- 根目录:
- drivers
- mfd
- ab8500-gpadc.c
/*
* Copyright (C) ST-Ericsson SA 2010
*
* License Terms: GNU General Public License v2
* Author: Arun R Murthy <arun.murthy@stericsson.com>
* Author: Daniel Willerud <daniel.willerud@stericsson.com>
* Author: Johan Palsson <johan.palsson@stericsson.com>
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/delay.h>
#include <linux/pm_runtime.h>
#include <linux/platform_device.h>
#include <linux/completion.h>
#include <linux/regulator/consumer.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/list.h>
#include <linux/mfd/abx500.h>
#include <linux/mfd/abx500/ab8500.h>
#include <linux/mfd/abx500/ab8500-gpadc.h>
/*
* GPADC register offsets
* Bank : 0x0A
*/
#define AB8500_GPADC_CTRL1_REG 0x00
#define AB8500_GPADC_CTRL2_REG 0x01
#define AB8500_GPADC_CTRL3_REG 0x02
#define AB8500_GPADC_AUTO_TIMER_REG 0x03
#define AB8500_GPADC_STAT_REG 0x04
#define AB8500_GPADC_MANDATAL_REG 0x05
#define AB8500_GPADC_MANDATAH_REG 0x06
#define AB8500_GPADC_AUTODATAL_REG 0x07
#define AB8500_GPADC_AUTODATAH_REG 0x08
#define AB8500_GPADC_MUX_CTRL_REG 0x09
#define AB8540_GPADC_MANDATA2L_REG 0x09
#define AB8540_GPADC_MANDATA2H_REG 0x0A
#define AB8540_GPADC_APEAAX_REG 0x10
#define AB8540_GPADC_APEAAT_REG 0x11
#define AB8540_GPADC_APEAAM_REG 0x12
#define AB8540_GPADC_APEAAH_REG 0x13
#define AB8540_GPADC_APEAAL_REG 0x14
/*
* OTP register offsets
* Bank : 0x15
*/
#define AB8500_GPADC_CAL_1 0x0F
#define AB8500_GPADC_CAL_2 0x10
#define AB8500_GPADC_CAL_3 0x11
#define AB8500_GPADC_CAL_4 0x12
#define AB8500_GPADC_CAL_5 0x13
#define AB8500_GPADC_CAL_6 0x14
#define AB8500_GPADC_CAL_7 0x15
/* New calibration for 8540 */
#define AB8540_GPADC_OTP4_REG_7 0x38
#define AB8540_GPADC_OTP4_REG_6 0x39
#define AB8540_GPADC_OTP4_REG_5 0x3A
/* gpadc constants */
#define EN_VINTCORE12 0x04
#define EN_VTVOUT 0x02
#define EN_GPADC 0x01
#define DIS_GPADC 0x00
#define AVG_1 0x00
#define AVG_4 0x20
#define AVG_8 0x40
#define AVG_16 0x60
#define ADC_SW_CONV 0x04
#define EN_ICHAR 0x80
#define BTEMP_PULL_UP 0x08
#define EN_BUF 0x40
#define DIS_ZERO 0x00
#define GPADC_BUSY 0x01
#define EN_FALLING 0x10
#define EN_TRIG_EDGE 0x02
#define EN_VBIAS_XTAL_TEMP 0x02
/* GPADC constants from AB8500 spec, UM0836 */
#define ADC_RESOLUTION 1024
#define ADC_CH_BTEMP_MIN 0
#define ADC_CH_BTEMP_MAX 1350
#define ADC_CH_DIETEMP_MIN 0
#define ADC_CH_DIETEMP_MAX 1350
#define ADC_CH_CHG_V_MIN 0
#define ADC_CH_CHG_V_MAX 20030
#define ADC_CH_ACCDET2_MIN 0
#define ADC_CH_ACCDET2_MAX 2500
#define ADC_CH_VBAT_MIN 2300
#define ADC_CH_VBAT_MAX 4800
#define ADC_CH_CHG_I_MIN 0
#define ADC_CH_CHG_I_MAX 1500
#define ADC_CH_BKBAT_MIN 0
#define ADC_CH_BKBAT_MAX 3200
/* GPADC constants from AB8540 spec */
#define ADC_CH_IBAT_MIN (-6000) /* mA range measured by ADC for ibat*/
#define ADC_CH_IBAT_MAX 6000
#define ADC_CH_IBAT_MIN_V (-60) /* mV range measured by ADC for ibat*/
#define ADC_CH_IBAT_MAX_V 60
#define IBAT_VDROP_L (-56) /* mV */
#define IBAT_VDROP_H 56
/* This is used to not lose precision when dividing to get gain and offset */
#define CALIB_SCALE 1000
/*
* Number of bits shift used to not lose precision
* when dividing to get ibat gain.
