/*
* linux/arch/alpha/kernel/core_apecs.c
*
* Rewritten for Apecs from the lca.c from:
*
* Written by David Mosberger (davidm@cs.arizona.edu) with some code
* taken from Dave Rusling's (david.rusling@reo.mts.dec.com) 32-bit
* bios code.
*
* Code common to all APECS core logic chips.
*/
#define __EXTERN_INLINE inline
#include <asm/io.h>
#include <asm/core_apecs.h>
#undef __EXTERN_INLINE
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <asm/ptrace.h>
#include <asm/smp.h>
#include <asm/mce.h>
#include "proto.h"
#include "pci_impl.h"
/*
* NOTE: Herein lie back-to-back mb instructions. They are magic.
* One plausible explanation is that the i/o controller does not properly
* handle the system transaction. Another involves timing. Ho hum.
*/
/*
* BIOS32-style PCI interface:
*/
#define DEBUG_CONFIG 0
#if DEBUG_CONFIG
# define DBGC(args) printk args
#else
# define DBGC(args)
#endif
#define vuip volatile unsigned int *
/*
* Given a bus, device, and function number, compute resulting
* configuration space address and setup the APECS_HAXR2 register
* accordingly. It is therefore not safe to have concurrent
* invocations to configuration space access routines, but there
* really shouldn't be any need for this.
*
* Type 0:
*
* 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
* 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | | | | | | | | | | | | | | | | | | | | | | | |F|F|F|R|R|R|R|R|R|0|0|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
*
* 31:11 Device select bit.
* 10:8 Function number
* 7:2 Register number
*
* Type 1:
*
* 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
* 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
*
* 31:24 reserved
* 23:16 bus number (8 bits = 128 possible buses)
* 15:11 Device number (5 bits)
* 10:8 function number
* 7:2 register number
*
* Notes:
* The function number selects which function of a multi-function device
* (e.g., SCSI and Ethernet).
*
* The register selects a DWORD (32 bit) register offset. Hence it
* doesn't get shifted by 2 bits as we want to "drop" the bottom two
* bits.
*/
static int
mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
unsigned long *pci_addr, unsigned char *type1)
{
unsigned long addr;
u8 bus = pbus->number;
DBGC(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x,"
" pci_addr=0x%p, type1=0x%p)\n",
bus, device_fn, where, pci_addr, type1));
if (bus == 0) {
int device = device_fn >> 3;
/* type 0 configuration cycle: */
if (device > 20) {
DBGC(("mk_conf_addr: device (%d) > 20, returning -1\n",
device));
return -1;
}
*type1 = 0;
addr = (device_fn << 8) | (where);
} else {
/* type 1 configuration cycle: */
*type1 = 1;
addr = (bus << 16) | (device_fn << 8) | (where);
}
*pci_addr = addr;
DBGC(("mk_conf_addr: returning pci_addr 0x%lx\n", addr));
return 0;
}
static unsigned int
conf_read(unsigned long addr, unsigned char type1)
{
unsigned long flags;
unsigned int stat0, value;
unsigned int haxr2 = 0;
local_irq_save(flags); /* avoid getting hit by machine check */
DBGC(("conf_read(addr=0x%lx, type1=%d)\n", addr, type1));
/* Reset status register to avoid losing errors. */
stat0 = *(vuip)APECS_IOC_DCSR;
*(vuip)APECS_IOC_DCSR = stat0;
mb();
DBGC(("conf_read: APECS DCSR was 0x%x\n", stat0));
/* If Type1 access, must set HAE #2. */
if (type1) {
haxr2 = *(vuip)APECS_IOC_HAXR2;
mb();
*(vuip)APECS_IOC_HAXR2 = haxr2 | 1;
DBGC(("conf_read: TYPE1 access\n"));
}
draina();
mcheck_expected(0) = 1;
mcheck_taken(0) = 0;
mb();
/* Access configuration space. */
/* Some SRMs step on these registers during a machine check. */
asm volatile("ldl %0,%1; mb; mb" : "=r"(value) : "m"(*(vuip)addr)
: "$9", "$10", "$11", "$12", "$13", "$14", "memory");
if (mcheck_taken(0)) {
mcheck_taken(0) = 0;
value = 0xffffffffU;
mb();
}
mcheck_expected(0) = 0;
mb();
#if 1
/*
* david.rusling@reo.mts.dec.com. This code is needed for the
* EB64+ as it does not generate a machine check (why I don't
* know). When we build kernels for one particular platform
* then we can make this conditional on the type.
