/*
* sata_inic162x.c - Driver for Initio 162x SATA controllers
*
* Copyright 2006 SUSE Linux Products GmbH
* Copyright 2006 Tejun Heo <teheo@novell.com>
*
* This file is released under GPL v2.
*
* **** WARNING ****
*
* This driver never worked properly and unfortunately data corruption is
* relatively common. There isn't anyone working on the driver and there's
* no support from the vendor. Do not use this driver in any production
* environment.
*
* http://thread.gmane.org/gmane.linux.debian.devel.bugs.rc/378525/focus=54491
* https://bugzilla.kernel.org/show_bug.cgi?id=60565
*
* *****************
*
* This controller is eccentric and easily locks up if something isn't
* right. Documentation is available at initio's website but it only
* documents registers (not programming model).
*
* This driver has interesting history. The first version was written
* from the documentation and a 2.4 IDE driver posted on a Taiwan
* company, which didn't use any IDMA features and couldn't handle
* LBA48. The resulting driver couldn't handle LBA48 devices either
* making it pretty useless.
*
* After a while, initio picked the driver up, renamed it to
* sata_initio162x, updated it to use IDMA for ATA DMA commands and
* posted it on their website. It only used ATA_PROT_DMA for IDMA and
* attaching both devices and issuing IDMA and !IDMA commands
* simultaneously broke it due to PIRQ masking interaction but it did
* show how to use the IDMA (ADMA + some initio specific twists)
* engine.
*
* Then, I picked up their changes again and here's the usable driver
* which uses IDMA for everything. Everything works now including
* LBA48, CD/DVD burning, suspend/resume and hotplug. There are some
* issues tho. Result Tf is not resported properly, NCQ isn't
* supported yet and CD/DVD writing works with DMA assisted PIO
* protocol (which, for native SATA devices, shouldn't cause any
* noticeable difference).
*
* Anyways, so, here's finally a working driver for inic162x. Enjoy!
*
* initio: If you guys wanna improve the driver regarding result TF
* access and other stuff, please feel free to contact me. I'll be
* happy to assist.
*/
#include <linux/gfp.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#include <linux/blkdev.h>
#include <scsi/scsi_device.h>
#define DRV_NAME "sata_inic162x"
#define DRV_VERSION "0.4"
enum {
MMIO_BAR_PCI = 5,
MMIO_BAR_CARDBUS = 1,
NR_PORTS = 2,
IDMA_CPB_TBL_SIZE = 4 * 32,
INIC_DMA_BOUNDARY = 0xffffff,
HOST_ACTRL = 0x08,
HOST_CTL = 0x7c,
HOST_STAT = 0x7e,
HOST_IRQ_STAT = 0xbc,
HOST_IRQ_MASK = 0xbe,
PORT_SIZE = 0x40,
/* registers for ATA TF operation */
PORT_TF_DATA = 0x00,
PORT_TF_FEATURE = 0x01,
PORT_TF_NSECT = 0x02,
PORT_TF_LBAL = 0x03,
PORT_TF_LBAM = 0x04,