*/
#define CALIB_SHIFT_IBAT 20
/* Time in ms before disabling regulator */
#define GPADC_AUDOSUSPEND_DELAY 1
#define CONVERSION_TIME 500 /* ms */
enum cal_channels {
ADC_INPUT_VMAIN = 0,
ADC_INPUT_BTEMP,
ADC_INPUT_VBAT,
ADC_INPUT_IBAT,
NBR_CAL_INPUTS,
};
/**
* struct adc_cal_data - Table for storing gain and offset for the calibrated
* ADC channels
* @gain: Gain of the ADC channel
* @offset: Offset of the ADC channel
*/
struct adc_cal_data {
s64 gain;
s64 offset;
u16 otp_calib_hi;
u16 otp_calib_lo;
};
/**
* struct ab8500_gpadc - AB8500 GPADC device information
* @dev: pointer to the struct device
* @node: a list of AB8500 GPADCs, hence prepared for
reentrance
* : pointer to the struct ab8500
* @ab8500_gpadc_complete: pointer to the struct completion, to indicate
* the completion of gpadc conversion
* @ab8500_gpadc_lock: structure of type mutex
* @regu: pointer to the struct regulator
* @irq_sw: interrupt number that is used by gpadc for Sw
* conversion
* @irq_hw: interrupt number that is used by gpadc for Hw
* conversion
* @cal_data array of ADC calibration data structs
*/
struct ab8500_gpadc {
struct device *dev;
struct list_head node;
struct ab8500 *parent;
struct completion ab8500_gpadc_complete;
struct mutex ab8500_gpadc_lock;
struct regulator *regu;
int irq_sw;
int irq_hw;
struct adc_cal_data cal_data[NBR_CAL_INPUTS];
};
static LIST_HEAD(ab8500_gpadc_list);
/**
* ab8500_gpadc_get() - returns a reference to the primary AB8500 GPADC
* (i.e. the first GPADC in the instance list)
*/
struct ab8500_gpadc *ab8500_gpadc_get(char *name)
{
struct ab8500_gpadc *gpadc;
list_for_each_entry(gpadc, &ab8500_gpadc_list, node) {
if (!strcmp(name, dev_name(gpadc->dev)))
return gpadc;
}
return ERR_PTR(-ENOENT);
}
EXPORT_SYMBOL(ab8500_gpadc_get);
/**
* ab8500_gpadc_ad_to_voltage() - Convert a raw ADC value to a voltage
*/
int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, u8 channel,
int ad_value)
{
int res;
switch (channel) {
case MAIN_CHARGER_V:
/* For some reason we don't have calibrated data */
if (!gpadc->cal_data[ADC_INPUT_VMAIN].gain) {
res = ADC_CH_CHG_V_MIN + (ADC_CH_CHG_V_MAX -
ADC_CH_CHG_V_MIN) * ad_value /
ADC_RESOLUTION;
break;
}
/* Here we can use the calibrated data */
res = (int) (ad_value * gpadc->cal_data[ADC_INPUT_VMAIN].gain +
gpadc->cal_data[ADC_INPUT_VMAIN].offset) / CALIB_SCALE;
break;
case XTAL_TEMP:
case BAT_CTRL:
case BTEMP_BALL:
case ACC_DETECT1:
case ADC_AUX1:
case ADC_AUX2:
/* For some reason we don't have calibrated data */
if (!gpadc->cal_data[ADC_INPUT_BTEMP].gain) {
res = ADC_CH_BTEMP_MIN + (ADC_CH_BTEMP_MAX -
ADC_CH_BTEMP_MIN) * ad_value /
ADC_RESOLUTION;
break;
}
/* Here we can use the calibrated data */
res = (int) (ad_value * gpadc->cal_data[ADC_INPUT_BTEMP].gain +
gpadc->cal_data[ADC_INPUT_BTEMP].offset) / CALIB_SCALE;
break;
case MAIN_BAT_V:
case VBAT_TRUE_MEAS:
/* For some reason we don't have calibrated data */
if (!gpadc->cal_data[ADC_INPUT_VBAT].gain) {
res = ADC_CH_VBAT_MIN + (ADC_CH_VBAT_MAX -
ADC_CH_VBAT_MIN) * ad_value /
ADC_RESOLUTION;
break;
}
/* Here we can use the calibrated data */
res = (int) (ad_value * gpadc->cal_data[ADC_INPUT_VBAT].gain +
gpadc->cal_data[ADC_INPUT_VBAT].offset) / CALIB_SCALE;
break;
case DIE_TEMP:
res = ADC_CH_DIETEMP_MIN +
(ADC_CH_DIETEMP_MAX - ADC_CH_DIETEMP_MIN) * ad_value /
ADC_RESOLUTION;
break;
case ACC_DETECT2:
res = ADC_CH_ACCDET2_MIN +
(ADC_CH_ACCDET2_MAX - ADC_CH_ACCDET2_MIN) * ad_value /
ADC_RESOLUTION;
break;
case VBUS_V:
res = ADC_CH_CHG_V_MIN +
(ADC_CH_CHG_V_MAX - ADC_CH_CHG_V_MIN) * ad_value /
ADC_RESOLUTION;
break;
case MAIN_CHARGER_C:
case USB_CHARGER_C:
res = ADC_CH_CHG_I_MIN +
(ADC_CH_CHG_I_MAX - ADC_CH_CHG_I_MIN) * ad_value /
ADC_RESOLUTION;
break;
case BK_BAT_V:
res = ADC_CH_BKBAT_MIN +
(ADC_CH_BKBAT_MAX - ADC_CH_BKBAT_MIN) * ad_value /
ADC_RESOLUTION;
break;
case IBAT_VIRTUAL_CHANNEL:
/* For some reason we don't have calibrated data */
if (!gpadc->cal_data[ADC_INPUT_IBAT].gain) {
res = ADC_CH_IBAT_MIN + (ADC_CH_IBAT_MAX -
ADC_CH_IBAT_MIN) * ad_value /
ADC_RESOLUTION;
break;
}
/* Here we can use the calibrated data */
res = (int) (ad_value * gpadc->cal_data[ADC_INPUT_IBAT].gain +
gpadc->cal_data[ADC_INPUT_IBAT].offset)
>> CALIB_SHIFT_IBAT;
break;
default:
dev_err(gpadc->dev,
"unknown channel, not possible to convert\n");
res = -EINVAL;
break;
}
return res;
}
EXPORT_SYMBOL(ab8500_gpadc_ad_to_voltage);
/**
* ab8500_gpadc_sw_hw_convert() - gpadc conversion
* @channel: analog channel to be converted to digital data
* @avg_sample: number of ADC sample to average
* @trig_egde: selected ADC trig edge
* @trig_timer: selected ADC trigger delay timer
* @conv_type: selected conversion type (HW or SW conversion)
*
* This function converts the selected analog i/p to digital
* data.
