/*
* Copyright (C) 2013 Noralf Tronnes
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __LINUX_FBTFT_H
#define __LINUX_FBTFT_H
#include <linux/fb.h>
#include <linux/spinlock.h>
#include <linux/spi/spi.h>
#include <linux/platform_device.h>
#define FBTFT_NOP 0x00
#define FBTFT_SWRESET 0x01
#define FBTFT_RDDID 0x04
#define FBTFT_RDDST 0x09
#define FBTFT_CASET 0x2A
#define FBTFT_RASET 0x2B
#define FBTFT_RAMWR 0x2C
#define FBTFT_ONBOARD_BACKLIGHT 2
#define FBTFT_GPIO_NO_MATCH 0xFFFF
#define FBTFT_GPIO_NAME_SIZE 32
#define FBTFT_MAX_INIT_SEQUENCE 512
#define FBTFT_GAMMA_MAX_VALUES_TOTAL 128
#define FBTFT_OF_INIT_CMD BIT(24)
#define FBTFT_OF_INIT_DELAY BIT(25)
/**
* struct fbtft_gpio - Structure that holds one pinname to gpio mapping
* @name: pinname (reset, dc, etc.)
* @gpio: GPIO number
*
*/
struct fbtft_gpio {
char name[FBTFT_GPIO_NAME_SIZE];
unsigned gpio;
};
struct fbtft_par;
/**
* struct fbtft_ops - FBTFT operations structure
* @write: Writes to interface bus
* @read: Reads from interface bus
* @write_vmem: Writes video memory to display
* @write_reg: Writes to controller register
* @set_addr_win: Set the GRAM update window
* @reset: Reset the LCD controller
* @mkdirty: Marks display lines for update
* @update_display: Updates the display
* @init_display: Initializes the display
* @blank: Blank the display (optional)
* @request_gpios_match: Do pinname to gpio matching
* @request_gpios: Request gpios from the kernel
* @free_gpios: Free previously requested gpios
* @verify_gpios: Verify that necessary gpios is present (optional)
* @register_backlight: Used to register backlight device (optional)
* @unregister_backlight: Unregister backlight device (optional)
* @set_var: Configure LCD with values from variables like @rotate and @bgr
* (optional)
* @set_gamma: Set Gamma curve (optional)
*
* Most of these operations have default functions assigned to them in
* fbtft_framebuffer_alloc()
*/
struct fbtft_ops {
int (*write)(struct fbtft_par *par, void *buf, size_t len);
int (*read)(struct fbtft_par *par, void *buf, size_t len);
int (*write_vmem)(struct fbtft_par *par, size_t offset, size_t len);
void (*write_register)(struct fbtft_par *par, int len, ...);
void (*set_addr_win)(struct fbtft_par *par,
int xs, int ys, int xe, int ye);
void (*reset)(struct fbtft_par *par);
void (*mkdirty)(struct fb_info *info, int from, int to);
void (*update_display)(struct fbtft_par *par,
unsigned start_line, unsigned end_line);
int (*init_display)(struct fbtft_par *par);
int (*blank)(struct fbtft_par *par, bool on);
unsigned long (*request_gpios_match)(struct fbtft_par *par,
const struct fbtft_gpio *gpio);
int (*request_gpios)(struct fbtft_par *par);
int (*verify_gpios)(struct fbtft_par *par);
void (*register_backlight)(struct fbtft_par *par);
void (*unregister_backlight)(struct fbtft_par *par);
int (*set_var)(struct fbtft_par *par);
int (*set_gamma)(struct fbtft_par *par, unsigned long *curves);
};
/**
* struct fbtft_display - Describes the display properties
* @width: Width of display in pixels
* @height: Height of display in pixels
* @regwidth: LCD Controller Register width in bits
* @buswidth: Display interface bus width in bits
* @backlight: Backlight type.
* @fbtftops: FBTFT operations provided by driver or device (platform_data)
* @bpp: Bits per pixel
* @fps: Frames per second
* @txbuflen: Size of transmit buffer
* @init_sequence: Pointer to LCD initialization array
* @gamma: String representation of Gamma curve(s)
* @gamma_num: Number of Gamma curves
* @gamma_len: Number of values per Gamma curve
* @debug: Initial debug value
*
* This structure is not stored by FBTFT except for init_sequence.
