/* * Reset driver for NXP LPC18xx/43xx Reset Generation Unit (RGU). * * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * */ #include <linux/clk.h> #include <linux/delay.h> #include <linux/err.h> #include <linux/io.h> #include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> #include <linux/reboot.h> #include <linux/reset-controller.h> #include <linux/spinlock.h> /* LPC18xx RGU registers */ #define LPC18XX_RGU_CTRL0 0x100 #define LPC18XX_RGU_CTRL1 0x104 #define LPC18XX_RGU_ACTIVE_STATUS0 0x150 #define LPC18XX_RGU_ACTIVE_STATUS1 0x154 #define LPC18XX_RGU_RESETS_PER_REG 32 /* Internal reset outputs */ #define LPC18XX_RGU_CORE_RST 0 #define LPC43XX_RGU_M0SUB_RST 12 #define LPC43XX_RGU_M0APP_RST 56 struct lpc18xx_rgu_data { struct reset_controller_dev rcdev; struct clk *clk_delay; struct clk *clk_reg; void __iomem *base; spinlock_t lock; u32 delay_us; }; #define to_rgu_data(p) container_of(p, struct lpc18xx_rgu_data, rcdev) static void __iomem *rgu_base; static int lpc18xx_rgu_restart(struct notifier_block *this, unsigned long mode, void *cmd) { writel(BIT(LPC18XX_RGU_CORE_RST), rgu_base + LPC18XX_RGU_CTRL0); mdelay(2000); pr_emerg("%s: unable to restart system\n", __func__); return NOTIFY_DONE; } static struct notifier_block lpc18xx_rgu_restart_nb = { .notifier_call = lpc18xx_rgu_restart, .priority = 192, }; /* * The LPC18xx RGU has mostly self-deasserting resets except for the * two reset lines going to the internal Cortex-M0 cores. * * To prevent the M0 core resets from accidentally getting deasserted * status register must be check and bits in control register set to * preserve the state. */ static int lpc18xx_rgu_setclear_reset(struct reset_controller_dev *rcdev, unsigned long id, bool set) { struct lpc18xx_rgu_data *rc = to_rgu_data(rcdev); u32 stat_offset = LPC18XX_RGU_ACTIVE_STATUS0; u32 ctrl_offset = LPC18XX_RGU_CTRL0; unsigned long flags; u32 stat, rst_bit; stat_offset += (id / LPC18XX_RGU_RESETS_PER_REG) * sizeof(u32); ctrl_offset += (id / LPC18XX_RGU_RESETS_PER_REG) * sizeof(u32); rst_bit = 1 << (id % LPC18XX_RGU_RESETS_PER_REG); spin_lock_irqsave(&rc->lock, flags); stat = ~readl(rc->base + stat_offset); if (set) writel(stat | rst_bit, rc->base + ctrl_offset); else writel(stat & ~rst_bit, rc->base + ctrl_offset); spin_unlock_irqrestore(&rc->lock, flags); return 0; } static int lpc18xx_rgu_assert(struct reset_controller_dev *rcdev, unsigned long id) { return lpc18xx_rgu_setclear_reset(rcdev, id, true); } static int lpc18xx_rgu_deassert(struct reset_controller_dev *rcdev, unsigned long id) { return lpc18xx_rgu_setclear_reset(rcdev, id, false); } /* Only M0 cores require explicit reset deassert */ static int lpc18xx_rgu_reset(struct reset_controller_dev *rcdev, unsigned long id) { struct lpc18xx_rgu_data *rc = to_rgu_data(rcdev); lpc18xx_rgu_assert(rcdev, id); udelay(rc->delay_us); switch (id) { case LPC43XX_RGU_M0SUB_RST: case LPC43XX_RGU_M0APP_RST: lpc18xx_rgu_setclear_reset(rcdev, id, false); } return 0; } static int lpc18xx_rgu_status(struct reset_controller_dev *rcdev, unsigned long id) { struct lpc18xx_rgu_data *rc = to_rgu_data(rcdev); u32 bit, offset = LPC18XX_RGU_ACTIVE_STATUS0; offset += (id / LPC18XX_RGU_RESETS_PER_REG) * sizeof(u32); bit = 1 << (id % LPC18XX_RGU_RESETS_PER_REG); return !