*/
int ab8500_gpadc_sw_hw_convert(struct ab8500_gpadc *gpadc, u8 channel,
u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type)
{
int ad_value;
int voltage;
ad_value = ab8500_gpadc_read_raw(gpadc, channel, avg_sample,
trig_edge, trig_timer, conv_type);
/* On failure retry a second time */
if (ad_value < 0)
ad_value = ab8500_gpadc_read_raw(gpadc, channel, avg_sample,
trig_edge, trig_timer, conv_type);
if (ad_value < 0) {
dev_err(gpadc->dev, "GPADC raw value failed ch: %d\n",
channel);
return ad_value;
}
voltage = ab8500_gpadc_ad_to_voltage(gpadc, channel, ad_value);
if (voltage < 0)
dev_err(gpadc->dev, "GPADC to voltage conversion failed ch:"
" %d AD: 0x%x\n", channel, ad_value);
return voltage;
}
EXPORT_SYMBOL(ab8500_gpadc_sw_hw_convert);
/**
* ab8500_gpadc_read_raw() - gpadc read
* @channel: analog channel to be read
* @avg_sample: number of ADC sample to average
* @trig_edge: selected trig edge
* @trig_timer: selected ADC trigger delay timer
* @conv_type: selected conversion type (HW or SW conversion)
*
* This function obtains the raw ADC value for an hardware conversion,
* this then needs to be converted by calling ab8500_gpadc_ad_to_voltage()
*/
int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type)
{
int raw_data;
raw_data = ab8500_gpadc_double_read_raw(gpadc, channel,
avg_sample, trig_edge, trig_timer, conv_type, NULL);
return raw_data;
}
int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type,
int *ibat)
{
int ret;
int looplimit = 0;
unsigned long completion_timeout;
u8 val, low_data, high_data, low_data2, high_data2;
u8 val_reg1 = 0;
unsigned int delay_min = 0;
unsigned int delay_max = 0;
u8 data_low_addr, data_high_addr;
if (!gpadc)
return -ENODEV;
/* check if convertion is supported */
if ((gpadc->irq_sw < 0) && (conv_type == ADC_SW))
return -ENOTSUPP;
if ((gpadc->irq_hw < 0) && (conv_type == ADC_HW))
return -ENOTSUPP;
mutex_lock(&gpadc->ab8500_gpadc_lock);
/* Enable VTVout LDO this is required for GPADC */
pm_runtime_get_sync(gpadc->dev);
/* Check if ADC is not busy, lock and proceed */
do {
ret = abx500_get_register_interruptible(gpadc->dev,
AB8500_GPADC, AB8500_GPADC_STAT_REG, &val);
if (ret < 0)
goto out;
if (!(val & GPADC_BUSY))
break;
msleep(10);
} while (++looplimit < 10);
if (looplimit >= 10 && (val & GPADC_BUSY)) {
dev_err(gpadc->dev, "gpadc_conversion: GPADC busy");
ret = -EINVAL;
goto out;
}
/* Enable GPADC */
val_reg1 |= EN_GPADC;
/* Select the channel source and set average samples */
switch (avg_sample) {
case SAMPLE_1:
val = channel | AVG_1;
break;
case SAMPLE_4:
val = channel | AVG_4;
break;
case SAMPLE_8:
val = channel | AVG_8;
break;
default:
val = channel | AVG_16;
break;
}
if (conv_type == ADC_HW) {
ret = abx500_set_register_interruptible(gpadc->dev,
AB8500_GPADC, AB8500_GPADC_CTRL3_REG, val);
val_reg1 |= EN_TRIG_EDGE;
if (trig_edge)
val_reg1 |= EN_FALLING;
}
else
ret = abx500_set_register_interruptible(gpadc->dev,
AB8500_GPADC, AB8500_GPADC_CTRL2_REG, val);
if (ret < 0) {
dev_err(gpadc->dev,
"gpadc_conversion: set avg samples failed\n");
goto out;
}
/*
* Enable ADC, buffering, select rising edge and enable ADC path
* charging current sense if it needed, ABB 3.0 needs some special
* treatment too.
