NVIDIA GK20A Graphics Processing Unit

Required properties:
- compatible: "nvidia,<chip>-<gpu>"
  Currently recognized values:
  - nvidia,tegra124-gk20a
- reg: Physical base address and length of the controller's registers.
  Must contain two entries:
  - first entry for bar0
  - second entry for bar1
- interrupts: Must contain an entry for each entry in interrupt-names.
  See ../interrupt-controller/interrupts.txt for details.
- interrupt-names: Must include the following entries:
  - stall
  - nonstall
- vdd-supply: regulator for supply voltage.
- clocks: Must contain an entry for each entry in clock-names.
  See ../clocks/clock-bindings.txt for details.
- clock-names: Must include the following entries:
  - gpu
  - pwr
- resets: Must contain an entry for each entry in reset-names.
  See ../reset/reset.txt for details.
- reset-names: Must include the following entries:
  - gpu

Example:

	gpu@0,57000000 {
		compatible = "nvidia,gk20a";
		reg = <0x0 0x57000000 0x0 0x01000000>,
		      <0x0 0x58000000 0x0 0x01000000>;
		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-names = "stall", "nonstall";
		vdd-supply = <&vdd_gpu>;
		clocks = <&tegra_car TEGRA124_CLK_GPU>,
			 <&tegra_car TEGRA124_CLK_PLL_P_OUT5>;
		clock-names = "gpu", "pwr";
		resets = <&tegra_car 184>;
		reset-names = "gpu";
		status = "disabled";
	};