PORT_TF_LBAH = 0x05,
PORT_TF_DEVICE = 0x06,
PORT_TF_COMMAND = 0x07,
PORT_TF_ALT_STAT = 0x08,
PORT_IRQ_STAT = 0x09,
PORT_IRQ_MASK = 0x0a,
PORT_PRD_CTL = 0x0b,
PORT_PRD_ADDR = 0x0c,
PORT_PRD_XFERLEN = 0x10,
PORT_CPB_CPBLAR = 0x18,
PORT_CPB_PTQFIFO = 0x1c,
/* IDMA register */
PORT_IDMA_CTL = 0x14,
PORT_IDMA_STAT = 0x16,
PORT_RPQ_FIFO = 0x1e,
PORT_RPQ_CNT = 0x1f,
PORT_SCR = 0x20,
/* HOST_CTL bits */
HCTL_LEDEN = (1 << 3), /* enable LED operation */
HCTL_IRQOFF = (1 << 8), /* global IRQ off */
HCTL_FTHD0 = (1 << 10), /* fifo threshold 0 */
HCTL_FTHD1 = (1 << 11), /* fifo threshold 1*/
HCTL_PWRDWN = (1 << 12), /* power down PHYs */
HCTL_SOFTRST = (1 << 13), /* global reset (no phy reset) */
HCTL_RPGSEL = (1 << 15), /* register page select */
HCTL_KNOWN_BITS = HCTL_IRQOFF | HCTL_PWRDWN | HCTL_SOFTRST |
HCTL_RPGSEL,
/* HOST_IRQ_(STAT|MASK) bits */
HIRQ_PORT0 = (1 << 0),
HIRQ_PORT1 = (1 << 1),
HIRQ_SOFT = (1 << 14),
HIRQ_GLOBAL = (1 << 15), /* STAT only */
/* PORT_IRQ_(STAT|MASK) bits */
PIRQ_OFFLINE = (1 << 0), /* device unplugged */
PIRQ_ONLINE = (1 << 1), /* device plugged */
PIRQ_COMPLETE = (1 << 2), /* completion interrupt */
PIRQ_FATAL = (1 << 3), /* fatal error */
PIRQ_ATA = (1 << 4), /* ATA interrupt */
PIRQ_REPLY = (1 << 5), /* reply FIFO not empty */
PIRQ_PENDING = (1 << 7), /* port IRQ pending (STAT only) */
PIRQ_ERR = PIRQ_OFFLINE | PIRQ_ONLINE | PIRQ_FATAL,
PIRQ_MASK_DEFAULT = PIRQ_REPLY | PIRQ_ATA,
PIRQ_MASK_FREEZE = 0xff,
/* PORT_PRD_CTL bits */
PRD_CTL_START = (1 << 0),
PRD_CTL_WR = (1 << 3),
PRD_CTL_DMAEN = (1 << 7), /* DMA enable */
/* PORT_IDMA_CTL bits */
IDMA_CTL_RST_ATA = (1 << 2), /* hardreset ATA bus */
IDMA_CTL_RST_IDMA = (1 << 5), /* reset IDMA machinary */
IDMA_CTL_GO = (1 << 7), /* IDMA mode go */
IDMA_CTL_ATA_NIEN = (1 << 8), /* ATA IRQ disable */
/* PORT_IDMA_STAT bits */
IDMA_STAT_PERR = (1 << 0), /* PCI ERROR MODE */
IDMA_STAT_CPBERR = (1 << 1), /* ADMA CPB error */
IDMA_STAT_LGCY = (1 << 3), /* ADMA legacy */
IDMA_STAT_UIRQ = (1 << 4), /* ADMA unsolicited irq */
IDMA_STAT_STPD = (1 << 5), /* ADMA stopped */
IDMA_STAT_PSD = (1 << 6), /* ADMA pause */
IDMA_STAT_DONE = (1 << 7), /* ADMA done */
IDMA_STAT_ERR = IDMA_STAT_PERR | IDMA_STAT_CPBERR,
/* CPB Control Flags*/
CPB_CTL_VALID = (1 << 0), /* CPB valid */
CPB_CTL_QUEUED = (1 << 1), /* queued command */
CPB_CTL_DATA = (1 << 2), /* data, rsvd in datasheet */
CPB_CTL_IEN = (1 << 3), /* PCI interrupt enable */
CPB_CTL_DEVDIR = (1 << 4), /* device direction control */
/* CPB Response Flags */
CPB_RESP_DONE = (1 << 0), /* ATA command complete */
CPB_RESP_REL = (1 << 1), /* ATA release */
CPB_RESP_IGNORED = (1 << 2), /* CPB ignored */
CPB_RESP_ATA_ERR = (1 << 3), /* ATA command error */