*/
draina();
/* Now look for any errors. */
stat0 = *(vuip)APECS_IOC_DCSR;
DBGC(("conf_read: APECS DCSR after read 0x%x\n", stat0));
/* Is any error bit set? */
if (stat0 & 0xffe0U) {
/* If not NDEV, print status. */
if (!(stat0 & 0x0800)) {
printk("apecs.c:conf_read: got stat0=%x\n", stat0);
}
/* Reset error status. */
*(vuip)APECS_IOC_DCSR = stat0;
mb();
wrmces(0x7); /* reset machine check */
value = 0xffffffff;
}
#endif
/* If Type1 access, must reset HAE #2 so normal IO space ops work. */
if (type1) {
*(vuip)APECS_IOC_HAXR2 = haxr2 & ~1;
mb();
}
local_irq_restore(flags);
return value;
}
static void
conf_write(unsigned long addr, unsigned int value, unsigned char type1)
{
unsigned long flags;
unsigned int stat0;
unsigned int haxr2 = 0;
local_irq_save(flags); /* avoid getting hit by machine check */
/* Reset status register to avoid losing errors. */
stat0 = *(vuip)APECS_IOC_DCSR;
*(vuip)APECS_IOC_DCSR = stat0;
mb();
/* If Type1 access, must set HAE #2. */
if (type1) {
haxr2 = *(vuip)APECS_IOC_HAXR2;
mb();
*(vuip)APECS_IOC_HAXR2 = haxr2 | 1;
}
draina();
mcheck_expected(0) = 1;
mb();
/* Access configuration space. */
*(vuip)addr = value;
mb();
mb(); /* magic */
mcheck_expected(0) = 0;
mb();
#if 1
/*
* david.rusling@reo.mts.dec.com. This code is needed for the
* EB64+ as it does not generate a machine check (why I don't
* know). When we build kernels for one particular platform
* then we can make this conditional on the type.
*/
draina();
/* Now look for any errors. */
stat0 = *(vuip)APECS_IOC_DCSR;
/* Is any error bit set? */
if (stat0 & 0xffe0U) {
/* If not NDEV, print status. */
if (!(stat0 & 0x0800)) {
printk("apecs.c:conf_write: got stat0=%x\n", stat0);
}
/* Reset error status. */
*(vuip)APECS_IOC_DCSR = stat0;
mb();
wrmces(0x7); /* reset machine check */
}
#endif
/* If Type1 access, must reset HAE #2 so normal IO space ops work. */
if (type1) {
*(vuip)APECS_IOC_HAXR2 = haxr2 & ~1;
mb();
}
local_irq_restore(flags);
}
static int
apecs_read_config(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 *value)
{
unsigned long addr, pci_addr;
unsigned char type1;
long mask;
int shift;
if (mk_conf_addr(bus, devfn, where, &pci_addr, &type1))
return PCIBIOS_DEVICE_NOT_FOUND;
mask = (size - 1) * 8;
shift = (where & 3) * 8;
addr = (pci_addr << 5) + mask + APECS_CONF;
*value = conf_read(addr, type1) >> (shift);
return PCIBIOS_SUCCESSFUL;
}
static int
apecs_write_config(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 value)
{
unsigned long addr, pci_addr;
unsigned char type1;
long mask;
if (mk_conf_addr(bus, devfn, where, &pci_addr, &type1))
return PCIBIOS_DEVICE_NOT_FOUND;
mask = (size - 1) * 8;
addr = (pci_addr << 5) + mask + APECS_CONF;
conf_write(addr, value << ((where & 3) * 8), type1);
return PCIBIOS_SUCCESSFUL;
}
struct pci_ops apecs_pci_ops =
{
.read = apecs_read_config,
.write = apecs_write_config,
};
void
apecs_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
{
wmb();
*(vip)APECS_IOC_TBIA = 0;
mb();
}
void __init
apecs_init_arch(void)
{
struct pci_controller *hose;
/*
* Create our single hose.
