1. 根目录:
2. Documentation
3. devicetree
4. bindings
5. arm
6. msm
7. timer.txt

* MSM Timer

Properties:

- compatible : Should at least contain "qcom,msm-timer". More specific
               properties specify which subsystem the timers are paired with.

               "qcom,kpss-timer" - krait subsystem
               "qcom,scss-timer" - scorpion subsystem

- interrupts : Interrupts for the debug timer, the first general purpose
               timer, and optionally a second general purpose timer, and
               optionally as well, 2 watchdog interrupts, in that order.

- reg : Specifies the base address of the timer registers.

- clocks: Reference to the parent clocks, one per output clock. The parents
          must appear in the same order as the clock names.

- clock-names: The name of the clocks as free-form strings. They should be in
               the same order as the clocks.

- clock-frequency : The frequency of the debug timer and the general purpose
                    timer(s) in Hz in that order.

Optional:

- cpu-offset : per-cpu offset used when the timer is accessed without the
               CPU remapping facilities. The offset is
               cpu-offset + (0x10000 * cpu-nr).

Example:

       timer@200a000 {
               compatible = "qcom,scss-timer", "qcom,msm-timer";
               interrupts = <1 1 0x301>,
                            <1 2 0x301>,
                            <1 3 0x301>,
                            <1 4 0x301>,
                            <1 5 0x301>;
               reg = <0x0200a000 0x100>;
               clock-frequency = <19200000>,
                                 <32768>;
               clocks = <&sleep_clk>;
               clock-names = "sleep";
               cpu-offset = <0x40000>;
       };