CPB_RESP_SPURIOUS = (1 << 4), /* ATA spurious interrupt error */
CPB_RESP_UNDERFLOW = (1 << 5), /* APRD deficiency length error */
CPB_RESP_OVERFLOW = (1 << 6), /* APRD exccess length error */
CPB_RESP_CPB_ERR = (1 << 7), /* CPB error flag */
/* PRD Control Flags */
PRD_DRAIN = (1 << 1), /* ignore data excess */
PRD_CDB = (1 << 2), /* atapi packet command pointer */
PRD_DIRECT_INTR = (1 << 3), /* direct interrupt */
PRD_DMA = (1 << 4), /* data transfer method */
PRD_WRITE = (1 << 5), /* data dir, rsvd in datasheet */
PRD_IOM = (1 << 6), /* io/memory transfer */
PRD_END = (1 << 7), /* APRD chain end */
};
/* Comman Parameter Block */
struct inic_cpb {
u8 resp_flags; /* Response Flags */
u8 error; /* ATA Error */
u8 status; /* ATA Status */
u8 ctl_flags; /* Control Flags */
__le32 len; /* Total Transfer Length */
__le32 prd; /* First PRD pointer */
u8 rsvd[4];
/* 16 bytes */
u8 feature; /* ATA Feature */
u8 hob_feature; /* ATA Ex. Feature */
u8 device; /* ATA Device/Head */
u8 mirctl; /* Mirror Control */
u8 nsect; /* ATA Sector Count */
u8 hob_nsect; /* ATA Ex. Sector Count */
u8 lbal; /* ATA Sector Number */
u8 hob_lbal; /* ATA Ex. Sector Number */
u8 lbam; /* ATA Cylinder Low */
u8 hob_lbam; /* ATA Ex. Cylinder Low */
u8 lbah; /* ATA Cylinder High */
u8 hob_lbah; /* ATA Ex. Cylinder High */
u8 command; /* ATA Command */
u8 ctl; /* ATA Control */
u8 slave_error; /* Slave ATA Error */
u8 slave_status; /* Slave ATA Status */
/* 32 bytes */
} __packed;
/* Physical Region Descriptor */
struct inic_prd {
__le32 mad; /* Physical Memory Address */
__le16 len; /* Transfer Length */
u8 rsvd;
u8 flags; /* Control Flags */
} __packed;
struct inic_pkt {
struct inic_cpb cpb;
struct inic_prd prd[LIBATA_MAX_PRD + 1]; /* + 1 for cdb */
u8 cdb[ATAPI_CDB_LEN];
} __packed;
struct inic_host_priv {
void __iomem *mmio_base;
u16 cached_hctl;
};
struct inic_port_priv {
struct inic_pkt *pkt;
dma_addr_t pkt_dma;
u32 *cpb_tbl;
dma_addr_t cpb_tbl_dma;
};
static struct scsi_host_template inic_sht = {
ATA_BASE_SHT(DRV_NAME),
.sg_tablesize = LIBATA_MAX_PRD, /* maybe it can be larger? */
.dma_boundary = INIC_DMA_BOUNDARY,
};
static const int scr_map[] = {
[SCR_STATUS] = 0,
[SCR_ERROR] = 1,
[SCR_CONTROL] = 2,
};
static void __iomem *inic_port_base(struct ata_port *ap)
{
struct inic_host_priv *hpriv = ap->host->private_data;
return hpriv->mmio_base + ap->port_no * PORT_SIZE;
}
static void inic_reset_port(void __iomem *port_base)
{
void __iomem *idma_ctl = port_base + PORT_IDMA_CTL;
/* stop IDMA engine */
readw(idma_ctl); /* flush */
msleep(1);
/* mask IRQ and assert reset */
writew(IDMA_CTL_RST_IDMA, idma_ctl);
readw(idma_ctl); /* flush */
msleep(1);
/* release reset */
writew(0, idma_ctl);
/* clear irq */
