1. 根目录:
2. Documentation
3. devicetree
4. bindings
5. clock
6. imx31-clock.txt

* Clock bindings for Freescale i.MX31

Required properties:
- compatible: Should be "fsl,imx31-ccm"
- reg: Address and length of the register set
- interrupts: Should contain CCM interrupt
- #clock-cells: Should be <1>

The clock consumer should specify the desired clock by having the clock
ID in its "clocks" phandle cell.  The following is a full list of i.MX31
clocks and IDs.

	Clock		    ID
	-----------------------
	dummy	             0
	ckih                 1
	ckil                 2
	mpll                 3
	spll                 4
	upll                 5
	mcu_main             6
	hsp                  7
	ahb                  8
	nfc                  9
	ipg                  10
	per_div              11
	per                  12
	csi_sel              13
	fir_sel              14
	csi_div              15
	usb_div_pre          16
	usb_div_post         17
	fir_div_pre          18
	fir_div_post         19
	sdhc1_gate           20
	sdhc2_gate           21
	gpt_gate             22
	epit1_gate           23
	epit2_gate           24
	iim_gate             25
	ata_gate             26
	sdma_gate            27
	cspi3_gate           28
	rng_gate             29
	uart1_gate           30
	uart2_gate           31
	ssi1_gate            32
	i2c1_gate            33
	i2c2_gate            34
	i2c3_gate            35
	hantro_gate          36
	mstick1_gate         37
	mstick2_gate         38
	csi_gate             39
	rtc_gate             40
	wdog_gate            41
	pwm_gate             42
	sim_gate             43
	ect_gate             44
	usb_gate             45
	kpp_gate             46
	ipu_gate             47
	uart3_gate           48
	uart4_gate           49
	uart5_gate           50
	owire_gate           51
	ssi2_gate            52
	cspi1_gate           53
	cspi2_gate           54
	gacc_gate            55
	emi_gate             56
	rtic_gate            57
	firi_gate            58

Examples:

clks: ccm@53f80000{
	compatible = "fsl,imx31-ccm";
	reg = <0x53f80000 0x4000>;
	interrupts = <0 31 0x04 0 53 0x04>;
	#clock-cells = <1>;
};

uart1: serial@43f90000 {
	compatible = "fsl,imx31-uart", "fsl,imx21-uart";
	reg = <0x43f90000 0x4000>;
	interrupts = <45>;
	clocks = <&clks 10>, <&clks 30>;
	clock-names = "ipg", "per";
	status = "disabled";
};