*/
switch (channel) {
case MAIN_CHARGER_C:
case USB_CHARGER_C:
val_reg1 |= EN_BUF | EN_ICHAR;
break;
case BTEMP_BALL:
if (!is_ab8500_2p0_or_earlier(gpadc->parent)) {
val_reg1 |= EN_BUF | BTEMP_PULL_UP;
/*
* Delay might be needed for ABB8500 cut 3.0, if not,
* remove when hardware will be availible
*/
delay_min = 1000; /* Delay in micro seconds */
delay_max = 10000; /* large range to optimise sleep mode */
break;
}
/* Intentional fallthrough */
default:
val_reg1 |= EN_BUF;
break;
}
/* Write configuration to register */
ret = abx500_set_register_interruptible(gpadc->dev,
AB8500_GPADC, AB8500_GPADC_CTRL1_REG, val_reg1);
if (ret < 0) {
dev_err(gpadc->dev,
"gpadc_conversion: set Control register failed\n");
goto out;
}
if (delay_min != 0)
usleep_range(delay_min, delay_max);
if (conv_type == ADC_HW) {
/* Set trigger delay timer */
ret = abx500_set_register_interruptible(gpadc->dev,
AB8500_GPADC, AB8500_GPADC_AUTO_TIMER_REG, trig_timer);
if (ret < 0) {
dev_err(gpadc->dev,
"gpadc_conversion: trig timer failed\n");
goto out;
}
completion_timeout = 2 * HZ;
data_low_addr = AB8500_GPADC_AUTODATAL_REG;
data_high_addr = AB8500_GPADC_AUTODATAH_REG;
} else {
/* Start SW conversion */
ret = abx500_mask_and_set_register_interruptible(gpadc->dev,
AB8500_GPADC, AB8500_GPADC_CTRL1_REG,
ADC_SW_CONV, ADC_SW_CONV);
if (ret < 0) {
dev_err(gpadc->dev,
"gpadc_conversion: start s/w conv failed\n");
goto out;
}
completion_timeout = msecs_to_jiffies(CONVERSION_TIME);
data_low_addr = AB8500_GPADC_MANDATAL_REG;
data_high_addr = AB8500_GPADC_MANDATAH_REG;
}
/* wait for completion of conversion */
if (!wait_for_completion_timeout(&gpadc->ab8500_gpadc_complete,
completion_timeout)) {
dev_err(gpadc->dev,
"timeout didn't receive GPADC conv interrupt\n");
ret = -EINVAL;
goto out;
}
/* Read the converted RAW data */
ret = abx500_get_register_interruptible(gpadc->dev,
AB8500_GPADC, data_low_addr, &low_data);
if (ret < 0) {
dev_err(gpadc->dev, "gpadc_conversion: read low data failed\n");
goto out;
}
ret = abx500_get_register_interruptible(gpadc->dev,
AB8500_GPADC, data_high_addr, &high_data);
if (ret < 0) {
dev_err(gpadc->dev, "gpadc_conversion: read high data failed\n");
goto out;
}
/* Check if double convertion is required */
if ((channel == BAT_CTRL_AND_IBAT) ||
(channel == VBAT_MEAS_AND_IBAT) ||
(channel == VBAT_TRUE_MEAS_AND_IBAT) ||
(channel == BAT_TEMP_AND_IBAT)) {
if (conv_type == ADC_HW) {
/* not supported */
ret = -ENOTSUPP;
dev_err(gpadc->dev,
"gpadc_conversion: only SW double conversion supported\n");
goto out;
} else {
/* Read the converted RAW data 2 */
ret = abx500_get_register_interruptible(gpadc->dev,
AB8500_GPADC, AB8540_GPADC_MANDATA2L_REG,
&low_data2);
if (ret < 0) {
dev_err(gpadc->dev,
"gpadc_conversion: read sw low data 2 failed\n");
goto out;
}
ret = abx500_get_register_interruptible(gpadc->dev,
AB8500_GPADC, AB8540_GPADC_MANDATA2H_REG,
&high_data2);
if (ret < 0) {
dev_err(gpadc->dev,
"gpadc_conversion: read sw high data 2 failed\n");
goto out;
}
if (ibat != NULL) {
*ibat = (high_data2 << 8) | low_data2;
} else {
dev_warn(gpadc->dev,
"gpadc_conversion: ibat not stored\n");
}
}
}
/* Disable GPADC */
ret = abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC,
AB8500_GPADC_CTRL1_REG, DIS_GPADC);
if (ret < 0) {
dev_err(gpadc->dev, "gpadc_conversion: disable gpadc failed\n");
goto out;
}
/* Disable VTVout LDO this is required for GPADC */
pm_runtime_mark_last_busy(gpadc->dev);
pm_runtime_put_autosuspend(gpadc->dev);
mutex_unlock(&gpadc->ab8500_gpadc_lock);
return (high_data << 8) | low_data;
out:
/*
* It has shown to be needed to turn off the GPADC if an error occurs,
* otherwise we might have problem when waiting for the busy bit in the
* GPADC status register to go low. In V1.1 there wait_for_completion
* seems to timeout when waiting for an interrupt.. Not seen in V2.0
*/
(void) abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC,
AB8500_GPADC_CTRL1_REG, DIS_GPADC);
pm_runtime_put(gpadc->dev);
mutex_unlock(&gpadc->ab8500_gpadc_lock);
dev_err(gpadc->dev,
"gpadc_conversion: Failed to AD convert channel %d\n", channel);
return ret;
}
EXPORT_SYMBOL(ab8500_gpadc_read_raw);
/**
* ab8500_bm_gpadcconvend_handler() - isr for gpadc conversion completion
* @irq: irq number
* @data: pointer to the data passed during request irq
*
* This is a interrupt service routine for gpadc conversion completion.