writeb(0xff, port_base + PORT_IRQ_STAT);
}
static int inic_scr_read(struct ata_link *link, unsigned sc_reg, u32 *val)
{
void __iomem *scr_addr = inic_port_base(link->ap) + PORT_SCR;
if (unlikely(sc_reg >= ARRAY_SIZE(scr_map)))
return -EINVAL;
*val = readl(scr_addr + scr_map[sc_reg] * 4);
/* this controller has stuck DIAG.N, ignore it */
if (sc_reg == SCR_ERROR)
*val &= ~SERR_PHYRDY_CHG;
return 0;
}
static int inic_scr_write(struct ata_link *link, unsigned sc_reg, u32 val)
{
void __iomem *scr_addr = inic_port_base(link->ap) + PORT_SCR;
if (unlikely(sc_reg >= ARRAY_SIZE(scr_map)))
return -EINVAL;
writel(val, scr_addr + scr_map[sc_reg] * 4);
return 0;
}
static void inic_stop_idma(struct ata_port *ap)
{
void __iomem *port_base = inic_port_base(ap);
readb(port_base + PORT_RPQ_FIFO);
readb(port_base + PORT_RPQ_CNT);
writew(0, port_base + PORT_IDMA_CTL);
}
static void inic_host_err_intr(struct ata_port *ap, u8 irq_stat, u16 idma_stat)
{
struct ata_eh_info *ehi = &ap->link.eh_info;
struct inic_port_priv *pp = ap->private_data;
struct inic_cpb *cpb = &pp->pkt->cpb;
bool freeze = false;
ata_ehi_clear_desc(ehi);
ata_ehi_push_desc(ehi, "irq_stat=0x%x idma_stat=0x%x",
irq_stat, idma_stat);
inic_stop_idma(ap);
if (irq_stat & (PIRQ_OFFLINE | PIRQ_ONLINE)) {
ata_ehi_push_desc(ehi, "hotplug");
ata_ehi_hotplugged(ehi);
freeze = true;
}
if (idma_stat & IDMA_STAT_PERR) {
ata_ehi_push_desc(ehi, "PCI error");
freeze = true;
}
if (idma_stat & IDMA_STAT_CPBERR) {
ata_ehi_push_desc(ehi, "CPB error");
if (cpb->resp_flags & CPB_RESP_IGNORED) {
__ata_ehi_push_desc(ehi, " ignored");
ehi->err_mask |= AC_ERR_INVALID;
freeze = true;
}
if (cpb->resp_flags & CPB_RESP_ATA_ERR)
ehi->err_mask |= AC_ERR_DEV;
if (cpb->resp_flags & CPB_RESP_SPURIOUS) {
__ata_ehi_push_desc(ehi, " spurious-intr");
ehi->err_mask |= AC_ERR_HSM;
freeze = true;
}
if (cpb->resp_flags &
(CPB_RESP_UNDERFLOW | CPB_RESP_OVERFLOW)) {
__ata_ehi_push_desc(ehi, " data-over/underflow");
ehi->err_mask |= AC_ERR_HSM;
freeze = true;
}
}
if (freeze)
ata_port_freeze(ap);
else
ata_port_abort(ap);
}
static void inic_host_intr(struct ata_port *ap)
{
void __iomem *port_base = inic_port_base(ap);
struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->link.active_tag);
u8 irq_stat;
u16 idma_stat;
/* read and clear IRQ status */
irq_stat = readb(port_base + PORT_IRQ_STAT);
writeb(irq_stat, port_base + PORT_IRQ_STAT);
idma_stat = readw(port_base + PORT_IDMA_STAT);
if (unlikely((irq_stat & PIRQ_ERR) || (idma_stat & IDMA_STAT_ERR)))
inic_host_err_intr(ap, irq_stat, idma_stat);
if (unlikely(!qc))
goto spurious;
if (likely(idma_stat & IDMA_STAT_DONE)) {
inic_stop_idma(ap);
/* Depending on circumstances, device error
* isn't reported by IDMA, check it explicitly.