*/
pci_isa_hose = hose = alloc_pci_controller();
hose->io_space = &ioport_resource;
hose->mem_space = &iomem_resource;
hose->index = 0;
hose->sparse_mem_base = APECS_SPARSE_MEM - IDENT_ADDR;
hose->dense_mem_base = APECS_DENSE_MEM - IDENT_ADDR;
hose->sparse_io_base = APECS_IO - IDENT_ADDR;
hose->dense_io_base = 0;
/*
* Set up the PCI to main memory translation windows.
*
* Window 1 is direct access 1GB at 1GB
* Window 2 is scatter-gather 8MB at 8MB (for isa)
*/
hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000, 0);
hose->sg_pci = NULL;
__direct_map_base = 0x40000000;
__direct_map_size = 0x40000000;
*(vuip)APECS_IOC_PB1R = __direct_map_base | 0x00080000;
*(vuip)APECS_IOC_PM1R = (__direct_map_size - 1) & 0xfff00000U;
*(vuip)APECS_IOC_TB1R = 0;
*(vuip)APECS_IOC_PB2R = hose->sg_isa->dma_base | 0x000c0000;
*(vuip)APECS_IOC_PM2R = (hose->sg_isa->size - 1) & 0xfff00000;
*(vuip)APECS_IOC_TB2R = virt_to_phys(hose->sg_isa->ptes) >> 1;
apecs_pci_tbi(hose, 0, -1);
/*
* Finally, clear the HAXR2 register, which gets used
* for PCI Config Space accesses. That is the way
* we want to use it, and we do not want to depend on
* what ARC or SRM might have left behind...
*/
*(vuip)APECS_IOC_HAXR2 = 0;
mb();
}
void
apecs_pci_clr_err(void)
{
unsigned int jd;
jd = *(vuip)APECS_IOC_DCSR;
if (jd & 0xffe0L) {
*(vuip)APECS_IOC_SEAR;
*(vuip)APECS_IOC_DCSR = jd | 0xffe1L;
mb();
*(vuip)APECS_IOC_DCSR;
}
*(vuip)APECS_IOC_TBIA = (unsigned int)APECS_IOC_TBIA;
mb();
*(vuip)APECS_IOC_TBIA;
}
void
apecs_machine_check(unsigned long vector, unsigned long la_ptr)
{
struct el_common *mchk_header;
struct el_apecs_procdata *mchk_procdata;
struct el_apecs_sysdata_mcheck *mchk_sysdata;
mchk_header = (struct el_common *)la_ptr;
mchk_procdata = (struct el_apecs_procdata *)
(la_ptr + mchk_header->proc_offset
- sizeof(mchk_procdata->paltemp));
mchk_sysdata = (struct el_apecs_sysdata_mcheck *)
(la_ptr + mchk_header->sys_offset);
/* Clear the error before any reporting. */
mb();
mb(); /* magic */
draina();
apecs_pci_clr_err();
wrmces(0x7); /* reset machine check pending flag */
mb();
process_mcheck_info(vector, la_ptr, "APECS",
(mcheck_expected(0)
&& (mchk_sysdata->epic_dcsr & 0x0c00UL)));
}