/* * arch/arm/mach-ks8695/time.c * * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk> * Copyright (C) 2006 Simtec Electronics * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/kernel.h> #include <linux/sched.h> #include <linux/io.h> #include <linux/clockchips.h> #include <asm/mach/time.h> #include <asm/system_misc.h> #include <mach/regs-irq.h> #include "generic.h" #define KS8695_TMR_OFFSET (0xF0000 + 0xE400) #define KS8695_TMR_VA (KS8695_IO_VA + KS8695_TMR_OFFSET) #define KS8695_TMR_PA (KS8695_IO_PA + KS8695_TMR_OFFSET) /* * Timer registers */ #define KS8695_TMCON (0x00) /* Timer Control Register */ #define KS8695_T1TC (0x04) /* Timer 1 Timeout Count Register */ #define KS8695_T0TC (0x08) /* Timer 0 Timeout Count Register */ #define KS8695_T1PD (0x0C) /* Timer 1 Pulse Count Register */ #define KS8695_T0PD (0x10) /* Timer 0 Pulse Count Register */ /* Timer Control Register */ #define TMCON_T1EN (1 << 1) /* Timer 1 Enable */ #define TMCON_T0EN (1 << 0) /* Timer 0 Enable */ /* Timer0 Timeout Counter Register */ #define T0TC_WATCHDOG (0xff) /* Enable watchdog mode */ static int ks8695_set_periodic(struct clock_event_device *evt) { u32 rate = DIV_ROUND_CLOSEST(KS8695_CLOCK_RATE, HZ); u32 half = DIV_ROUND_CLOSEST(rate, 2); u32 tmcon; /* Disable timer 1 */ tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON); tmcon &= ~TMCON_T1EN; writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON); /* Both registers need to count down */ writel_relaxed(half, KS8695_TMR_VA + KS8695_T1TC); writel_relaxed(half, KS8695_TMR_VA + KS8695_T1PD); /* Re-enable timer1 */ tmcon |= TMCON_T1EN; writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON); return 0; } static int ks8695_set_next_event(unsigned long cycles, struct clock_event_device *evt) { u32 half = DIV_ROUND_CLOSEST(cycles, 2); u32 tmcon; /* Disable timer 1 */ tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON); tmcon &= ~TMCON_T1EN; writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON); /* Both registers need to count down */ writel_relaxed(half, KS8695_TMR_VA + KS8695_T1TC); writel_relaxed(half, KS8695_TMR_VA + KS8695_T1PD); /* Re-enable timer1 */ tmcon |= TMCON_T1EN; writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON); return 0; } static struct clock_event_device clockevent_ks8695 = { .name = "ks8695_t1tc", /* Reasonably fast and accurate clock event */ .rating = 300, .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC, .set_next_event = ks8695_set_next_event, .set_state_periodic = ks8695_set_periodic, }; /* * IRQ handler for the timer. */ static irqreturn_t ks8695_timer_interrupt(int irq, void *dev_id) { struct clock_event_device *evt = &clockevent_ks8695; evt->event_handler(evt); return IRQ_HANDLED; } static struct irqaction ks8695_timer_irq = { .name = "ks8695_tick", .flags = IRQF_TIMER, .handler = ks8695_timer_interrupt, }; static void ks8695_timer_setup(void) { unsigned long tmcon; /* Disable timer 0 and 1 */ tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON); tmcon &= ~TMCON_T0EN; tmcon &= ~TMCON_T1EN; writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON); /* * Use timer 1 to fire IRQs on the timeline, minimum 2 cycles * (one on each counter) maximum 2*2^32, but the API will only * accept up to a 32bit full word (0xFFFFFFFFU). */ clockevents_config_and_register(&clockevent_ks8695, KS8695_CLOCK_RATE, 2, 0xFFFFFFFFU); } void __init ks8695_timer_init(void) { ks8695_timer_setup(); /* Enable timer interrupts */ setup_irq(KS8695_IRQ_TIMER1, &ks8695_timer_irq); } void ks8695_restart(enum reboot_mode reboot_mode, const char *cmd) { unsigned int reg; if (reboot_mode == REBOOT_SOFT) soft_restart(0); /* disable timer0 */ reg = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON); writel_relaxed(reg & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); /* enable watchdog mode */ writel_relaxed((10 << 8) | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC); /* re-enable timer0 */ writel_relaxed(reg | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); }