/*
* Copyright (c) 2014 MediaTek Inc.
* Author: Joe.C <yingjoe.chen@mediatek.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <dt-bindings/clock/mt8135-clk.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset-controller/mt8135-resets.h>
#include "skeleton64.dtsi"
#include "mt8135-pinfunc.h"
/ {
compatible = "mediatek,mt8135";
interrupt-parent = <&sysirq>;
cpu-map {
cluster0 {
core0 {
cpu = <&cpu0>;
};
core1 {
cpu = <&cpu1>;
};
};
cluster1 {
core0 {
cpu = <&cpu2>;
};
core1 {
cpu = <&cpu3>;
};
};
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
enable-method = "mediatek,mt81xx-tz-smp";
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x000>;
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x001>;
};
cpu2: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x100>;
};
cpu3: cpu@101 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x101>;
};
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
trustzone-bootinfo@80002000 {
compatible = "mediatek,trustzone-bootinfo";
reg = <0 0x80002000 0 0x1000>;
};
};
clocks {
#address-cells = <2>;
#size-cells = <2>;
compatible = "simple-bus";
ranges;
system_clk: dummy13m {
compatible = "fixed-clock";
clock-frequency = <13000000>;
#clock-cells = <0>;
};
rtc_clk: dummy32k {
compatible = "fixed-clock";
clock-frequency = <32000>;
#clock-cells = <0>;
};
clk26m: clk26m {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <26000000>;
};
};
timer {
compatible = "arm,armv7-timer";
interrupt-parent = <&gic>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
IRQ_TYPE_LEVEL_LOW)>;
clock-frequency = <13000000>;
arm,cpu-registers-not-fw-configured;
};
soc {
#address-cells = <2>;
#size-cells = <2>;
compatible = "simple-bus";
ranges;
topckgen: topckgen@10000000 {
compatible = "mediatek,mt8135-topckgen";
reg = <0 0x10000000 0 0x1000>;
#clock-cells = <1>;
};
infracfg: infracfg@10001000 {
#reset-cells = <1>;
#clock-cells = <1>;
compatible = "mediatek,mt8135-infracfg", "syscon";
reg = <0 0x10001000 0 0x1000>;
};
pericfg: pericfg@10003000 {
#reset-cells = <1>;
#clock-cells = <1>;
compatible = "mediatek,mt8135-pericfg", "syscon";
reg = <0 0x10003000 0 0x1000>;
};
/*
* Pinctrl access register at 0x10005000 and 0x1020c000 through
* regmap. Register 0x1000b000 is used by EINT.
*/
pio: pinctrl@10005000 {
compatible = "mediatek,mt8135-pinctrl";
reg = <0 0x1000b000 0 0x1000>;
mediatek,pctl-regmap = <&syscfg_pctl_a &syscfg_pctl_b>;
pins-are-numbered;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
};
syscfg_pctl_a: syscfg_pctl_a@10005000 {
compatible = "mediatek,mt8135-pctl-a-syscfg", "syscon";
reg = <0 0x10005000 0 0x1000>;
};
timer: timer@10008000 {
compatible = "mediatek,mt8135-timer",
"mediatek,mt6577-timer";
reg = <0 0x10008000 0 0x80>;
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>;
clocks = <&system_clk>, <&rtc_clk>;
clock-names = "system-clk", "rtc-clk";
};
pwrap: pwrap@1000f000 {
compatible = "mediatek,mt8135-pwrap";
reg = <0 0x1000f000 0 0x1000>,
<0 0x11017000 0 0x1000>;
reg-names = "pwrap", "pwrap-bridge";
interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
resets = <&infracfg MT8135_INFRA_PMIC_WRAP_RST>,
<&pericfg MT8135_PERI_PWRAP_BRIDGE_SW_RST>;
reset-names = "pwrap", "pwrap-bridge";
clocks = <&clk26m>, <&clk26m>;
clock-names = "spi", "wrap";
};
sysirq: interrupt-controller@10200030 {
compatible = "mediatek,mt8135-sysirq",
"mediatek,mt6577-sysirq";
interrupt-controller;
#interrupt-cells = <3>;
interrupt-parent = <&gic>;
reg = <0 0x10200030 0 0x1c>;
};
apmixedsys: apmixedsys@10209000 {
compatible = "mediatek,mt8135-apmixedsys";
reg = <0 0x10209000 0 0x1000>;
#clock-cells = <1>;
};
syscfg_pctl_b: syscfg_pctl_b@1020c000 {
compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon";
reg = <0 0x1020c000 0 0x1000>;
};
gic: interrupt-controller@10211000 {
compatible = "arm,cortex-a15-gic";
interrupt-controller;
#interrupt-cells = <3>;
interrupt-parent = <&gic>;
reg = <0 0x10211000 0 0x1000>,
<0 0x10212000 0 0x1000>,
<0 0x10214000 0 0x2000>,
<0 0x10216000 0 0x2000>;
};
uart0: serial@11006000 {
compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
reg = <0 0x11006000 0 0x400>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>;
clock-names = "baud", "bus";
status = "disabled";
};
uart1: serial@11007000 {
compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
reg = <0 0x11007000 0 0x400>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>;
clock-names = "baud", "bus";
status = "disabled";
};
uart2: serial@11008000 {
compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
reg = <0 0x11008000 0 0x400>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>;
clock-names = "baud", "bus";
status = "disabled";
};
uart3: serial@11009000 {
compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
reg = <0 0x11009000 0 0x400>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>;
clock-names = "baud", "bus";
status = "disabled";
};
};
};