1. 根目录:
2. drivers
3. staging
4. rtl8723au
5. hal
6. HalPwrSeqCmd.c

/******************************************************************************
 *
 * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
 * more details.
 *
 ******************************************************************************/
/*++
Copyright (c) Realtek Semiconductor Corp. All rights reserved.

Module Name:
	HalPwrSeqCmd.c

Abstract:
	Implement HW Power sequence configuration CMD handling routine for
	Realtek devices.

Major Change History:
	When       Who               What
	---------- ---------------   -------------------------------
	2011-10-26 Lucas            Modify to be compatible with SD4-CE driver.
	2011-07-07 Roger            Create.

--*/
#include <HalPwrSeqCmd.h>
#include <usb_ops_linux.h>

/*  */
/*	Description: */
/*		This routine deal with the Power Configuration CMDs parsing
		for RTL8723/RTL8188E Series IC. */
/*  */
/*	Assumption: */
/*		We should follow specific format which was released from
		HW SD. */
/*  */
/*	2011.07.07, added by Roger. */
/*  */
u8 HalPwrSeqCmdParsing23a(struct rtw_adapter *padapter, u8 CutVersion,
		       u8 FabVersion, u8 InterfaceType,
		       struct wlan_pwr_cfg PwrSeqCmd[])
{
	struct wlan_pwr_cfg PwrCfgCmd;
	u8 bPollingBit;
	u32 AryIdx = 0;
	u8 value;
	u32 offset;
	u32 pollingCount = 0;	/*  polling autoload done. */
	u32 maxPollingCnt = 5000;

	do {
		PwrCfgCmd = PwrSeqCmd[AryIdx];

		RT_TRACE(_module_hal_init_c_, _drv_info_,
			 "HalPwrSeqCmdParsing23a: offset(%#x) cut_msk(%#x) fab_msk(%#x) interface_msk(%#x) base(%#x) cmd(%#x) msk(%#x) value(%#x)\n",
			 GET_PWR_CFG_OFFSET(PwrCfgCmd),
			 GET_PWR_CFG_CUT_MASK(PwrCfgCmd),
			 GET_PWR_CFG_FAB_MASK(PwrCfgCmd),
			 GET_PWR_CFG_INTF_MASK(PwrCfgCmd),
			 GET_PWR_CFG_BASE(PwrCfgCmd),
			 GET_PWR_CFG_CMD(PwrCfgCmd),
			 GET_PWR_CFG_MASK(PwrCfgCmd),
			 GET_PWR_CFG_VALUE(PwrCfgCmd));

		/* 2 Only Handle the command whose FAB, CUT, and Interface are
		   matched */
		if ((GET_PWR_CFG_FAB_MASK(PwrCfgCmd) & FabVersion) &&
		    (GET_PWR_CFG_CUT_MASK(PwrCfgCmd) & CutVersion) &&
		    (GET_PWR_CFG_INTF_MASK(PwrCfgCmd) & InterfaceType)) {
			switch (GET_PWR_CFG_CMD(PwrCfgCmd)) {
			case PWR_CMD_READ:
				RT_TRACE(_module_hal_init_c_, _drv_info_,
					 "HalPwrSeqCmdParsing23a: PWR_CMD_READ\n");
				break;

			case PWR_CMD_WRITE:
				RT_TRACE(_module_hal_init_c_, _drv_info_,
					 "HalPwrSeqCmdParsing23a: PWR_CMD_WRITE\n");
				offset = GET_PWR_CFG_OFFSET(PwrCfgCmd);

				/*  Read the value from system register */
				value = rtl8723au_read8(padapter, offset);

				value &= ~(GET_PWR_CFG_MASK(PwrCfgCmd));
				value |= (GET_PWR_CFG_VALUE(PwrCfgCmd) &
					  GET_PWR_CFG_MASK(PwrCfgCmd));

				/*  Write the value back to system register */
				rtl8723au_write8(padapter, offset, value);
				break;

			case PWR_CMD_POLLING:
				RT_TRACE(_module_hal_init_c_, _drv_info_,
					 "HalPwrSeqCmdParsing23a: PWR_CMD_POLLING\n");

				bPollingBit = false;
				offset = GET_PWR_CFG_OFFSET(PwrCfgCmd);
				do {
					value = rtl8723au_read8(padapter,
								offset);

					value &= GET_PWR_CFG_MASK(PwrCfgCmd);
					if (value ==
					    (GET_PWR_CFG_VALUE(PwrCfgCmd) &
					     GET_PWR_CFG_MASK(PwrCfgCmd)))
						bPollingBit = true;
					else
						udelay(10);

					if (pollingCount++ > maxPollingCnt) {
						DBG_8723A("Fail to polling "
							  "Offset[%#x]\n",
							  offset);
						return false;
					}
				} while (!bPollingBit);

				break;

			case PWR_CMD_DELAY:
				RT_TRACE(_module_hal_init_c_, _drv_info_,
					 "HalPwrSeqCmdParsing23a: PWR_CMD_DELAY\n");
				if (GET_PWR_CFG_VALUE(PwrCfgCmd) ==
				    PWRSEQ_DELAY_US)
					udelay(GET_PWR_CFG_OFFSET(PwrCfgCmd));
				else
					udelay(GET_PWR_CFG_OFFSET(PwrCfgCmd) *
					       1000);
				break;

			case PWR_CMD_END:
				/*  When this command is parsed, end
				    the process */
				RT_TRACE(_module_hal_init_c_, _drv_info_,
					 "HalPwrSeqCmdParsing23a: PWR_CMD_END\n");
				return true;

			default:
				RT_TRACE(_module_hal_init_c_, _drv_err_,
					 "HalPwrSeqCmdParsing23a: Unknown CMD!!\n");
				break;
			}
		}

		AryIdx++;	/* Add Array Index */
	} while (1);

	return true;
}