*/
struct fbtft_display {
unsigned width;
unsigned height;
unsigned regwidth;
unsigned buswidth;
unsigned backlight;
struct fbtft_ops fbtftops;
unsigned bpp;
unsigned fps;
int txbuflen;
int *init_sequence;
char *gamma;
int gamma_num;
int gamma_len;
unsigned long debug;
};
/**
* struct fbtft_platform_data - Passes display specific data to the driver
* @display: Display properties
* @gpios: Pointer to an array of pinname to gpio mappings
* @rotate: Display rotation angle
* @bgr: LCD Controller BGR bit
* @fps: Frames per second (this will go away, use @fps in @fbtft_display)
* @txbuflen: Size of transmit buffer
* @startbyte: When set, enables use of Startbyte in transfers
* @gamma: String representation of Gamma curve(s)
* @extra: A way to pass extra info
*/
struct fbtft_platform_data {
struct fbtft_display display;
const struct fbtft_gpio *gpios;
unsigned rotate;
bool bgr;
unsigned fps;
int txbuflen;
u8 startbyte;
char *gamma;
void *extra;
};
/**
* struct fbtft_par - Main FBTFT data structure
*
* This structure holds all relevant data to operate the display
*
* See sourcefile for documentation since nested structs is not
* supported by kernel-doc.
*
*/
/* @spi: Set if it is a SPI device
* @pdev: Set if it is a platform device
* @info: Pointer to framebuffer fb_info structure
* @pdata: Pointer to platform data
* @ssbuf: Not used
* @pseudo_palette: Used by fb_set_colreg()
* @txbuf.buf: Transmit buffer
* @txbuf.len: Transmit buffer length
* @buf: Small buffer used when writing init data over SPI
* @startbyte: Used by some controllers when in SPI mode.
* Format: 6 bit Device id + RS bit + RW bit
* @fbtftops: FBTFT operations provided by driver or device (platform_data)
* @dirty_lock: Protects dirty_lines_start and dirty_lines_end
* @dirty_lines_start: Where to begin updating display
* @dirty_lines_end: Where to end updating display
* @gpio.reset: GPIO used to reset display
* @gpio.dc: Data/Command signal, also known as RS
* @gpio.rd: Read latching signal
* @gpio.wr: Write latching signal
* @gpio.latch: Bus latch signal, eg. 16->8 bit bus latch
* @gpio.cs: LCD Chip Select with parallel interface bus
* @gpio.db[16]: Parallel databus
* @gpio.led[16]: Led control signals
* @gpio.aux[16]: Auxiliary signals, not used by core
* @init_sequence: Pointer to LCD initialization array
* @gamma.lock: Mutex for Gamma curve locking
* @gamma.curves: Pointer to Gamma curve array
* @gamma.num_values: Number of values per Gamma curve
* @gamma.num_curves: Number of Gamma curves
* @debug: Pointer to debug value
* @current_debug:
* @first_update_done: Used to only time the first display update
* @update_time: Used to calculate 'fps' in debug output
* @bgr: BGR mode/\n
* @extra: Extra info needed by driver
*/
struct fbtft_par {
struct spi_device *spi;
struct platform_device *pdev;
struct fb_info *info;
struct fbtft_platform_data *pdata;
u16 *ssbuf;
u32 pseudo_palette[16];
struct {
void *buf;
dma_addr_t dma;
size_t len;
} txbuf;
u8 *buf;
u8 startbyte;
struct fbtft_ops fbtftops;
spinlock_t dirty_lock;
unsigned dirty_lines_start;
unsigned dirty_lines_end;
struct {
int reset;
int dc;
int rd;