*/
if (unlikely(readb(port_base + PORT_TF_COMMAND) &
(ATA_DF | ATA_ERR)))
qc->err_mask |= AC_ERR_DEV;
ata_qc_complete(qc);
return;
}
spurious:
ata_port_warn(ap, "unhandled interrupt: cmd=0x%x irq_stat=0x%x idma_stat=0x%x\n",
qc ? qc->tf.command : 0xff, irq_stat, idma_stat);
}
static irqreturn_t inic_interrupt(int irq, void *dev_instance)
{
struct ata_host *host = dev_instance;
struct inic_host_priv *hpriv = host->private_data;
u16 host_irq_stat;
int i, handled = 0;
host_irq_stat = readw(hpriv->mmio_base + HOST_IRQ_STAT);
if (unlikely(!(host_irq_stat & HIRQ_GLOBAL)))
goto out;
spin_lock(&host->lock);
for (i = 0; i < NR_PORTS; i++)
if (host_irq_stat & (HIRQ_PORT0 << i)) {
inic_host_intr(host->ports[i]);
handled++;
}
spin_unlock(&host->lock);
out:
return IRQ_RETVAL(handled);
}
static int inic_check_atapi_dma(struct ata_queued_cmd *qc)
{
/* For some reason ATAPI_PROT_DMA doesn't work for some
* commands including writes and other misc ops. Use PIO
* protocol instead, which BTW is driven by the DMA engine
* anyway, so it shouldn't make much difference for native
* SATA devices.
*/
if (atapi_cmd_type(qc->cdb[0]) == READ)
return 0;
return 1;
}
static void inic_fill_sg(struct inic_prd *prd, struct ata_queued_cmd *qc)
{
struct scatterlist *sg;
unsigned int si;
u8 flags = 0;
if (qc->tf.flags & ATA_TFLAG_WRITE)
flags |= PRD_WRITE;
if (ata_is_dma(qc->tf.protocol))
flags |= PRD_DMA;
for_each_sg(qc->sg, sg, qc->n_elem, si) {
prd->mad = cpu_to_le32(sg_dma_address(sg));
prd->len = cpu_to_le16(sg_dma_len(sg));
prd->flags = flags;
prd++;
}
WARN_ON(!si);
prd[-1].flags |= PRD_END;
}
static void inic_qc_prep(struct ata_queued_cmd *qc)
{
struct inic_port_priv *pp = qc->ap->private_data;
struct inic_pkt *pkt = pp->pkt;
struct inic_cpb *cpb = &pkt->cpb;
struct inic_prd *prd = pkt->prd;
bool is_atapi = ata_is_atapi(qc->tf.protocol);
bool is_data = ata_is_data(qc->tf.protocol);
unsigned int cdb_len = 0;
VPRINTK("ENTER\n");
if (is_atapi)
cdb_len = qc->dev->cdb_len;
/* prepare packet, based on initio driver */
memset(pkt, 0, sizeof(struct inic_pkt));
cpb->ctl_flags = CPB_CTL_VALID | CPB_CTL_IEN;
if (is_atapi || is_data)
cpb->ctl_flags |= CPB_CTL_DATA;
cpb->len = cpu_to_le32(qc->nbytes + cdb_len);
cpb->prd = cpu_to_le32(pp->pkt_dma + offsetof(struct inic_pkt, prd));
cpb->device = qc->tf.device;
cpb->feature = qc->tf.feature;
cpb->nsect = qc->tf.nsect;
cpb->lbal = qc->tf.lbal;
cpb->lbam = qc->tf.lbam;
cpb->lbah = qc->tf.lbah;
if (qc->tf.flags & ATA_TFLAG_LBA48) {
cpb->hob_feature = qc->tf.hob_feature;
cpb->hob_nsect = qc->tf.hob_nsect;