* Notifies the gpadc completion is completed and the converted raw value
* can be read from the registers.
* Returns IRQ status(IRQ_HANDLED)
*/
static irqreturn_t ab8500_bm_gpadcconvend_handler(int irq, void *_gpadc)
{
struct ab8500_gpadc *gpadc = _gpadc;
complete(&gpadc->ab8500_gpadc_complete);
return IRQ_HANDLED;
}
static int otp_cal_regs[] = {
AB8500_GPADC_CAL_1,
AB8500_GPADC_CAL_2,
AB8500_GPADC_CAL_3,
AB8500_GPADC_CAL_4,
AB8500_GPADC_CAL_5,
AB8500_GPADC_CAL_6,
AB8500_GPADC_CAL_7,
};
static int otp4_cal_regs[] = {
AB8540_GPADC_OTP4_REG_7,
AB8540_GPADC_OTP4_REG_6,
AB8540_GPADC_OTP4_REG_5,
};
static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc)
{
int i;
int ret[ARRAY_SIZE(otp_cal_regs)];
u8 gpadc_cal[ARRAY_SIZE(otp_cal_regs)];
int ret_otp4[ARRAY_SIZE(otp4_cal_regs)];
u8 gpadc_otp4[ARRAY_SIZE(otp4_cal_regs)];
int vmain_high, vmain_low;
int btemp_high, btemp_low;
int vbat_high, vbat_low;
int ibat_high, ibat_low;
s64 V_gain, V_offset, V2A_gain, V2A_offset;
struct ab8500 *ab8500;
ab8500 = gpadc->parent;
/* First we read all OTP registers and store the error code */
for (i = 0; i < ARRAY_SIZE(otp_cal_regs); i++) {
ret[i] = abx500_get_register_interruptible(gpadc->dev,
AB8500_OTP_EMUL, otp_cal_regs[i], &gpadc_cal[i]);
if (ret[i] < 0)
dev_err(gpadc->dev, "%s: read otp reg 0x%02x failed\n",
__func__, otp_cal_regs[i]);
}
/*
* The ADC calibration data is stored in OTP registers.
* The layout of the calibration data is outlined below and a more
* detailed description can be found in UM0836
*
* vm_h/l = vmain_high/low
* bt_h/l = btemp_high/low
* vb_h/l = vbat_high/low
*
* Data bits 8500/9540:
* | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0
* |.......|.......|.......|.......|.......|.......|.......|.......
* | | vm_h9 | vm_h8
* |.......|.......|.......|.......|.......|.......|.......|.......
* | | vm_h7 | vm_h6 | vm_h5 | vm_h4 | vm_h3 | vm_h2
* |.......|.......|.......|.......|.......|.......|.......|.......
* | vm_h1 | vm_h0 | vm_l4 | vm_l3 | vm_l2 | vm_l1 | vm_l0 | bt_h9
* |.......|.......|.......|.......|.......|.......|.......|.......
* | bt_h8 | bt_h7 | bt_h6 | bt_h5 | bt_h4 | bt_h3 | bt_h2 | bt_h1
* |.......|.......|.......|.......|.......|.......|.......|.......
* | bt_h0 | bt_l4 | bt_l3 | bt_l2 | bt_l1 | bt_l0 | vb_h9 | vb_h8
* |.......|.......|.......|.......|.......|.......|.......|.......
* | vb_h7 | vb_h6 | vb_h5 | vb_h4 | vb_h3 | vb_h2 | vb_h1 | vb_h0
* |.......|.......|.......|.......|.......|.......|.......|.......
* | vb_l5 | vb_l4 | vb_l3 | vb_l2 | vb_l1 | vb_l0 |
* |.......|.......|.......|.......|.......|.......|.......|.......
*
* Data bits 8540:
* OTP2
* | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0
* |.......|.......|.......|.......|.......|.......|.......|.......
* |
* |.......|.......|.......|.......|.......|.......|.......|.......
* | vm_h9 | vm_h8 | vm_h7 | vm_h6 | vm_h5 | vm_h4 | vm_h3 | vm_h2
* |.......|.......|.......|.......|.......|.......|.......|.......
* | vm_h1 | vm_h0 | vm_l4 | vm_l3 | vm_l2 | vm_l1 | vm_l0 | bt_h9
* |.......|.......|.......|.......|.......|.......|.......|.......
* | bt_h8 | bt_h7 | bt_h6 | bt_h5 | bt_h4 | bt_h3 | bt_h2 | bt_h1
* |.......|.......|.......|.......|.......|.......|.......|.......
* | bt_h0 | bt_l4 | bt_l3 | bt_l2 | bt_l1 | bt_l0 | vb_h9 | vb_h8
* |.......|.......|.......|.......|.......|.......|.......|.......
* | vb_h7 | vb_h6 | vb_h5 | vb_h4 | vb_h3 | vb_h2 | vb_h1 | vb_h0
* |.......|.......|.......|.......|.......|.......|.......|.......