int wr;
int latch;
int cs;
int db[16];
int led[16];
int aux[16];
} gpio;
int *init_sequence;
struct {
struct mutex lock;
unsigned long *curves;
int num_values;
int num_curves;
} gamma;
unsigned long debug;
bool first_update_done;
ktime_t update_time;
bool bgr;
void *extra;
};
#define NUMARGS(...) (sizeof((int[]){__VA_ARGS__})/sizeof(int))
#define write_reg(par, ...) \
par->fbtftops.write_register(par, NUMARGS(__VA_ARGS__), __VA_ARGS__)
/* fbtft-core.c */
void fbtft_dbg_hex(const struct device *dev, int groupsize,
void *buf, size_t len, const char *fmt, ...);
struct fb_info *fbtft_framebuffer_alloc(struct fbtft_display *display,
struct device *dev,
struct fbtft_platform_data *pdata);
void fbtft_framebuffer_release(struct fb_info *info);
int fbtft_register_framebuffer(struct fb_info *fb_info);
int fbtft_unregister_framebuffer(struct fb_info *fb_info);
void fbtft_register_backlight(struct fbtft_par *par);
void fbtft_unregister_backlight(struct fbtft_par *par);
int fbtft_init_display(struct fbtft_par *par);
int fbtft_probe_common(struct fbtft_display *display, struct spi_device *sdev,
struct platform_device *pdev);
int fbtft_remove_common(struct device *dev, struct fb_info *info);
/* fbtft-io.c */
int fbtft_write_spi(struct fbtft_par *par, void *buf, size_t len);
int fbtft_write_spi_emulate_9(struct fbtft_par *par, void *buf, size_t len);
int fbtft_read_spi(struct fbtft_par *par, void *buf, size_t len);
int fbtft_write_gpio8_wr(struct fbtft_par *par, void *buf, size_t len);
int fbtft_write_gpio16_wr(struct fbtft_par *par, void *buf, size_t len);
int fbtft_write_gpio16_wr_latched(struct fbtft_par *par, void *buf, size_t len);
/* fbtft-bus.c */
int fbtft_write_vmem8_bus8(struct fbtft_par *par, size_t offset, size_t len);
int fbtft_write_vmem16_bus16(struct fbtft_par *par, size_t offset, size_t len);
int fbtft_write_vmem16_bus8(struct fbtft_par *par, size_t offset, size_t len);
int fbtft_write_vmem16_bus9(struct fbtft_par *par, size_t offset, size_t len);
void fbtft_write_reg8_bus8(struct fbtft_par *par, int len, ...);
void fbtft_write_reg8_bus9(struct fbtft_par *par, int len, ...);
void fbtft_write_reg16_bus8(struct fbtft_par *par, int len, ...);
void fbtft_write_reg16_bus16(struct fbtft_par *par, int len, ...);
#define FBTFT_REGISTER_DRIVER(_name, _compatible, _display) \
\
static int fbtft_driver_probe_spi(struct spi_device *spi) \
{ \
return fbtft_probe_common(_display, spi, NULL); \
} \
\
static int fbtft_driver_remove_spi(struct spi_device *spi) \
{ \
struct fb_info *info = spi_get_drvdata(spi); \
\
return fbtft_remove_common(&spi->dev, info); \
} \
\
static int fbtft_driver_probe_pdev(struct platform_device *pdev) \
{ \
return fbtft_probe_common(_display, NULL, pdev); \
} \
\
static int fbtft_driver_remove_pdev(struct platform_device *pdev) \
{ \
struct fb_info *info = platform_get_drvdata(pdev); \
\
return fbtft_remove_common(&pdev->dev, info); \
} \
\
static const struct of_device_id dt_ids[] = { \
{ .compatible = _compatible }, \
{}, \
}; \
\
MODULE_DEVICE_TABLE(of, dt_ids); \
\
\
static struct spi_driver fbtft_driver_spi_driver = { \
.driver = { \
.name = _name, \