cpb->hob_lbal = qc->tf.hob_lbal;
cpb->hob_lbam = qc->tf.hob_lbam;
cpb->hob_lbah = qc->tf.hob_lbah;
}
cpb->command = qc->tf.command;
/* don't load ctl - dunno why. it's like that in the initio driver */
/* setup PRD for CDB */
if (is_atapi) {
memcpy(pkt->cdb, qc->cdb, ATAPI_CDB_LEN);
prd->mad = cpu_to_le32(pp->pkt_dma +
offsetof(struct inic_pkt, cdb));
prd->len = cpu_to_le16(cdb_len);
prd->flags = PRD_CDB | PRD_WRITE;
if (!is_data)
prd->flags |= PRD_END;
prd++;
}
/* setup sg table */
if (is_data)
inic_fill_sg(prd, qc);
pp->cpb_tbl[0] = pp->pkt_dma;
}
static unsigned int inic_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
void __iomem *port_base = inic_port_base(ap);
/* fire up the ADMA engine */
writew(HCTL_FTHD0 | HCTL_LEDEN, port_base + HOST_CTL);
writew(IDMA_CTL_GO, port_base + PORT_IDMA_CTL);
writeb(0, port_base + PORT_CPB_PTQFIFO);
return 0;
}
static void inic_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
{
void __iomem *port_base = inic_port_base(ap);
tf->feature = readb(port_base + PORT_TF_FEATURE);
tf->nsect = readb(port_base + PORT_TF_NSECT);
tf->lbal = readb(port_base + PORT_TF_LBAL);
tf->lbam = readb(port_base + PORT_TF_LBAM);
tf->lbah = readb(port_base + PORT_TF_LBAH);
tf->device = readb(port_base + PORT_TF_DEVICE);
tf->command = readb(port_base + PORT_TF_COMMAND);
}
static bool inic_qc_fill_rtf(struct ata_queued_cmd *qc)
{
struct ata_taskfile *rtf = &qc->result_tf;
struct ata_taskfile tf;
/* FIXME: Except for status and error, result TF access
* doesn't work. I tried reading from BAR0/2, CPB and BAR5.
* None works regardless of which command interface is used.
* For now return true iff status indicates device error.
* This means that we're reporting bogus sector for RW
* failures. Eeekk....
*/
inic_tf_read(qc->ap, &tf);
if (!(tf.command & ATA_ERR))
return false;
rtf->command = tf.command;
rtf->feature = tf.feature;
return true;
}
static void inic_freeze(struct ata_port *ap)
{
void __iomem *port_base = inic_port_base(ap);
writeb(PIRQ_MASK_FREEZE, port_base + PORT_IRQ_MASK);
writeb(0xff, port_base + PORT_IRQ_STAT);
}
static void inic_thaw(struct ata_port *ap)
{
void __iomem *port_base = inic_port_base(ap);
writeb(0xff, port_base + PORT_IRQ_STAT);
writeb(PIRQ_MASK_DEFAULT, port_base + PORT_IRQ_MASK);
}
static int inic_check_ready(struct ata_link *link)
{
void __iomem *port_base = inic_port_base(link->ap);
return ata_check_ready(readb(port_base + PORT_TF_COMMAND));
}
/*
* SRST and SControl hardreset don't give valid signature on this
* controller. Only controller specific hardreset mechanism works.