* | vb_l5 | vb_l4 | vb_l3 | vb_l2 | vb_l1 | vb_l0 |
* |.......|.......|.......|.......|.......|.......|.......|.......
*
* Data bits 8540:
* OTP4
* | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0
* |.......|.......|.......|.......|.......|.......|.......|.......
* | | ib_h9 | ib_h8 | ib_h7
* |.......|.......|.......|.......|.......|.......|.......|.......
* | ib_h6 | ib_h5 | ib_h4 | ib_h3 | ib_h2 | ib_h1 | ib_h0 | ib_l5
* |.......|.......|.......|.......|.......|.......|.......|.......
* | ib_l4 | ib_l3 | ib_l2 | ib_l1 | ib_l0 |
*
*
* Ideal output ADC codes corresponding to injected input voltages
* during manufacturing is:
*
* vmain_high: Vin = 19500mV / ADC ideal code = 997
* vmain_low: Vin = 315mV / ADC ideal code = 16
* btemp_high: Vin = 1300mV / ADC ideal code = 985
* btemp_low: Vin = 21mV / ADC ideal code = 16
* vbat_high: Vin = 4700mV / ADC ideal code = 982
* vbat_low: Vin = 2380mV / ADC ideal code = 33
*/
if (is_ab8540(ab8500)) {
/* Calculate gain and offset for VMAIN if all reads succeeded*/
if (!(ret[1] < 0 || ret[2] < 0)) {
vmain_high = (((gpadc_cal[1] & 0xFF) << 2) |
((gpadc_cal[2] & 0xC0) >> 6));
vmain_low = ((gpadc_cal[2] & 0x3E) >> 1);
gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_hi =
(u16)vmain_high;
gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_lo =
(u16)vmain_low;
gpadc->cal_data[ADC_INPUT_VMAIN].gain = CALIB_SCALE *
(19500 - 315) / (vmain_high - vmain_low);
gpadc->cal_data[ADC_INPUT_VMAIN].offset = CALIB_SCALE *
19500 - (CALIB_SCALE * (19500 - 315) /
(vmain_high - vmain_low)) * vmain_high;
} else {
gpadc->cal_data[ADC_INPUT_VMAIN].gain = 0;
}
/* Read IBAT calibration Data */
for (i = 0; i < ARRAY_SIZE(otp4_cal_regs); i++) {
ret_otp4[i] = abx500_get_register_interruptible(
gpadc->dev, AB8500_OTP_EMUL,
otp4_cal_regs[i], &gpadc_otp4[i]);
if (ret_otp4[i] < 0)
dev_err(gpadc->dev,
"%s: read otp4 reg 0x%02x failed\n",
__func__, otp4_cal_regs[i]);
}
/* Calculate gain and offset for IBAT if all reads succeeded */
if (!(ret_otp4[0] < 0 || ret_otp4[1] < 0 || ret_otp4[2] < 0)) {
ibat_high = (((gpadc_otp4[0] & 0x07) << 7) |
((gpadc_otp4[1] & 0xFE) >> 1));
ibat_low = (((gpadc_otp4[1] & 0x01) << 5) |
((gpadc_otp4[2] & 0xF8) >> 3));
gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_hi =
(u16)ibat_high;
gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_lo =
(u16)ibat_low;
V_gain = ((IBAT_VDROP_H - IBAT_VDROP_L)
<< CALIB_SHIFT_IBAT) / (ibat_high - ibat_low);
V_offset = (IBAT_VDROP_H << CALIB_SHIFT_IBAT) -
(((IBAT_VDROP_H - IBAT_VDROP_L) <<
CALIB_SHIFT_IBAT) / (ibat_high - ibat_low))
* ibat_high;
/*
* Result obtained is in mV (at a scale factor),
* we need to calculate gain and offset to get mA
*/
V2A_gain = (ADC_CH_IBAT_MAX - ADC_CH_IBAT_MIN)/
(ADC_CH_IBAT_MAX_V - ADC_CH_IBAT_MIN_V);
V2A_offset = ((ADC_CH_IBAT_MAX_V * ADC_CH_IBAT_MIN -
ADC_CH_IBAT_MAX * ADC_CH_IBAT_MIN_V)
<< CALIB_SHIFT_IBAT)
/ (ADC_CH_IBAT_MAX_V - ADC_CH_IBAT_MIN_V);
gpadc->cal_data[ADC_INPUT_IBAT].gain = V_gain * V2A_gain;
gpadc->cal_data[ADC_INPUT_IBAT].offset = V_offset *
V2A_gain + V2A_offset;
} else {
gpadc->cal_data[ADC_INPUT_IBAT].gain = 0;
}
dev_dbg(gpadc->dev, "IBAT gain %llu offset %llu\n",
gpadc->cal_data[ADC_INPUT_IBAT].gain,
gpadc->cal_data[ADC_INPUT_IBAT].offset);
} else {
/* Calculate gain and offset for VMAIN if all reads succeeded */
if (!(ret[0] < 0 || ret[1] < 0 || ret[2] < 0)) {
vmain_high = (((gpadc_cal[0] & 0x03) << 8) |
((gpadc_cal[1] & 0x3F) << 2) |
((gpadc_cal[2] & 0xC0) >> 6));
vmain_low = ((gpadc_cal[2] & 0x3E) >> 1);
gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_hi =
(u16)vmain_high;
gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_lo =
(u16)vmain_low;
gpadc->cal_data[ADC_INPUT_VMAIN].gain = CALIB_SCALE *