(readl(rc->base + offset) & bit); } static struct reset_control_ops lpc18xx_rgu_ops = { .reset = lpc18xx_rgu_reset, .assert = lpc18xx_rgu_assert, .deassert = lpc18xx_rgu_deassert, .status = lpc18xx_rgu_status, }; static int lpc18xx_rgu_probe(struct platform_device *pdev) { struct lpc18xx_rgu_data *rc; struct resource *res; u32 fcclk, firc; int ret; rc = devm_kzalloc(&pdev->dev, sizeof(*rc), GFP_KERNEL); if (!rc) return -ENOMEM; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); rc->base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(rc->base)) return PTR_ERR(rc->base); rc->clk_reg = devm_clk_get(&pdev->dev, "reg"); if (IS_ERR(rc->clk_reg)) { dev_err(&pdev->dev, "reg clock not found\n"); return PTR_ERR(rc->clk_reg); } rc->clk_delay = devm_clk_get(&pdev->dev, "delay"); if (IS_ERR(rc->clk_delay)) { dev_err(&pdev->dev, "delay clock not found\n"); return PTR_ERR(rc->clk_delay); } ret = clk_prepare_enable(rc->clk_reg); if (ret) { dev_err(&pdev->dev, "unable to enable reg clock\n"); return ret; } ret = clk_prepare_enable(rc->clk_delay); if (ret) { dev_err(&pdev->dev, "unable to enable delay clock\n"); goto dis_clk_reg; } fcclk = clk_get_rate(rc->clk_reg) / USEC_PER_SEC; firc = clk_get_rate(rc->clk_delay) / USEC_PER_SEC; if (fcclk == 0 || firc == 0) rc->delay_us = 2; else rc->delay_us = DIV_ROUND_UP(fcclk, firc * firc); spin_lock_init(&rc->lock); rc->rcdev.owner = THIS_MODULE; rc->rcdev.nr_resets = 64; rc->rcdev.ops = &lpc18xx_rgu_ops; rc->rcdev.of_node = pdev->dev.of_node; platform_set_drvdata(pdev, rc); ret = reset_controller_register(&rc->rcdev); if (ret) { dev_err(&pdev->dev, "unable to register device\n"); goto dis_clks; } rgu_base = rc->base; ret = register_restart_handler(&lpc18xx_rgu_restart_nb); if (ret) dev_warn(&pdev->dev, "failed to register restart handler\n"); return 0; dis_clks: clk_disable_unprepare(rc->clk_delay); dis_clk_reg: clk_disable_unprepare(rc->clk_reg); return ret; } static int lpc18xx_rgu_remove(struct platform_device *pdev) { struct lpc18xx_rgu_data *rc = platform_get_drvdata(pdev); int ret; ret = unregister_restart_handler(&lpc18xx_rgu_restart_nb); if (ret) dev_warn(&pdev->dev, "failed to unregister restart handler\n"); reset_controller_unregister(&rc->rcdev); clk_disable_unprepare(rc->clk_delay); clk_disable_unprepare(rc->clk_reg); return 0; } static const struct of_device_id lpc18xx_rgu_match[] = { { .compatible = "nxp,lpc1850-rgu" }, { } }; MODULE_DEVICE_TABLE(of, lpc18xx_rgu_match); static struct platform_driver lpc18xx_rgu_driver = { .probe = lpc18xx_rgu_probe, .remove = lpc18xx_rgu_remove, .driver = { .name = "lpc18xx-reset", .of_match_table = lpc18xx_rgu_match, }, }; module_platform_driver(lpc18xx_rgu_driver); MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>"); MODULE_DESCRIPTION("Reset driver for LPC18xx/43xx RGU"); MODULE_LICENSE("GPL v2");