0000); /* RGB interface polarity */
/* ***********Power On sequence *************** */
write_reg(par, 0x0010, 0x0000); /* SAP, BT[3:0], AP, DSTB, SLP, STB */
write_reg(par, 0x0011, 0x0007); /* DC1[2:0], DC0[2:0], VC[2:0] */
write_reg(par, 0x0012, 0x0000); /* VREG1OUT voltage */
write_reg(par, 0x0013, 0x0000); /* VDV[4:0] for VCOM amplitude */
mdelay(200); /* Dis-charge capacitor power voltage */
write_reg(par, 0x0010, 0x17B0); /* SAP, BT[3:0], AP, DSTB, SLP, STB */
write_reg(par, 0x0011, 0x0031); /* R11h=0x0031 at VCI=3.3V DC1[2:0], DC0[2:0], VC[2:0] */
mdelay(50);
write_reg(par, 0x0012, 0x0138); /* R12h=0x0138 at VCI=3.3V VREG1OUT voltage */
mdelay(50);
write_reg(par, 0x0013, 0x1800); /* R13h=0x1800 at VCI=3.3V VDV[4:0] for VCOM amplitude */
write_reg(par, 0x0029, 0x0008); /* R29h=0x0008 at VCI=3.3V VCM[4:0] for VCOMH */
mdelay(50);
write_reg(par, 0x0020, 0x0000); /* GRAM horizontal Address */
write_reg(par, 0x0021, 0x0000); /* GRAM Vertical Address */
/* ------------------ Set GRAM area --------------- */
write_reg(par, 0x0050, 0x0000); /* Horizontal GRAM Start Address */
write_reg(par, 0x0051, 0x00EF); /* Horizontal GRAM End Address */
write_reg(par, 0x0052, 0x0000); /* Vertical GRAM Start Address */
write_reg(par, 0x0053, 0x013F); /* Vertical GRAM Start Address */
write_reg(par, 0x0060, 0x2700); /* Gate Scan Line */
write_reg(par, 0x0061, 0x0001); /* NDL,VLE, REV */
write_reg(par, 0x006A, 0x0000); /* set scrolling line */
/* -------------- Partial Display Control --------- */
write_reg(par, 0x0080, 0x0000);
write_reg(par, 0x0081, 0x0000);
write_reg(par, 0x0082, 0x0000);
write_reg(par, 0x0083, 0x0000);
write_reg(par, 0x0084, 0x0000);
write_reg(par, 0x0085, 0x0000);
/* -------------- Panel Control ------------------- */
write_reg(par, 0x0090, 0x0010);
write_reg(par, 0x0092, 0x0000);
write_reg(par, 0x0093, 0x0003);
write_reg(par, 0x0095, 0x0110);
write_reg(par, 0x0097, 0x0000);
write_reg(par, 0x0098, 0x0000);
write_reg(par, 0x0007, 0x0173); /* 262K color and display ON */
return 0;
}
static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
{
fbtft_par_dbg(DEBUG_SET_ADDR_WIN, par,
"%s(xs=%d, ys=%d, xe=%d, ye=%d)\n", __func__, xs, ys, xe, ye);
switch (par->info->var.rotate) {
/* R20h = Horizontal GRAM Start Address */
/* R21h = Vertical GRAM Start Address */
case 0:
write_reg(par, 0x0020, xs);
write_reg(par, 0x0021, ys);
break;
case 180:
write_reg(par, 0x0020, WIDTH - 1 - xs);
write_reg(par, 0x0021, HEIGHT - 1 - ys);
break;
case 270:
write_reg(par, 0x0020, WIDTH - 1 - ys);
write_reg(par, 0x0021, xs);
break;
case 90:
write_reg(par, 0x0020, ys);
write_reg(par, 0x0021, HEIGHT - 1 - xs);
break;
}
write_reg(par, 0x0022); /* Write Data to GRAM */
}
static int set_var(struct fbtft_par *par)
{
fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, "%s()\n", __func__);
switch (par->info->var.rotate) {
case 0:
write_reg(par, 0x3, (par->bgr << 12) | 0x30);
break;
case 270:
write_reg(par, 0x3, (par->bgr << 12) | 0x28);
break;
case 180:
write_reg(par, 0x3, (par->bgr << 12) | 0x00);
break;
case 90:
write_reg(par, 0x3, (par->bgr << 12) | 0x18);
break;
}
return 0;
}
/*
Gamma string format:
VRP0 VRP1 RP0 RP1 KP0 KP1 KP2 KP3 KP4 KP5
VRN0 VRN1 RN0 RN1 KN0 KN1 KN2 KN3 KN4 KN5
*/
#define CURVE(num, idx) curves[num*par->gamma.num_values + idx]
static int set_gamma(struct fbtft_par *par, unsigned long *curves)
{
unsigned long mask[] = {
0x1f, 0x1f, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
0x1f, 0x1f, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
};
int i, j;
fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, "%s()\n", __func__);
/* apply mask */
for (i = 0; i < 2; i++)
for (j = 0; j < 10; j++)
CURVE(i, j) &= mask[i*par->gamma.num_values + j];
write_reg(par, 0x0030, CURVE(0, 5) << 8 | CURVE(0, 4));
write_reg(par, 0x0031, CURVE(0, 7) << 8 | CURVE(0, 6));
write_reg(par, 0x0032, CURVE(0, 9) << 8 | CURVE(0, 8));
write_reg(par, 0x0035, CURVE(0, 3) << 8 | CURVE(0, 2));
write_reg(par, 0x0036, CURVE(0, 1) << 8 | CURVE(0, 0));
write_reg(par, 0x0037, CURVE(1, 5) << 8 | CURVE(1, 4));
write_reg(par, 0x0038, CURVE(1, 7) << 8 | CURVE(1, 6));
write_reg(par, 0x0039, CURVE(1, 9) << 8 | CURVE(1, 8));
write_reg(par, 0x003C, CURVE(1, 3) << 8 | CURVE(1, 2));
write_reg(par, 0x003D, CURVE(1, 1) << 8 | CURVE(1, 0));
return 0;
}
#undef CURVE
static struct fbtft_display display = {
.regwidth = 16,
.width = WIDTH,
.height = HEIGHT,
.gamma_num = 2,
.gamma_len = 10,
.gamma = DEFAULT_GAMMA,
.fbtftops = {
.init_display = init_display,
.set_addr_win = set_addr_win,
.set_var = set_var,
.set_gamma = set_gamma,
},
};
FBTFT_REGISTER_DRIVER(DRVNAME, "ilitek,ili9320", &display);
MODULE_ALIAS("spi:" DRVNAME);
MODULE_ALIAS("platform:" DRVNAME);
MODULE_ALIAS("spi:ili9320");
MODULE_ALIAS("platform:ili9320");
MODULE_DESCRIPTION("FB driver for the ILI9320 LCD Controller");
MODULE_AUTHOR("Noralf Tronnes");
MODULE_LICENSE("GPL");