(19500 - 315) / (vmain_high - vmain_low);
gpadc->cal_data[ADC_INPUT_VMAIN].offset = CALIB_SCALE *
19500 - (CALIB_SCALE * (19500 - 315) /
(vmain_high - vmain_low)) * vmain_high;
} else {
gpadc->cal_data[ADC_INPUT_VMAIN].gain = 0;
}
}
/* Calculate gain and offset for BTEMP if all reads succeeded */
if (!(ret[2] < 0 || ret[3] < 0 || ret[4] < 0)) {
btemp_high = (((gpadc_cal[2] & 0x01) << 9) |
(gpadc_cal[3] << 1) | ((gpadc_cal[4] & 0x80) >> 7));
btemp_low = ((gpadc_cal[4] & 0x7C) >> 2);
gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_hi = (u16)btemp_high;
gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_lo = (u16)btemp_low;
gpadc->cal_data[ADC_INPUT_BTEMP].gain =
CALIB_SCALE * (1300 - 21) / (btemp_high - btemp_low);
gpadc->cal_data[ADC_INPUT_BTEMP].offset = CALIB_SCALE * 1300 -
(CALIB_SCALE * (1300 - 21) / (btemp_high - btemp_low))
* btemp_high;
} else {
gpadc->cal_data[ADC_INPUT_BTEMP].gain = 0;
}
/* Calculate gain and offset for VBAT if all reads succeeded */
if (!(ret[4] < 0 || ret[5] < 0 || ret[6] < 0)) {
vbat_high = (((gpadc_cal[4] & 0x03) << 8) | gpadc_cal[5]);
vbat_low = ((gpadc_cal[6] & 0xFC) >> 2);
gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_hi = (u16)vbat_high;
gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_lo = (u16)vbat_low;
gpadc->cal_data[ADC_INPUT_VBAT].gain = CALIB_SCALE *
(4700 - 2380) / (vbat_high - vbat_low);
gpadc->cal_data[ADC_INPUT_VBAT].offset = CALIB_SCALE * 4700 -
(CALIB_SCALE * (4700 - 2380) /
(vbat_high - vbat_low)) * vbat_high;
} else {
gpadc->cal_data[ADC_INPUT_VBAT].gain = 0;
}
dev_dbg(gpadc->dev, "VMAIN gain %llu offset %llu\n",
gpadc->cal_data[ADC_INPUT_VMAIN].gain,
gpadc->cal_data[ADC_INPUT_VMAIN].offset);
dev_dbg(gpadc->dev, "BTEMP gain %llu offset %llu\n",
gpadc->cal_data[ADC_INPUT_BTEMP].gain,
gpadc->cal_data[ADC_INPUT_BTEMP].offset);
dev_dbg(gpadc->dev, "VBAT gain %llu offset %llu\n",
gpadc->cal_data[ADC_INPUT_VBAT].gain,
gpadc->cal_data[ADC_INPUT_VBAT].offset);
}
#ifdef CONFIG_PM
static int ab8500_gpadc_runtime_suspend(struct device *dev)
{
struct ab8500_gpadc *gpadc = dev_get_drvdata(dev);
regulator_disable(gpadc->regu);
return 0;
}
static int ab8500_gpadc_runtime_resume(struct device *dev)
{
struct ab8500_gpadc *gpadc = dev_get_drvdata(dev);
int ret;
ret = regulator_enable(gpadc->regu);
if (ret)
dev_err(dev, "Failed to enable vtvout LDO: %d\n", ret);
return ret;
}
#endif
#ifdef CONFIG_PM_SLEEP
static int ab8500_gpadc_suspend(struct device *dev)
{
struct ab8500_gpadc *gpadc = dev_get_drvdata(dev);
mutex_lock(&gpadc->ab8500_gpadc_lock);
pm_runtime_get_sync(dev);
regulator_disable(gpadc->regu);
return 0;
}
static int ab8500_gpadc_resume(struct device *dev)
{
struct ab8500_gpadc *gpadc = dev_get_drvdata(dev);
int ret;
ret = regulator_enable(gpadc->regu);
if (ret)
dev_err(dev, "Failed to enable vtvout LDO: %d\n", ret);
pm_runtime_mark_last_busy(gpadc->dev);
pm_runtime_put_autosuspend(gpadc->dev);
mutex_unlock(&gpadc->ab8500_gpadc_lock);
return ret;
}
#endif
static int ab8500_gpadc_probe(struct platform_device *pdev)
{
int ret = 0;
struct ab8500_gpadc *gpadc;
gpadc = devm_kzalloc(&pdev->dev, sizeof(struct ab8500_gpadc), GFP_KERNEL);
if (!gpadc) {
dev_err(&pdev->dev, "Error: No memory\n");
return -ENOMEM;
}
gpadc->irq_sw = platform_get_irq_byname(pdev, "SW_CONV_END");
if (gpadc->irq_sw < 0)
dev_err(gpadc->dev, "failed to get platform sw_conv_end irq\n");
gpadc->irq_hw = platform_get_irq_byname(pdev, "HW_CONV_END");
if (gpadc->irq_hw < 0)
dev_err(gpadc->dev, "failed to get platform hw_conv_end irq\n");
gpadc->dev = &pdev->dev;
gpadc->parent = dev_get_drvdata(pdev->dev.parent);
mutex_init(&gpadc->ab8500_gpadc_lock);
/* Initialize completion used to notify completion of conversion */