*/
static int inic_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
struct ata_port *ap = link->ap;
void __iomem *port_base = inic_port_base(ap);
void __iomem *idma_ctl = port_base + PORT_IDMA_CTL;
const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
int rc;
/* hammer it into sane state */
inic_reset_port(port_base);
writew(IDMA_CTL_RST_ATA, idma_ctl);
readw(idma_ctl); /* flush */
ata_msleep(ap, 1);
writew(0, idma_ctl);
rc = sata_link_resume(link, timing, deadline);
if (rc) {
ata_link_warn(link,
"failed to resume link after reset (errno=%d)\n",
rc);
return rc;
}
*class = ATA_DEV_NONE;
if (ata_link_online(link)) {
struct ata_taskfile tf;
/* wait for link to become ready */
rc = ata_wait_after_reset(link, deadline, inic_check_ready);
/* link occupied, -ENODEV too is an error */
if (rc) {
ata_link_warn(link,
"device not ready after hardreset (errno=%d)\n",
rc);
return rc;
}
inic_tf_read(ap, &tf);
*class = ata_dev_classify(&tf);
}
return 0;
}
static void inic_error_handler(struct ata_port *ap)
{
void __iomem *port_base = inic_port_base(ap);
inic_reset_port(port_base);
ata_std_error_handler(ap);
}
static void inic_post_internal_cmd(struct ata_queued_cmd *qc)
{
/* make DMA engine forget about the failed command */
if (qc->flags & ATA_QCFLAG_FAILED)
inic_reset_port(inic_port_base(qc->ap));
}
static void init_port(struct ata_port *ap)
{
void __iomem *port_base = inic_port_base(ap);
struct inic_port_priv *pp = ap->private_data;
/* clear packet and CPB table */
memset(pp->pkt, 0, sizeof(struct inic_pkt));
memset(pp->cpb_tbl, 0, IDMA_CPB_TBL_SIZE);
/* setup CPB lookup table addresses */
writel(pp->cpb_tbl_dma, port_base + PORT_CPB_CPBLAR);
}
static int inic_port_resume(struct ata_port *ap)
{
init_port(ap);
return 0;
}
static int inic_port_start(struct ata_port *ap)
{
struct device *dev = ap->host->dev;
struct inic_port_priv *pp;
/* alloc and initialize private data */
pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
if (!pp)
return -ENOMEM;
ap->private_data = pp;
/* Alloc resources */
pp->pkt = dmam_alloc_coherent(dev, sizeof(struct inic_pkt),
&pp->pkt_dma, GFP_KERNEL);
if (!pp->pkt)
return -ENOMEM;
pp->cpb_tbl = dmam_alloc_coherent(dev, IDMA_CPB_TBL_SIZE,
&pp->cpb_tbl_dma, GFP_KERNEL);
if (!pp->cpb_tbl)
return -ENOMEM;
init_port(ap);
return 0;
}
static struct ata_port_operations inic_port_ops = {
.inherits = &sata_port_ops,
.check_atapi_dma = inic_check_atapi_dma,
.qc_prep = inic_qc_prep,
.qc_issue = inic_qc_issue,
.qc_fill_rtf = inic_qc_fill_rtf,
.freeze = inic_freeze,
.thaw = inic_thaw,
.hardreset = inic_hardreset,
.error_handler = inic_error_handler,
.post_internal_cmd = inic_post_internal_cmd,
.scr_read = inic_scr_read,
.scr_write = inic_scr_write,
.port_resume = inic_port_resume,
.port_start = inic_port_start,
};
static struct ata_port_info inic_port_info = {
.flags = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA6,
.port_ops = &inic_port_ops
};
static int init_controller(void __iomem *mmio_base, u16 hctl)
{
int i;
u16 val;
hctl &= ~HCTL_KNOWN_BITS;
/* Soft reset whole controller. Spec says reset duration is 3
* PCI clocks, be generous and give it 10ms.
