/*
* Copyright 2013-2014 Freescale Semiconductor, Inc.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public
* License along with this file; if not, write to the Free
* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
* MA 02110-1301 USA
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "ls1021a.dtsi"
/ {
model = "LS1021A QDS Board";
aliases {
enet0_rgmii_phy = &rgmii_phy1;
enet1_rgmii_phy = &rgmii_phy2;
enet2_rgmii_phy = &rgmii_phy3;
enet0_sgmii_phy = &sgmii_phy1c;
enet1_sgmii_phy = &sgmii_phy1d;
};
sys_mclk: clock-mclk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24576000>;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_3p3v: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
sound {
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
simple-audio-card,widgets =
"Microphone", "Microphone Jack",
"Headphone", "Headphone Jack",
"Speaker", "Speaker Ext",
"Line", "Line In Jack";
simple-audio-card,routing =
"MIC_IN", "Microphone Jack",
"Microphone Jack", "Mic Bias",
"LINE_IN", "Line In Jack",
"Headphone Jack", "HP_OUT",
"Speaker Ext", "LINE_OUT";
simple-audio-card,cpu {
sound-dai = <&sai2>;
frame-master;
bitclock-master;
};
simple-audio-card,codec {
sound-dai = <&codec>;
frame-master;
bitclock-master;
};
};
};
&dspi0 {
bus-num = <0>;
status = "okay";
dspiflash: at45db021d@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "atmel,at45db021d", "atmel,at45", "atmel,dataflash";
spi-max-frequency = <16000000>;
spi-cpol;
spi-cpha;
reg = <0>;
};
};
&enet0 {
tbi-handle = <&tbi0>;
phy-handle = <&sgmii_phy1c>;
phy-connection-type = "sgmii";
status = "okay";
};
&enet1 {
tbi-handle = <&tbi0>;
phy-handle = <&sgmii_phy1d>;
phy-connection-type = "sgmii";
status = "okay";
};
&enet2 {
phy-handle = <&rgmii_phy3>;
phy-connection-type = "rgmii-id";
status = "okay";
};
&i2c0 {
status = "okay";
pca9547: mux@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
#size-cells = <0>;
i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0>;
ds3232: rtc@68 {
compatible = "dallas,ds3232";
reg = <0x68>;
interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
};
};
i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x2>;
ina220@40 {
compatible = "ti,ina220";
reg = <0x40>;
shunt-resistor = <1000>;
};
ina220@41 {
compatible = "ti,ina220";
reg = <0x41>;
shunt-resistor = <1000>;
};
};
i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x3>;
eeprom@56 {
compatible = "atmel,24c512";
reg = <0x56>;
};
eeprom@57 {
compatible = "atmel,24c512";
reg = <0x57>;
};
adt7461a@4c {
compatible = "adi,adt7461a";
reg = <0x4c>;
};
};
i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x4>;
codec: sgtl5000@2a {
#sound-dai-cells = <0>;
compatible = "fsl,sgtl5000";
reg = <0x2a>;
VDDA-supply = <®_3p3v>;
VDDIO-supply = <®_3p3v>;
clocks = <&sys_mclk 1>;
};
};
};
};
&ifc {
#address-cells = <2>;
#size-cells = <1>;
/* NOR, NAND Flashes and FPGA on board */
ranges = <0x0 0x0 0x0 0x60000000 0x08000000
0x2 0x0 0x0 0x7e800000 0x00010000
0x3 0x0 0x0 0x7fb00000 0x00000100>;
status = "okay";
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
};
fpga: board-control@3,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
reg = <0x3 0x0 0x0000100>;
bank-width = <1>;
device-width = <1>;
ranges = <0 3 0 0x100>;
mdio-mux-emi1 {
compatible = "mdio-mux-mmioreg";
mdio-parent-bus = <&mdio0>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x54 1>; /* BRDCFG4 */
mux-mask = <0xe0>; /* EMI1[2:0] */
/* Onboard PHYs */
ls1021amdio0: mdio@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
rgmii_phy1: ethernet-phy@1 {
reg = <0x1>;
};
};
ls1021amdio1: mdio@20 {
reg = <0x20>;
#address-cells = <1>;
#size-cells = <0>;
rgmii_phy2: ethernet-phy@2 {
reg = <0x2>;
};
};
ls1021amdio2: mdio@40 {
reg = <0x40>;
#address-cells = <1>;
#size-cells = <0>;
rgmii_phy3: ethernet-phy@3 {
reg = <0x3>;
};
};
ls1021amdio3: mdio@60 {
reg = <0x60>;
#address-cells = <1>;
#size-cells = <0>;
sgmii_phy1c: ethernet-phy@1c {
reg = <0x1c>;
};
};
ls1021amdio4: mdio@80 {
reg = <0x80>;
#address-cells = <1>;
#size-cells = <0>;
sgmii_phy1d: ethernet-phy@1d {
reg = <0x1d>;
};
};
};
};
};
&lpuart0 {
status = "okay";
};
&mdio0 {
tbi0: tbi-phy@8 {
reg = <0x8>;
device_type = "tbi-phy";
};
};
&sai2 {
status = "okay";
};
&uart0 {
status = "okay";
};
&uart1 {
status = "okay";
};