/* * Copyright (C) 2013-2015 Freescale Semiconductor, Inc. * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License * Version 2 or later at the following locations: * * http://www.opensource.org/licenses/gpl-license.html * http://www.gnu.org/copyleft/gpl.html */ #include <linux/err.h> #include <linux/io.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/mfd/syscon.h> #include <linux/regmap.h> #include "common.h" #include "hardware.h" #define REG_SET 0x4 #define REG_CLR 0x8 #define ANADIG_REG_2P5 0x130 #define ANADIG_REG_CORE 0x140 #define ANADIG_ANA_MISC0 0x150 #define ANADIG_USB1_CHRG_DETECT 0x1b0 #define ANADIG_USB2_CHRG_DETECT 0x210 #define ANADIG_DIGPROG 0x260 #define ANADIG_DIGPROG_IMX6SL 0x280 #define ANADIG_DIGPROG_IMX7D 0x800 #define BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG 0x40000 #define BM_ANADIG_REG_2P5_ENABLE_PULLDOWN 0x8 #define BM_ANADIG_REG_CORE_FET_ODRIVE 0x20000000 #define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG 0x1000 /* Below MISC0_DISCON_HIGH_SNVS is only for i.MX6SL */ #define BM_ANADIG_ANA_MISC0_DISCON_HIGH_SNVS 0x2000 #define BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B 0x80000 #define BM_ANADIG_USB_CHRG_DETECT_EN_B 0x100000 static struct regmap *anatop; static void imx_anatop_enable_weak2p5(bool enable) { u32 reg, val; regmap_read(anatop, ANADIG_ANA_MISC0, &val); /* can only be enabled when stop_mode_config is clear. */ reg = ANADIG_REG_2P5; reg += (enable && (val & BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG) == 0) ? REG_SET : REG_CLR; regmap_write(anatop, reg, BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG); } static void imx_anatop_enable_fet_odrive(bool enable) { regmap_write(anatop, ANADIG_REG_CORE + (enable ? REG_SET : REG_CLR), BM_ANADIG_REG_CORE_FET_ODRIVE); } static inline void imx_anatop_enable_2p5_pulldown(bool enable) { regmap_write(anatop, ANADIG_REG_2P5 + (enable ? REG_SET : REG_CLR), BM_ANADIG_REG_2P5_ENABLE_PULLDOWN); } static inline void imx_anatop_disconnect_high_snvs(bool enable) { regmap_write(anatop, ANADIG_ANA_MISC0 + (enable ? REG_SET : REG_CLR), BM_ANADIG_ANA_MISC0_DISCON_HIGH_SNVS); } void imx_anatop_pre_suspend(void) { if (imx_mmdc_get_ddr_type() == IMX_DDR_TYPE_LPDDR2) imx_anatop_enable_2p5_pulldown(true); else imx_anatop_enable_weak2p5(true); imx_anatop_enable_fet_odrive(true); if (cpu_is_imx6sl()) imx_anatop_disconnect_high_snvs(true); } void imx_anatop_post_resume(void) { if (imx_mmdc_get_ddr_type() == IMX_DDR_TYPE_LPDDR2) imx_anatop_enable_2p5_pulldown(false); else imx_anatop_enable_weak2p5(false); imx_anatop_enable_fet_odrive(false); if (cpu_is_imx6sl()) imx_anatop_disconnect_high_snvs(false); } static void imx_anatop_usb_chrg_detect_disable(void) { regmap_write(anatop, ANADIG_USB1_CHRG_DETECT, BM_ANADIG_USB_CHRG_DETECT_EN_B | BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B); regmap_write(anatop, ANADIG_USB2_CHRG_DETECT, BM_ANADIG_USB_CHRG_DETECT_EN_B | BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B); } void __init imx_init_revision_from_anatop(void) { struct device_node *np; void __iomem *anatop_base; unsigned int revision; u32 digprog; u16 offset = ANADIG_DIGPROG; np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop"); anatop_base = of_iomap(np, 0); WARN_ON(!anatop_base); if (of_device_is_compatible(np, "fsl,imx6sl-anatop")) offset = ANADIG_DIGPROG_IMX6SL; if (of_device_is_compatible(np, "fsl,imx7d-anatop")) offset = ANADIG_DIGPROG_IMX7D; digprog = readl_relaxed(anatop_base + offset); iounmap(anatop_base); switch (digprog & 0xff) { case 0: revision = IMX_CHIP_REVISION_1_0; break; case 1: revision = IMX_CHIP_REVISION_1_1; break; case 2: revision = IMX_CHIP_REVISION_1_2; break; case 3: revision = IMX_CHIP_REVISION_1_3; break; case 4: revision = IMX_CHIP_REVISION_1_4; break; case 5: /* * i.MX6DQ TO1.5 is defined as Rev 1.3 in Data Sheet, marked * as 'D' in Part Number last character. */ revision = IMX_CHIP_REVISION_1_5; break; default: revision = IMX_CHIP_REVISION_UNKNOWN; } mxc_set_cpu_type(digprog >> 16 & 0xff); imx_set_soc_revision(revision); } void __init imx_anatop_init(void) { anatop = syscon_regmap_lookup_by_compatible("fsl,imx6q-anatop"); if (IS_ERR(anatop)) { pr_err("%s: failed to find imx6q-anatop regmap!\n", __func__); return; } imx_anatop_usb_chrg_detect_disable(); }