*/
writew(hctl | HCTL_SOFTRST, mmio_base + HOST_CTL);
readw(mmio_base + HOST_CTL); /* flush */
for (i = 0; i < 10; i++) {
msleep(1);
val = readw(mmio_base + HOST_CTL);
if (!(val & HCTL_SOFTRST))
break;
}
if (val & HCTL_SOFTRST)
return -EIO;
/* mask all interrupts and reset ports */
for (i = 0; i < NR_PORTS; i++) {
void __iomem *port_base = mmio_base + i * PORT_SIZE;
writeb(0xff, port_base + PORT_IRQ_MASK);
inic_reset_port(port_base);
}
/* port IRQ is masked now, unmask global IRQ */
writew(hctl & ~HCTL_IRQOFF, mmio_base + HOST_CTL);
val = readw(mmio_base + HOST_IRQ_MASK);
val &= ~(HIRQ_PORT0 | HIRQ_PORT1);
writew(val, mmio_base + HOST_IRQ_MASK);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int inic_pci_device_resume(struct pci_dev *pdev)
{
struct ata_host *host = pci_get_drvdata(pdev);
struct inic_host_priv *hpriv = host->private_data;
int rc;
rc = ata_pci_device_do_resume(pdev);
if (rc)
return rc;
if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
rc = init_controller(hpriv->mmio_base, hpriv->cached_hctl);
if (rc)
return rc;
}
ata_host_resume(host);
return 0;
}
#endif
static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
const struct ata_port_info *ppi[] = { &inic_port_info, NULL };
struct ata_host *host;
struct inic_host_priv *hpriv;
void __iomem * const *iomap;
int mmio_bar;
int i, rc;
ata_print_version_once(&pdev->dev, DRV_VERSION);
dev_alert(&pdev->dev, "inic162x support is broken with common data corruption issues and will be disabled by default, contact linux-ide@vger.kernel.org if in production use\n");
/* alloc host */
host = ata_host_alloc_pinfo(&pdev->dev, ppi, NR_PORTS);
hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
if (!host || !hpriv)
return -ENOMEM;
host->private_data = hpriv;
/* Acquire resources and fill host. Note that PCI and cardbus
* use different BARs.
*/
rc = pcim_enable_device(pdev);
if (rc)
return rc;
if (pci_resource_flags(pdev, MMIO_BAR_PCI) & IORESOURCE_MEM)
mmio_bar = MMIO_BAR_PCI;
else
mmio_bar = MMIO_BAR_CARDBUS;
rc = pcim_iomap_regions(pdev, 1 << mmio_bar, DRV_NAME);
if (rc)
return rc;
host->iomap = iomap = pcim_iomap_table(pdev);
hpriv->mmio_base = iomap[mmio_bar];
hpriv->cached_hctl = readw(hpriv->mmio_base + HOST_CTL);
for (i = 0; i < NR_PORTS; i++) {
struct ata_port *ap = host->ports[i];
ata_port_pbar_desc(ap, mmio_bar, -1, "mmio");
ata_port_pbar_desc(ap, mmio_bar, i * PORT_SIZE, "port");
}
/* Set dma_mask. This devices doesn't support 64bit addressing. */
rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
if (rc) {
dev_err(&pdev->dev, "32-bit DMA enable failed\n");
return rc;
}
rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
if (rc) {
dev_err(&pdev->dev, "32-bit consistent DMA enable failed\n");
return rc;
}
/*
* This controller is braindamaged. dma_boundary is 0xffff
* like others but it will lock up the whole machine HARD if
* 65536 byte PRD entry is fed. Reduce maximum segment size.
*/
rc = pci_set_dma_max_seg_size(pdev, 65536 - 512);
if (rc) {
dev_err(&pdev->dev, "failed to set the maximum segment size\n");
return rc;
}
rc = init_controller(hpriv->mmio_base, hpriv->cached_hctl);
if (rc) {
dev_err(&pdev->dev, "failed to initialize controller\n");
return rc;
}
pci_set_master(pdev);
return ata_host_activate(host, pdev->irq, inic_interrupt, IRQF_SHARED,
&inic_sht);
}
static const struct pci_device_id inic_pci_tbl[] = {
{ PCI_VDEVICE(INIT, 0x1622), },
{ },
};
static struct pci_driver inic_pci_driver = {
.name = DRV_NAME,
.id_table = inic_pci_tbl,
#ifdef CONFIG_PM_SLEEP
.suspend = ata_pci_device_suspend,
.resume = inic_pci_device_resume,
#endif
.probe = inic_init_one,
.remove = ata_pci_remove_one,
};
module_pci_driver(inic_pci_driver);
MODULE_AUTHOR("Tejun Heo");
MODULE_DESCRIPTION("low-level driver for Initio 162x SATA");
MODULE_LICENSE("GPL v2");
MODULE_DEVICE_TABLE(pci, inic_pci_tbl);
MODULE_VERSION(DRV_VERSION);