init_completion(&gpadc->ab8500_gpadc_complete);
/* Register interrupts */
if (gpadc->irq_sw >= 0) {
ret = request_threaded_irq(gpadc->irq_sw, NULL,
ab8500_bm_gpadcconvend_handler,
IRQF_NO_SUSPEND | IRQF_SHARED | IRQF_ONESHOT,
"ab8500-gpadc-sw",
gpadc);
if (ret < 0) {
dev_err(gpadc->dev,
"Failed to register interrupt irq: %d\n",
gpadc->irq_sw);
goto fail;
}
}
if (gpadc->irq_hw >= 0) {
ret = request_threaded_irq(gpadc->irq_hw, NULL,
ab8500_bm_gpadcconvend_handler,
IRQF_NO_SUSPEND | IRQF_SHARED | IRQF_ONESHOT,
"ab8500-gpadc-hw",
gpadc);
if (ret < 0) {
dev_err(gpadc->dev,
"Failed to register interrupt irq: %d\n",
gpadc->irq_hw);
goto fail_irq;
}
}
/* VTVout LDO used to power up ab8500-GPADC */
gpadc->regu = devm_regulator_get(&pdev->dev, "vddadc");
if (IS_ERR(gpadc->regu)) {
ret = PTR_ERR(gpadc->regu);
dev_err(gpadc->dev, "failed to get vtvout LDO\n");
goto fail_irq;
}
platform_set_drvdata(pdev, gpadc);
ret = regulator_enable(gpadc->regu);
if (ret) {
dev_err(gpadc->dev, "Failed to enable vtvout LDO: %d\n", ret);
goto fail_enable;
}
pm_runtime_set_autosuspend_delay(gpadc->dev, GPADC_AUDOSUSPEND_DELAY);
pm_runtime_use_autosuspend(gpadc->dev);
pm_runtime_set_active(gpadc->dev);
pm_runtime_enable(gpadc->dev);
ab8500_gpadc_read_calibration_data(gpadc);
list_add_tail(&gpadc->node, &ab8500_gpadc_list);
dev_dbg(gpadc->dev, "probe success\n");
return 0;
fail_enable:
fail_irq:
free_irq(gpadc->irq_sw, gpadc);
free_irq(gpadc->irq_hw, gpadc);
fail:
return ret;
}
static int ab8500_gpadc_remove(struct platform_device *pdev)
{
struct ab8500_gpadc *gpadc = platform_get_drvdata(pdev);
/* remove this gpadc entry from the list */
list_del(&gpadc->node);
/* remove interrupt - completion of Sw ADC conversion */
if (gpadc->irq_sw >= 0)
free_irq(gpadc->irq_sw, gpadc);
if (gpadc->irq_hw >= 0)
free_irq(gpadc->irq_hw, gpadc);
pm_runtime_get_sync(gpadc->dev);
pm_runtime_disable(gpadc->dev);
regulator_disable(gpadc->regu);
pm_runtime_set_suspended(gpadc->dev);
pm_runtime_put_noidle(gpadc->dev);
return 0;
}
static const struct dev_pm_ops ab8500_gpadc_pm_ops = {
SET_RUNTIME_PM_OPS(ab8500_gpadc_runtime_suspend,
ab8500_gpadc_runtime_resume,
NULL)
SET_SYSTEM_SLEEP_PM_OPS(ab8500_gpadc_suspend,
ab8500_gpadc_resume)
};
static struct platform_driver ab8500_gpadc_driver = {
.probe = ab8500_gpadc_probe,
.remove = ab8500_gpadc_remove,
.driver = {
.name = "ab8500-gpadc",
.pm = &ab8500_gpadc_pm_ops,
},
};
static int __init ab8500_gpadc_init(void)
{
return platform_driver_register(&ab8500_gpadc_driver);
}
static void __exit ab8500_gpadc_exit(void)
{
platform_driver_unregister(&ab8500_gpadc_driver);
}
/**
* ab8540_gpadc_get_otp() - returns OTP values
*
*/
void ab8540_gpadc_get_otp(struct ab8500_gpadc *gpadc,
u16 *vmain_l, u16 *vmain_h, u16 *btemp_l, u16 *btemp_h,
u16 *vbat_l, u16 *vbat_h, u16 *ibat_l, u16 *ibat_h)
{
*vmain_l = gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_lo;
*vmain_h = gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_hi;
*btemp_l = gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_lo;
*btemp_h = gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_hi;
*vbat_l = gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_lo;
*vbat_h = gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_hi;
*ibat_l = gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_lo;
*ibat_h = gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_hi;
return ;
}
subsys_initcall_sync(ab8500_gpadc_init);
module_exit(ab8500_gpadc_exit);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Arun R Murthy, Daniel Willerud, Johan Palsson,"
"M'boumba Cedric Madianga");
MODULE_ALIAS("platform:ab8500_gpadc");
MODULE_DESCRIPTION("AB8500 GPADC driver");