.of_match_table = of_match_ptr(dt_ids), \
}, \
.probe = fbtft_driver_probe_spi, \
.remove = fbtft_driver_remove_spi, \
}; \
\
static struct platform_driver fbtft_driver_platform_driver = { \
.driver = { \
.name = _name, \
.owner = THIS_MODULE, \
.of_match_table = of_match_ptr(dt_ids), \
}, \
.probe = fbtft_driver_probe_pdev, \
.remove = fbtft_driver_remove_pdev, \
}; \
\
static int __init fbtft_driver_module_init(void) \
{ \
int ret; \
\
ret = spi_register_driver(&fbtft_driver_spi_driver); \
if (ret < 0) \
return ret; \
return platform_driver_register(&fbtft_driver_platform_driver); \
} \
\
static void __exit fbtft_driver_module_exit(void) \
{ \
spi_unregister_driver(&fbtft_driver_spi_driver); \
platform_driver_unregister(&fbtft_driver_platform_driver); \
} \
\
module_init(fbtft_driver_module_init); \
module_exit(fbtft_driver_module_exit);
/* Debug macros */
/* shorthand debug levels */
#define DEBUG_LEVEL_1 DEBUG_REQUEST_GPIOS
#define DEBUG_LEVEL_2 (DEBUG_LEVEL_1 | DEBUG_DRIVER_INIT_FUNCTIONS | DEBUG_TIME_FIRST_UPDATE)
#define DEBUG_LEVEL_3 (DEBUG_LEVEL_2 | DEBUG_RESET | DEBUG_INIT_DISPLAY | DEBUG_BLANK | DEBUG_REQUEST_GPIOS | DEBUG_FREE_GPIOS | DEBUG_VERIFY_GPIOS | DEBUG_BACKLIGHT | DEBUG_SYSFS)
#define DEBUG_LEVEL_4 (DEBUG_LEVEL_2 | DEBUG_FB_READ | DEBUG_FB_WRITE | DEBUG_FB_FILLRECT | DEBUG_FB_COPYAREA | DEBUG_FB_IMAGEBLIT | DEBUG_FB_BLANK)
#define DEBUG_LEVEL_5 (DEBUG_LEVEL_3 | DEBUG_UPDATE_DISPLAY)
#define DEBUG_LEVEL_6 (DEBUG_LEVEL_4 | DEBUG_LEVEL_5)
#define DEBUG_LEVEL_7 0xFFFFFFFF
#define DEBUG_DRIVER_INIT_FUNCTIONS (1<<3)
#define DEBUG_TIME_FIRST_UPDATE (1<<4)
#define DEBUG_TIME_EACH_UPDATE (1<<5)
#define DEBUG_DEFERRED_IO (1<<6)
#define DEBUG_FBTFT_INIT_FUNCTIONS (1<<7)
/* fbops */
#define DEBUG_FB_READ (1<<8)
#define DEBUG_FB_WRITE (1<<9)
#define DEBUG_FB_FILLRECT (1<<10)
#define DEBUG_FB_COPYAREA (1<<11)
#define DEBUG_FB_IMAGEBLIT (1<<12)
#define DEBUG_FB_SETCOLREG (1<<13)
#define DEBUG_FB_BLANK (1<<14)
#define DEBUG_SYSFS (1<<16)
/* fbtftops */
#define DEBUG_BACKLIGHT (1<<17)
#define DEBUG_READ (1<<18)
#define DEBUG_WRITE (1<<19)
#define DEBUG_WRITE_VMEM (1<<20)
#define DEBUG_WRITE_REGISTER (1<<21)
#define DEBUG_SET_ADDR_WIN (1<<22)
#define DEBUG_RESET (1<<23)
#define DEBUG_MKDIRTY (1<<24)
#define DEBUG_UPDATE_DISPLAY (1<<25)
#define DEBUG_INIT_DISPLAY (1<<26)
#define DEBUG_BLANK (1<<27)
#define DEBUG_REQUEST_GPIOS (1<<28)
#define DEBUG_FREE_GPIOS (1<<29)
#define DEBUG_REQUEST_GPIOS_MATCH (1<<30)
#define DEBUG_VERIFY_GPIOS (1<<31)
#define fbtft_init_dbg(dev, format, arg...) \
do { \
if (unlikely((dev)->platform_data && \
(((struct fbtft_platform_data *)(dev)->platform_data)->display.debug & DEBUG_DRIVER_INIT_FUNCTIONS))) \
dev_info(dev, format, ##arg); \
} while (0)
#define fbtft_par_dbg(level, par, format, arg...) \
do { \
if (unlikely(par->debug & level)) \
dev_info(par->info->device, format, ##arg); \
} while (0)
#define fbtft_par_dbg_hex(level, par, dev, type, buf, num, format, arg...) \
do { \
if (unlikely(par->debug & level)) \
fbtft_dbg_hex(dev, sizeof(type), buf, num * sizeof(type), format, ##arg); \
} while (0)
#endif /* __LINUX_FBTFT_H */